Top 10 Range Pole

Direct Replacement To The A419Abc-1C The A421 Series Electronic Temperature Controls Are Single-Stage Controls With A Single-Pole, Double-Throw (Spdt) Output Relay. A421 Controls Feature A Bright Backlit Lcd With Adjustable Brightness And A Three-Button Touchpad Interface That Can Be Set Up To Restrict User Adjustments. An Led Indicates The Output Relay’s On/Off Status. Standard A421 Series Control Modules Have Simple On And Off Temperature Settings For Heating Or Cooling, An Adjustable Anti-Short Cycle Delay, Temperature Setback, And Sensor Offset Capability. Made in United States. Manufactured by Johnson Controls.

The EZ-Bridge LT5HD+ is a high power 25dBm (316mW) outdoor wireless bridge system operating in the 5GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11an standards to insure interoperability. The EZ-Bridge LT5HD+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports VOIP, VPN, multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge LT5HD+ units can be connected in a mesh configuration to allow interconnecting more than two sites. With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security. Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power inserters. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer. The EZ-Bridge LT5HD+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 16dBi 802.11an MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected Cat5e rated POE (Power Over Ethernet) power inserters and 75′ outoor rated shielded CAT5 cables. Customer needs to supply CAT5 cabling between the power inserter and his computer, router or switch.

Outdoor TV Antenna with TOP Design Compact Outdoor Antenna provides local television in full 1080 HD quality, for free. Its pre-assembled design mounting hardware provide a variety of placement options. Don’t settle for a lesser picture or fewer channels when you know your TV is capable of delivering much more! Supports up to 1080i HDTV broadcasts Receives UHF and VHF channels = more content! Pre-assembled design with easy-lock fold-out VHF reflector and snap-lock elements Frequency Range: VHF: 170-230MHz / UHF: 470-860MHz Typical Antenna Gain: VHF 28~32dB | UHF 32~36dB Antennas are built-in preamplifier* for outdoor usage. Antennas are built-in preamplifier* for outdoor usage. (per Wikipedia). Locate the amplifier as close to the antenna as possible, so amplifying antenna signal and not amplifying line noise or interference on the cable run. * Antenna Pole Includes Need an antenna that comes with all mounting accessories? Don’t worry about searching for a suitable mounting pole, because one is already included in the box.