Top 9 Range Rover Projector Light

0

Nowadays, there are so many products of range rover projector light in the market and you are wondering to choose a best one.You have searched for range rover projector light in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings range rover projector light which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

623 reviews analysed

1. Car Door LED Logo HD Projector puddle Lights Welcome Light Ghost Shadow for Land Rover Range Rover LR2 LR3 LR4 for Land Rover Evoque Freelander Accessories (2 Pack)

Car Door LED Logo HD Projector puddle Lights Welcome Light Ghost Shadow for Land Rover Range Rover LR2 LR3 LR4 for Land Rover Evoque Freelander Accessories (2 Pack)

Feature

Description

Fit for Compatibility
Land Rover
Range Rover (2007 to 2020)
LR2 (2008 to 2019)
LR3 (2010 to 2019)
LR4 (2010 to 2019)
LAND ROVER Freelander 2 (2010–2019)
Range Rover Sport (2010-2020)

Installation Instructions:
Firstly, use a flathead screwdriver or installation tool to remove and disconnect original door step lights.
Secondly, plug in new door lights with correspondent connector.
Finally, put new door lights to the spot where your original step lights were.

2. Car Door Led Lights Projector Logo Shadow Ghost Light for Land Rover Range Rover 2007-2019 Compatible Welcome Lamp Accessories and 2pack

Car Door Led Lights Projector Logo Shadow Ghost Light for Land Rover Range Rover 2007-2019 Compatible Welcome Lamp Accessories and 2pack

Feature

Description

This listing is for pair of amazing door step courtesy laser projector Shadow lights for Land Range Rover Sport 2008 Discover

We highly recommend you double check whether this kind of lamps fit your car first before buying this product.

Features
Made with high quality cree chip

Power consumption: 3w

Material: ABS+Aluminum alloy

Built-in CAN-bus controller, complete no onboard computer error

Just taked out the your old light and insert this product without change wires or drill hole.

Low power consumption.

Fitment
This auction features one pair Error Free door step courtesy laser projector Shadow lights for Land Rover listed below: (*This LED Light only can use for Land Rover-CAR, 4 Doors needs two sets.*)

Range Rover III

Discovery III and IV

LR3

LR4

If you car haven’t light,please don’t purchase,it can’t install.

If you still are not sure whether an item fits your car or not, please feel free to ask us by sending us a message. It’s our pleasure to answer your question.

Package included: 2 pcs Logo Shadow Lights = 1pair.
Installation
Note: Installation manual not included. Requires professional installation to ensure proper function.

All of our products are designed for easy DIY installation & direct replacement. If LED bulb doesn’t light up after installation, please simply re-insert it oppositely (because LED bulb has polarity like a battery).

Specification:

1) Voltage: DC12V

2) Power: 5W/pcs

3) Material: Aluminum Alloy & Plastic

4) Color Temperature: 7000K

5) Working Temperature: -40 to +150 Centigrade

6) Net Weight: 38g/Pcs

3. Car Door LED Logo HD Projector Lights Welcome Light for Land Rover Accessories Range Rover LR2 LR3 LR4 Land Rover Evoque Freelander 2-pc set

Car Door LED Logo HD Projector Lights Welcome Light for Land Rover Accessories Range Rover LR2 LR3 LR4 Land Rover Evoque Freelander 2-pc set

Feature

Description

Fit for

Compatibility
Land Rover
Range Rover (2007 to 2015)
LR2 (2008 to 2013)
LR3 (2010 to 2014)
LR4 (2010 to 2014)
Land Rover Evoque 2013Top Rank
LAND ROVER Freelander 2 (2010–2014)

Package Includes:

2* Logo Door Lights.

Features:
Material: PP
Power: 5W
Working Voltage: 12V
Operating Temperature:-40°C ~ 70°C
Quantity: 2 pcs

Installation Instructions:

Firstly, use a flathead screwdriver or installation tool to remove and disconnect original door step lights.
Secondly, plug in new door lights with correspondent connector.
Finally, put new door lights to the spot where your original step lights were.

4. Interior Car Lights, Govee Car LED Strip Light Upgrade Two-Line Design Waterproof 4pcs 48 LED APP Controller Lighting Kits, Multi DIY Color Music Under Dash Car Lighting with Car Charger, DC 12V

Interior Car Lights, Govee Car LED Strip Light Upgrade Two-Line Design Waterproof 4pcs 48 LED APP Controller Lighting Kits, Multi DIY Color Music Under Dash Car Lighting with Car Charger, DC 12V

Feature

5. BlissLights Sky Lite Blue – Laser Projector w/LED Nebula Cloud for Game Rooms, Home Theatre, or Night Light Ambiance – Cobalt (Blue/Blue)

BlissLights Sky Lite Blue - Laser Projector w/LED Nebula Cloud for Game Rooms, Home Theatre, or Night Light Ambiance - Cobalt (Blue/Blue)

Feature

6. For Land Rover Car Door LED Logo Lights, 3D Ghost Shadow Light Wireless Welcome Courtesy Projector Light Fit for Land Rover Range Rover 2010-2020 Land Rover Evoque Freelander 2(4PCS)

For Land Rover Car Door LED Logo Lights, 3D Ghost Shadow Light Wireless Welcome Courtesy Projector Light Fit for Land Rover Range Rover 2010-2020 Land Rover Evoque Freelander 2(4PCS)

Feature

Description

Color:For Land Rover

Express your passion for Land Rover with our Land Rover Wireless LED Laser Car Door Logo Lights to Turbo-charge your car doors with Brilliant Light-emitting properties and dynamic contrast.

