914 reviews analysed
1. EVIL ENERGY 10FT 8AN 1/2" PTFE Fuel Line E85 Tube Nylon Stainless Steel Braided Universal Black (10.7mm ID)
- The 8AN PTFE fuel line mostly used in fuel system, transmission system, cooler system and pump. It is compatible with nearly every substance or agent used. Can be worked with E85, ethanol, petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel and etc. AN8 1/2″ nylon and stainless steel braided PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided CPE fuel line.
- Length: 10FT(3M). Inner Diameter: 0.42in (10.7mm). Outside Diameter: 0.57in (14.6mm). Please measure before purchase! Fit for 8AN PTFE hose end fitting ONLY.
- Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 2500 psi. Bursting Pressure (psi): 8000psi.
- 8AN Black nylon and stainless steel braided PTFE fuel line constructed with an all-black nylon fiber braided outer cover, stainless steel braided reinforcement and a seamless extruded Polytetrafluoroethylene(PTFE) resin inner tube.
- 8AN Polytetrafluoroethylene (PTFE) hose relatively hard, it can’t be bend and folding in half. Its surface is wax like which provides minimum resistance to flow. Sticky, viscous materials will not cling to it. A PTFE tube has less volumetric expansion than a rubber tube and is non age sensitive for an unlimited shelf life. 8AN 1/2″ PTFE fuel line Reference installation instruction is included. Professional installation is highly recommended.
2. Pacific Customs German Cloth Braided Vacuum Line Hose 3mm Inside Diameter Roughly 1/8 Inch Inside Diameter – 5 Meter Roll
German Cloth Braided Vacuum Line Hose 3mm Inside Diameter Roughly 1/8 Inch Inside Diameter – 5 Meter Roll
3. Spectre Performance 19110 5/32" Stainless Steel Flex Vacuum Line
4. Nylon Fuel Line Hose Oil Line Hose Gas Line 10FEET (Black, AN-6)
- Material: innter hose: CPE synthetic rubber
- The middle layer: 304 stainless steel wire mesh sleeve
- The outer layer: High quality braided nylon
- Inner Diameter: 0.34″/8.73mm
- Outside Diameter: 0.47″/13.89mm
- Working Pressure: 1000 PSI/69 Bar
- Burst Pressure: 6000 PSI/420 Bar
- Operating temperature: -40 Degree F to +350 Degree F
- You can use this line with racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant.
5. Spectre Performance 19198 5/32" Stainless Steel Flex Vacuum Line Kit
The Spectre 5/32 inch by 3 foot Vacuum Line Kit with Red/Blue Magna-Clamps features a stainless steel braided nitrile rubber hose and can be used on stock, street, race, show or any vehicle with universal application. For optimum fit and function this hose has been designed to be easily cut to length.
6. Spectre Performance 19190 5/32" Stainless Steel Vacuum Line Kit
7. High Performance Silicone Vacuum Tubing Hose, ID 0.12" (3mm), OD 0.27" (7mm), 3.3 Feet per roll (1 Meter), Black 60 psi Maxium Pressure
- No logo, hose Inside Diameter: 0.12″ (3mm), OD 0.27″ (7mm), Length: 3.3 Feet(1 Meter ) Per Roll
- Made of premium silicone material to ensure strength and durability
- It applies to general purpose air or water transportation in the engine bay
- Broad operation temperature : -76F to 374F (-60C to 190C). 60 PSI Maximum pressure rating
- Heavy wall design gives it the ability to handle extreme pressure
Made of High Temp Premium Grade Silicone. Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
UV and ozone resistant. Silicone hose is NOT compatible with fuel or oil
8. 1/4" ID x 25 Ft High Pressure Braided Clear PVC Vinyl Tubing Flexible Vinyl Tube, Heavy Duty Reinforced Vinyl Hose Tubing, BPA Free and Non Toxic
- Heavy Duty – Clear braided hose made of high pressure and high duty PVC with smooth interior and exterior that allows easy flow and flushing, light weight, BPA Free, non-toxic.
- Hose Detail – ID: 1/4″, OD: 7/16″, 25 ft, Wall thickness: 2.35mm
- Hardness: 73A (firm)
- Temperature Range : 23°F to 149°F (-5°C to 65°C)
- Working Pressure: 250PSI.
- Durable Use – The clear braided vinyl tubing walls are thick and flexible enough to prevent kinks, ideal for working in confined areas. High quality material makes it uv-resistant, chemicals resistant.
- Widely Applications – Flexible Hose applicable to industrial and agricultural, engineering, fish farming, and other fields. Ideal for oil, fuel, water, and air lines dispensing.
- Excellent Customer Service – Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied.
9. Bang4buck #304 Grade Stainless Steel Braid Fuel Line, 3′ X 3/8" Clamp-in Sleeving Kit , Cuttable, No Leaking (HSK1008-1526)
- Universal braided fuel line kit is 3/8 inch by 3 ft in length. 1Year 100% Quality Guarantee
- High pressure resistance, long lasting of use
- Max. Burst Pressure 400 PSI
- Max. Working Pressure 10 PSI
- Specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, powersteering fluids and nitrous oxide.
