768 reviews analysed
1. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
2. Simpson Structural Screws SD9112R500 No.9 by 1-1/2-Inch Structural-Connector Screw, 500-Pack
Feature
- 1/4-Inch Hex Head drive reduces cam-out for easier installation
- Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
- Optimized heat treated for strength
- Mechanically-galvanized coating meets ASTM B695 class 55
- Connectors installed with SD screw code listed under ICC-ES ESR-3096
3. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
4. 1/4 x 2-1/4" Tapcon Storm Guard Anchors White Ultrashield (50)
Description
Direct mount permanent anchors for quick and easy installations of metal and plywood panels to concrete and block. 3/16″ Hex Drive for installation (tool sold separately). Use with 3/16″ carbide-tipped drill bit. No caulking required.
5. CONFAST 1/4" x 6" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)
Description
Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 5/16″ is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 6″
Thread Length
The length of the threads on the anchor is 1-3/4″ in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 4-1/2″ to 5″. This will ensure that the minimum embedment of 1″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.
6. Simpson Strong-Tie SDWS22600DB-R50 6" x .220" Structural Wood Screw -Exterior 50ct
Feature
- Type T-40 Bit required with deep 6-lobe recess to prevent cam-out
- Low-profile heads allow hardware installation to be virtually flush
- Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification
- Bold thread design provides superior holding power and cInches fastened members together for consistent installation
- Tan double barrier double coating for exterior applications, Imported
Description
Product Description
Simpson SDWS Exterior Double Barrier Structural Wood Screws are designed with a shorter thread length to fasten multi-ply members such as trusses, engineered lumber products and solid-sawn lumber. Large washer head provides maximum bearing area and deep 6-lobe recess reduces cam-out. Requires type T-40 bit. Optimal screw lengths provide maximum penetration while preventing the point from protruding out the back member.
From the Manufacturer
Simpson SDWS Exterior Double Barrier Structural Wood Screws are designed with a shorter thread length to fasten multi-ply members such as trusses, engineered lumber products and solid-sawn lumber. Large washer head provides maximum bearing area and deep 6-lobe recess reduces cam-out. Requires type T-40 bit. Optimal screw lengths provide maximum penetration while preventing the point from protruding out the back member.
7. Simpson Strong-Tie 5005069 3.5 in. Washer Wood Screw44; Black 3-1/2"
Description
The Outdoor Accents Structural Screw Reduces Installation Time By Driving Easily Without Predrilling. When Combined With The Patent-Pending Load Rated Outdoor Accents Structural Washer, The Solution Delivers The Decorative Appearance Of A Bolt Connection But With A Much Easier Installation Than Through-Bolting. The Structural Screw And Washer Are Sold Separately From Each Other And The Outdoor Accents Connectors. Its Bold Thread Design Enables Superior Holding To Attach Ledgers And Other Connections. These Are Complete Line Of Heavy-Duty Shop Products That Will Bring You Years Of Reliable Performance.
8. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
9. CONFAST 1/4" x 6" Flat Phillips Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (Box of 100)
Description
Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A #3 is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 6″
Thread Length
The length of the threads on the anchor is 1-3/4″ in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 4-1/2″ to 5″. This will ensure that the minimum embedment of 1″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.
10. Simpson Strong-Tie SD10112R500 #10 x 1-1/2" Structural Screw 500ct
Feature
- 1/4-Inch Hex Head drive reduces cam-out for easier installation
- Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
- Optimized heat treated for strength
- Mechanically-galvanized coating meets ASTM B695 class 55
- Connectors installed with SD screw code listed under ICC-ES ESR-3096, Imported
Description
Product Description
Simpson Strong Tie SD Structural-Connector Screws are designed to be used with Simpson Connectors for both interior and exterior applications.
From the Manufacturer
Simpson Strong Tie SD Structural-Connector Screws are designed to be used with Simpson Connectors for both interior and exterior applications.
Conclusion
By our suggestions above, we hope that you can found Tapcon Hurricane Panel Screws for you.Please don’t forget to share your experience by comment in this post. Thank you!