Be Bold Anywhere. Be Captivating Anytime.

Features
100% brand new
Voltage: 12V
Output power: 10W
Material: ABS + Aluminum alloy
Quantity: 4 Lamps (2 Pair)
Features: Installed Simply, Good Looking and Utility
High Brightness LED, Power Consumptions Savage

Note: Please confirm your car model and year before purchasing. 

COMPATIBLE FOR:
For Land Rover Range Rover (2010 – 2020)
For Land Rover Evoque 2013 Top Rank
For Land Rover Freelander 2(2010–2020)
For Land Rover Discovery 3&4(2010-2020)
For Land Rover Range Rover Executive Edition(2007-2020)

How to replace car door light (Installation Instructions):
1. Use a Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug In new Door Lights with Correspondent Connector;
3. Put new Door Lights to the Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.

Notes:
If you cannot confirm whether these lights are compatible with your car model or some installation problems, you can contact us at first!
Helpful and Supportable Customer Service for You All The Time.

7. Car Door Lights for Land Rover Range Rover 2010-2015 Shadow Ghost Puddle Light 4 Pack Car Door Lighting Entry Ghost Shadow Projector Laser Emblem Welcome Lamp for Land Rover Accessories

Car Door Lights for Land Rover Range Rover 2010-2015 Shadow Ghost Puddle Light 4 Pack Car Door Lighting Entry Ghost Shadow Projector Laser Emblem Welcome Lamp for Land Rover Accessories

Feature

Description

Color:for Land Rover

Product Advantages:

Aluminum back cover,Better heat dissipation,Long life-span.

Aluminum back cover,Stronger,More Durable.

Our back cover is aluminium alloy, Most is plastic with poor quality in the market.

Specification:
Input Power: 5w (each LED bulb) Voltage:DC 12/24v
Working Temperature:-40℃-105℃
Lower Power Consumption
How to replace car door light(Installation Instructions):

Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;

Plug in New Door Lights with Correspondent Connector;

Put new Door Lights to The Spot Where Your Original Lights Were;

Done! Logo Should Be Projected on The Ground.

8. 2pack Car Door Led Lights Projector Logo Shadow Ghost Light for Land Rover Range Rover 2007-2019 Compatible Welcome Lamp

2pack Car Door Led Lights Projector Logo Shadow Ghost Light for Land Rover Range Rover 2007-2019 Compatible Welcome Lamp

Feature

Description

Color:Range rover light
1.Easy to install–Direct Replacement.No modifications required.No wire cutting.
2.Package Included: 2 x Land Rover Logo Lights (Not applicable if the car does not have original door lights.)
3.Clear bright laser LED car lights with welcome logo emblem projection for Land Rover- Fashion light & shade visual experience for You!

How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.
Notes: If you cannot confirm whether these lights are compatible with your car model or some installation problems, you can contact us at first!

9. 2pcs LED Symbol Welcome Light Door Logo Projector Lamp for Land Rover, Ground Ghost Shadow Lights Door Warning Light for Range Rover Discovery 4 Evoque Freelander Plug and Play 5W

2pcs LED Symbol Welcome Light Door Logo Projector Lamp for Land Rover, Ground Ghost Shadow Lights Door Warning Light for Range Rover Discovery 4 Evoque Freelander Plug and Play 5W

Feature

Description

Color:for land rover 2pcs

For the real projection, please refer to the sixth image.
This welcome lights is installed into the under surface of the car doors. When the door is opened, the logo light is powered on and will be projecting onto the ground. When you close the door, the logo light disappears.

The lights can be compatible with LandRover car only:
Range Rover (2007 to 2016)
LR2 (2008 to 2016)
LR3 (2010 to 2016)
LR4 (2010 to 2016)
Land Rover Evoque 2013 Top Rank
LAND ROVER Freelander 2 (2010–2016)
Attention please:
1. For above car models, before making order, please check whether your original car door light can be powered or not? If there is no power supply for your original door light, this items can’t fit your car. Because even for the same model, some general configuration hasn’t power supply for the door lights, only its deluxe configuration has power supply for the door lights.
2. For some cars, because of the position of the door lights, the light projection is hitting the door when it is opened, and therefore, only a part of projecting appears on the ground. If you mind it, please don’t buy. Thanks for your understand.

Specification:
Current: 0.15MA
Input Power: 5W
Color Temp: 6500K
Voltage: DC 12/24V
Material: PVC
Chip: CREE

How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.

Package include:
Door light*2

Conclusion

By our suggestions above, we hope that you can found Range Rover Projector Light for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general