- Superior bonding eliminates hose fraying when cut
- Application:Universal Brake Lines, Clutch Lines, Fuel Systems, Turbo oil feed Hose, Coolant Systems, Oil Pressure Systems, Gauge lines & Power Steering
This universal fuel line will fit on any standard 3/8 inch hose barb in any fuel system. Sized at 3/8″ ID x 3ft, comes in handy just about anywhere fuel line is needed. It can be used anywhere on a car or truck fuel system. Universal in design and very flexible, this fuel line can be used anywhere! Works great as transfer line from your hard fuel line to fuel pump or from pump up to the fuel filter or carburetor. 3ft fuel line features a flexible rubber 3/8″ ID hose, covered with a steel braided jacket with bright anodized red & blue clamp covers on each end. This hose section of 36″ can be cut to any size needed & works on all gasoline applications, such as lawn mowers, tractors, go carts, snow blowers, motorcycles, cars & trucks.
Brackets Included: No
Hardware Included: No
Plug Wire Attachment Style: Clamp-in
Quantity: Sold as a kit
Wire Separator Finish: Chrome
Wire Separator Material: Plastic
Wires Per Separator: 2, 3, 4
Fits 7mm and 8mm spark plug wires; come with allen arench; keep the wires from heat
Hose Color: Natural
Hose Material: Braided steel
Hose Inside Diameter: 0.375 in
Hose Outside Diameter: 0.547 in
Hose Length: 3 feet
Note:Not suitable for fuel injection systems or E85 fuels
How to Cut:
For cutting your new steel braided hose to length you will need:
* cutting wheel/ hack saw/ or steel braided hose cutters
* duct tape or electrical tape (work best)
1. Measure your hose and find desired length.
2. Tape hose at measured length needed for application.
3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)
4. Remove the tape.
5. Slide one end of hose into end of fitting.
6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7. Make sure all connection are tight.
Package Included: 1 x Fuel hose
10. Nylon Braided Fuel Hose Kit, 10ft 1/2 Fuel Line with 6Pcs 8AN Hose End Adapter and 2Pcs 8AN Hose Separator Clamps, Great for Coolant Hose and Oil Hose Repair Projects
- RELIABLE and EXCELLENT SEALING PERFORMANCE – We recommend a professional installation, and the performance is still excellent after a long period of extreme environmental testing. ESPEEDER Swivel 8AN Hose Ends provide a secure fitting that seals hoses better than traditional push on nipples and hose clamps. They form a serviceable connection that provides a reliable seal
- DURABLE, FLEXIBLE and ABRASION RESISTANCE – Our braided 1/2 oil fuel hoses are an excellent alternative to conventional fuel lines, can be applied to higher-intensity temperature and pressure environments. He covers with 2 layers of nylon and stainless steel, and the inner CPE synthetic rubber offers excellent flexibility and resistance to ignition, many chemicals, heat aging, abrasion and weathering
- EASY to INSTALL and REUSABLE CONNECTORS – We highly recommend professional installation. But if you like DIY, that’s OK, ESPEEDER prepared the installation instructions for you. So you can easily get it done. Here is a warm reminder that the connectors are reusable, please use them again and again, this will help you save money. Order them now, and try them for your projects
- PROVIDE PROFESSIONAL and DIVERSE CHOICES – ESPEEDER is the professional supplier of auto parts, provide a variety of choices for fuel line and hose fittings. Also offer dozens of tubings, hundreds of fittings, and a full range of sizes, of course, you also have different options for colors. If the product on this page is not what you need, please contact us via Amazon Mail, and you will get more professional help
- RESPONSIBLE CUSTOMER SERVICE – ESPEEDER is the responsible brand, always provide high-quality products and best service, and hope our users can get good shopping experiences. In order to better serve you, we also offer a 24-hour non-stop mail service, so if you have any questions, please feel free to contact us, and you will get a responsible response
Material and Features:
The material of hose ends are an aluminum alloy, use the advanced anodizing process for color processing. And these AN Fittings use a 37 degree flared fitting to form a metal to metal seal. ESPEEDER recommend using braided CPE rubber tubing to match these fittings, it’s high quality braided fuel line with double layers of nylon and stainless steel. The aluminum hose separators are used to improve the tightness between multiple tubes, then your line will become more organized and neat
1 Pc 10FT Braided 1/2 Fuel Hose Line
2 Pcs Straight -8AN Hose Fitting Adapter
2 Pcs 45 Degrees -8AN Hose Fitting Adapter
2 Pcs 90 Degrees -8AN Hose Fitting Adapter
2 Pcs Black -8AN Hose Separator Clamps
Why choose the ESPEEDER fuel line repair kit?
A vehicle’s fuel hose transports fuel through its heart: the engine. Therefore, the faulty hose can greatly affect the vehicle’s performance, and even the condition of other parts such as the carburetor, fuel injector, and the engine itself. Conventional inferior tubing is more likely to cause this problem. ESPEEDER braided hose is a better alternative, he is more durable, flexible and abrasion resistance, has higher durability and better heat resistance, can better serve your engine
ESPEEDER braided hose can be used for fuel, oil, coolant, and hydraulic fluids. You will find that this braided hose and aluminum AN fitting are usually installed on high performance and race cars. After professional installation, this fuel line kit passed a long-term extreme environmental test, and the performance is still excellent. There is no leak problem here
As the professional supplier of auto parts, ESPEEDER always produces products and provides services from the perspective of users. Customer satisfaction is our ultimate pursuit. If you have any questions or any needs, please feel free to contact us, and will do our best to help you
By our suggestions above, we hope that you can found Vacuum Lines Braided for you.Please don’t forget to share your experience by comment in this post. Thank you!