Finding your suitable readers for zoeller 1/2 hp sump pump is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for zoeller 1/2 hp sump pump including detail information and customer reviews. Let’s find out which is your favorite one.
727 reviews analysed
1. Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Description
Product Description
FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity
From the Manufacturer
Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.
2. ZOELLER Sump Pump 1/2 hp 115V Model # M98
Description
Maximum Flow 72 GPM’ Off Point 3 Inches’ On Point 9 1/2 Inches, Operation Automatic, Water Flow @ 15 Feet of Head 45 GPM’ Water Flow @ 20 Feet of Head 25 GPM, Water Flow @ 5 Feet of Head 72 GPM, Shut Off 23 Feet, Maximum Solids 1/2 Inches, Top Cast Iron
3. Zoeller 267-0001 M267 Waste-Mate Sewage Pump, 1/2 Horsepower, 115V
Description
Product Description
This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in United States.
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
4. Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp
Description
Product Description
Zoeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller.
9ft. power cord. Truely a all star pump. Powder coated epoxy CI and SS fastners. Oil filled motor with thermal overload. CSA UL SSPMA
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
5. Zoeller 105-0001 Sump Pump 12.50 x 14.50 x 14.50 inches 19 Pound
Description
Product Description
105-0001 Features: -Drain pump package. -No filters to clog or maintain. -P-trap can be installed internally for compact installations. -Allows drainage from areas where gravity is not present. -Can be used with dishwashers, laundry trays and garbage disposals. -1 Year warranty. -Dimensions: 12.5" H x 14.5" W.
From the Manufacturer
Removes water from areas where gravity flow is not available. Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal applications. Glass-filled, polypropylene base with built in strainer on M53. Passes laundry lint and 1/2″ spherical solids
6. Zoeller 57-0001 M57 Basement High Capacity Sump Pump
7. Zoeller M63 Premium Series 5 Year Warranty Mighty-Mate Submersible Sump Pump, 1/3 Hp
Description
Foeller 63-0001 Features: Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology Corrosion-resistant, powder coated epoxy finish All cast iron construction Viton outer switch boot No sheet metal parts to rust or corrode Stainless steel screws, switch arm, guard and handle No screens to clog Watertight, neoprene square ring between motor and pump housing Solid, buoyant, polypropylene float Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor Upper and lower sleeve bearings running in bath of oil Entire unit pressure-tested after assembly Carbon and ceramic shaft seal Passes 1/2 spherical solids 1-1/2 NPT discharge On point: 7-1/4 Foeller 63-0001 Specifications: Height: 10-1/16″ Width: 10-1/16″ Motor: 3/10 HP Voltage: 115 RPM: 1550 Discharge Size: 1-1/2″ NPT Max Flow Rate: 43 gallons-per-minute Max Operating Temperature: 130*
8. Zoeller 267-0006 M267-25 2-inch Sump Pump with 25 foot cord, 1/2 Horsepower
Description
Product Description
This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in United States. When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability. Includes 25′ cord with plug.
9. WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Feature
- The product is manufactured in china
- Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- The product is highly durable and easy to use. 8 feet water resistant power cord
- Easy installation and easy handling. 120 V, PSC, Oil-Filled 3/4 HP Motor
- For Use In 11 inch. Diameter or Larger Sump Basins
Description
Product Description
3/4 hp, cast iron/stainless steel, submersible sump pump, with vertical switch, designed for 11 inch diameter or larger sump basin, pumps up to 4600 gph at 0′, durable cast iron volute, reliable, reinforced poly carbonate impeller, corrosion resistant stainless steel motor housing & fasteners, top suction design filters debris & minimizes clogging, oil filled, thermally protected motor prevents overheating, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 3/4 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups, 5 year warranty. This product is assembled in the USA. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
Conclusion
By our suggestions above, we hope that you can found Zoeller 12 Hp Sump Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
