Top 10 Water Cooling Loop Tools

Features:
Hard tube / Acrylic tube bending tool set. ABS multi-angle acrylic elbow molds for AWGM3 series, each group with a total of three. Suitable for 16mm rigid tubes. 16mm supporting tube outer diameter, 16MM acrylic tube hot bending assisted angular positioning. 45/90/180 curvature. The set consists of elbow molds with different angles of 45, 90 and 180 degrees. High strength ABS material. The positioning groove is accurate in angle and the mold is polished with high gloss to ensure the best contact between the finished product and the mold. Need enough heat to bend (such as a heat gun).
Specification:
Material: ABS
Color: Black
OD: 16mm / 0.63inch
Size: approx. 9.2 * 7.1 * 2.1cm / 3.62 * 2.8 * 0.83inch

Package list:
3 * Rigid Tube Bender Mould

A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.

Model: 3831109869796

The EK-Leak Tester is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Leak Tester does the job almost instantly!

The main body is a solid piece of CNC machined aluminum. One end is fitted with a revolvable male G1/4″ connection port so it can be directly screwed into any standard port in your liquid cooling loop. The gauge is custom made for liquid cooling loop testing purposes which clearly marks the safe pressure for testing. The other side of the tester is hooked up with a valve which will make sure that no air is escaping through the tester unit itself. The small pump for pressurizing the loop is also included.

In order to prevent damage to your liquid cooling loop, keep the pressure only in the predefined zone marked on the gauge. Please read the user manual before using the EK-Leak Tester!

Keep in mind that the pre-defined safe maximum pressure defined on the gauge is for EK products only. EK cannot guarantee for non-EK products failing under the predefined safe zone marked on the gauge.

Enclosed:

– EK-Leak tester
– Small pump

Model: 3831109816738

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18

2. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

3. Universal GPU block
Interface: G1 / 4 universal thread, diameter of 12.9mm
Material: Bottom: copper; Cover: POM high temperature materials
Waterway: 0.8MM parallel waterway
Compatibility: Matches a fan with a distance of 53 mm to 61 mm
Supported tube: 9.5mm ID / 12.7mm OD PU tube, or 10mmID / 16mmOD solid tube, or 8mmID / 12mmOD silicon tube (ID is the inner diameter, OD is the outer diameter)

4. Cylindrical Water Reservoir (including plastic bracket * 2, metal bracket * 2, screw pack * 1):
Water reservoir height: about 160mm
Water reservoir diameter: 5cm
Water reservoir interface: G1 / 4 universal thread
Interface diameter: 12.9mm

Package List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 100cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 100cm for ID 1/2” / 13mm HardTubes – blue Notice Due to the manufacturing process, the diameter can vary by 0.5 – 1mm.

Instructions for use:
First unscrew the plug on the water-cooling head module, then use the gas measuring device to align the water-cooling module clockwise and tighten it tightly, and then pull out the side-gas device extension tube to air into the water-cooling system.
Test method 1:
After the gas measuring equipment is connected to the water cooling system,pump air into the water cooling system until the barometer needle is positioned between 0.3bas and 0.4bas(it should not exceed 0.4bas, because the pressure is too hight, which may cause the pipe to fall off and other risks),and determine how much gas should be filled according to the size of the internal channel space.
Test method 2:Within 10 seconds,the barometer pointer will not swing back,indicating that the water cooling system sealing is normal,otherwise,indicating that there is a problem with the water cooling system sealing,need to check the leakage place.After installation,chack the tightness of the whole water cooling system.(Due to possible looseness of water pipes and joints,it`s necessary to re-confirm the tightness of each fittings and pipe body).
The Bykski-Leak Tester is a fast and safe way of testing for possible leaks in your liquid cooling loop.
The main body is a solid piece of CNC machined aluminum.
The gauge is custom made for liquid cooling loop testing purposes which clearly marks the safe pressure for testing.

XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.

Note:

No running without water when using.

Specification:

Pump parameters:

Thread: G1 / 4

Model: XHC8

Voltage: 12V

Power: 19W

Water flow: 800L/H

Water lift: approx. 5M / 16.4 ft

Power interface: large 4pin

Tank parameters:

Size: approx. 240 * 50 * 50 mm / 9.4 * 2 * 2 inch

Outside diameter: approx. 50mm / 2 inch

Inside diameter: approx. 40mm / 1.6 inch

Thread: G1 / 4
Product size: approx. 32 * 5 * 5 cm / 12.6 * 2 * 2 inch

Package List:

Water pump water tank *1

Plastic support *2

L support *2

Screw bag *1

Cotton pad *1

• Hard tube bending tool for 14mm OD tubing
• Timeless and sturdy design
• machined out of a solid piece of black POM acetal
• 45 & 90 degree moulds
• Can be mounted using pre drilled screw holes (no screws included)