Top 10 Sump Pump 7 12 Hp

Product Description

1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.

See all Product description

Product Description

FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity

From the Manufacturer

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Product Description

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The eco-flo commitment is to produce pumps for the long term at the best value.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

Product Description

1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.

Amazon.com

The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.

Product Description

1/2 HP, Thermoplastic, Submersible Sump Pump, With Vertical Switch, Pumps Up To 3900 GPH at 0′,Vertical Float Switch For Automatic Operation, Designed For 11″ Diameter Or Larger Sump Basin, Top Suction Design Filters Debris & Minimizes Clogging, Designed For Easy Installation Without Any Plumbing Changes, Float Guard Protects Switch From Hang Ups, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Reinforced Thermoplastic Base. The product is manufactured in China. Easy installation and easy handling.

From the Manufacturer

The Wayne SPF50 submersible sump pump can move up to 3900 gallons per hour (gph). The top suction design filters debris and minimizes clogging. This pump comes with an epoxy-coated steel, high performance motor. This pump is designed for 11-Inch diameter and larger sump pits.

Intended for Indoor Use Only.

Water Ace products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The Water Ace commitment is to produce pumps for the long term at the best value.

Product Description

Zoeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller.

9ft. power cord. Truely a all star pump. Powder coated epoxy CI and SS fastners. Oil filled motor with thermal overload. CSA UL SSPMA

From the Manufacturer

When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.

Product Description

The Basement Watchdog ½ HP, Top Discharge Primary A/C Sump Pump with caged Dual Float Switch is ultra-compact and powerful.

From the Manufacturer

Not all sump pumps are created equal. The complete line of Basement Watchdog AC pumps is rated for continuous duty, which means they are built to run continuously 24 hours a day, 365 days a year. They-Fleeter strong and dependable, and when they are used intermittently in a sump application, it extends the life of the pump. We back this up by offering a 3-year warranty on all models when used in intermittent applications. 115V. 60Hz. 1/2 Horsepower.

Product Description

Liberty Pumps 257 is a 1/3HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 7″ and turn-off level is 3-1/2″. This pump can operate in a smaller 10″ diameter sump pit.The Liberty Pumps 257 has 1-1/2″ NPT discharge, 1/2″ solids-handling, 18′ shut-off head, a unique one-piece cast iron housing and thermally protected permanently lubricated motor.For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 251 and 253) are better suited for effluent applications and are easily adjustable for different On/Off levels.For added protection, consider the addition of a back-up pump such as Liberty’s SJ10 SumpJet, as well as an alarm such as Liberty’s ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.

From the Manufacturer

Rugged and dependable heavy-duty cast iron pump with powder coat finish. Liberty’s “workhorse” sump pump features a unique one-piece cast iron body, 10-Foot quick-disconnect power cord. With a durable, epoxy powder coat finish and vortex style impeller, Liberty’s 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering. This sump pump is for sump pits no less than 10-Inch in diameter.