Top 10 Ss Hurricane Anchors

0
740 reviews analysed

1. Furniture Straps, Wall Anchor, 10-pack Furniture Anchors for Baby Proofing Safety, Anti Tip Furniture Kit, Furniture Wall Straps, Bearing 132Ib, Nylon Straps

Furniture Straps, Wall Anchor, 10-pack Furniture Anchors for Baby Proofing Safety, Anti Tip Furniture Kit, Furniture Wall Straps, Bearing 132Ib, Nylon Straps

Feature

2. Red Head ITW 1/4 X 3-1/4" Hwh 410 ss Buildex Tapcon Stainless Steel Concrete Anchors

Red Head ITW 1/4 X 3-1/4" Hwh 410 ss Buildex Tapcon Stainless Steel Concrete Anchors

Feature

Description

Applications
The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 5/16″ is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4″.

Length Anchor
The length of the anchor is 3-1/4″

Thread Length
The length of the threads on the anchor is 1-3/4″ in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/4″. This will ensure that the minimum embedment of 1″ will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.

3. Orange Screw: The Ultimate Ground Anchor | Small 4 Pack | Made in The USA

Orange Screw: The Ultimate Ground Anchor | Small 4 Pack | Made in The USA

Feature

4. Red Head ITW 1/4 X 2-3/4" HWH 410 ss Buildex Tapcon Stainless Steel Concrete Anchors

Red Head ITW 1/4 X 2-3/4" HWH 410 ss Buildex Tapcon Stainless Steel Concrete Anchors

Feature

Description

Applications
The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.

Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A 5/16″ is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4″.

Length Anchor
The length of the anchor is 2-3/4″

Thread Length
The length of the threads on the anchor is 1-3/4″ in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4″. This will ensure that the minimum embedment of 1″ will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.

5. Malta Dynamics Warthog Comfort MAXX Construction Harness with Removable Belt, Side D-Rings and Additional Thick Padding (Small-Large), OSHA/ANSI/CSA Compliant

Malta Dynamics Warthog Comfort MAXX Construction Harness with Removable Belt, Side D-Rings and Additional Thick Padding (Small-Large), OSHA/ANSI/CSA Compliant

Feature

6. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack

The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack

Feature

Description

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

7. Guardian Fall Protection 11173 M-L Seraph Construction Harness with Side D-Rings

Guardian Fall Protection 11173 M-L Seraph Construction Harness with Side D-Rings

Feature

Description

Item Package Quantity:1 |  Size:M-L

Product Description

Specially designed with six points of adjustment and stretchable shoulder straps; the product includes: shoulder pads, cradle seat, quick adjust torso buckles, padded waist belt, D-ring lanyard keepers (which double as retrieval hoists), impact indicator, hammer loops and tongue buckle leg straps; the model’s size is built specifically for individuals whose height ranges from 5′ to 6’3″ and whose weight ranges from 140 to 250 lbs.

From the Manufacturer

The Guardian Fall Protection, “Seraph Construction Harness” is specially designed with six points of adjustment and stretchable shoulder straps. This product includes: shoulder pads, cradle seat, quick adjust torso buckles, padded waist belt, D-ring lanyard keepers (which double as retrieval hoists), impact indicator, hammer loops, and tongue buckle leg straps. M-L size is built specifically for individuals whose height ranges from 5-Foot to 6-Foot 3-Inch and whose weight ranges from 140 to 250 pounds. This version of the “Seraph Construction Harness” possesses side D-rings!

8. Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)

Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)

Feature

Description

Item Package Quantity:25 | Size:1/4 x 1-1/4

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

9. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)

CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)

Feature

Description

Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Head Style
The anchor is a head

Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Driver Required
A is required for driving the anchor into the base material.

Diameter of Anchor
The diameter of the anchor is 1/4″.

Length Anchor
The length of the anchor is 7/8″

Thread Length
The length of the threads on the anchor is in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.

10. Bull Ring Raised Fit Retractable Tie-Down Anchors (2 Pair) | ’98-14 Ford F150 and ’98-16 Ford Super Duty | ’99-13 Chevrolet Silverado and GMC Sierra | ’95-20 Dodge RAM

Bull Ring Raised Fit Retractable Tie-Down Anchors (2 Pair) | '98-14 Ford F150 and '98-16 Ford Super Duty | '99-13 Chevrolet Silverado and GMC Sierra | '95-20 Dodge RAM

Feature

Description

2 pair of New and Improved 4001 XT. Stainless Steel Chassis and Retractable Stainless eye means no rust and quiet smooth no rattle function. Installs in just seconds with no special tools or drilling on most domestic truck bed stake pocket holes. Ready to take on any load the truck can carry. New Stainless Chassis- means no rust- no corrosion, no worries. If you need to tie downs for a good solid truck- get these. They last a lifetime- and if you break-em- we’ll send you new ones- free.

Conclusion

By our suggestions above, we hope that you can found Ss Hurricane Anchors for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general