Nowadays, there are so many products of ninja replacement parts qb3005 in the market and you are wondering to choose a best one.You have searched for ninja replacement parts qb3005 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja replacement parts qb3005 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
534 reviews analysed
1. Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013
Feature
- 【Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Includ 】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
2. Genuine Ninja BL770 replacement parts (Single blade)
3. Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender
Feature
- BEFORE PURCHASING – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS. 3) 3.35″ (8.5cm) Diameter. 6 fins blade only fits for Ninja BL770, BL771, BL773CO ,BL780, BL660, BL740
- EASY TO USE – Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.
- EASY TO CLEAN – The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, dishwasher safe, easy to clean.
- PACKAGE INCLUDE – 1* Single Serve Blade, 2 * 16-Oz Single Serve Cups with Lid
- MONEY-BACK GUARANTEE – It’s non-original aftermarket part. for any reason you’re not completely satisfied,can ask for a replacement or full refund.
4. Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)
Feature
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
- Packing include: 1×7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Important Tips-Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Desiged for:Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 etc,
Description
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
5. 3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)
Description
This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender
6. Two Pack 16-Ounce (16 oz.) Cup with Sip & Seal Lid Fit for Nutri Ninja blender eries with BL660/BL663/BL663CO/BL665Q/BL771/BL773CO/BL780/BL780CO/BL810/BL820/BL830/QB3000/QB3000SSW/QB3004/QB3005
Feature
- Two Pack 16 oz.Cup with Sip & Seal Lid
- This cup set for Ninja Fit QB3000SS/QB3000SSW and nutri ninja QB3000/QB3004/QB3005
- This set also can fit Ninja Professional Blender BL660/BL663/BL663CO/BL665Q
- This cup for Ninja 16oz cup with lid
- This cup for Ninja Mega Kitchen System BL770/BL771/BL773CO and Ninja Ultima Kitchen System with BL810/BL820/BL830
Description
This set is wondful and amazoning product with BPA free. This cup set can fit all nutir ninja blender series below: Ninja Fit QB3000SS/QB3000SSW and nutri ninja QB3000/QB3004/QB3005 Ninja Professional Blender BL660/BL663/BL663CO/BL665Q Ninja Mega Kitchen System BL770/BL771/BL773CO and Ninja Ultima Kitchen System with BL810/BL820/BL830 This is a general-purpose accessory.
7. Blendin 2 Pack 32 Ounce Cup with Sip N Seal Lids,Fits Nutri Ninja Auto-iQ 1000W and Duo Blenders
Feature
- Fits Nutri Ninja Kitchen Systems Auto IQ and Duo Blenders
- These have 4″ diameter. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups.
- Models it fits are BL480 BL481 BL482 BL490 BL640 BL680 BL450 BL482 BL682 BL642 BL640
- Includes Two 32 oz. Cups and Two Sip N Seal Lids
- Compatible with the BL450 Series, BL480 Series, BL640 Series, CT640 Series, and CT680 Series.
Description
These have 4″ diameter. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups. Includes Two 32 oz. Cups and Two Sip N Seal Lids. Fits Nutri Ninja Kitchen Systems Auto IQ and Duo Blenders. Compatible with the BL450 Series, BL480 Series, BL640 Series, CT640 Series, and CT680 Series such as BL480 BL481 BL482 BL490 BL640 BL680 BL450 BL482 BL682 BL642 BL640. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups. Includes Two 32 oz. Cups and Two Sip N Seal Lids
8. Blender Blade Assembly 6-Fin Extractor Blade Replacement Parts for Ninja BL660 BL663 BL663CO BL665Q BL740 fits 16 oz Blender Cup
Feature
- ✅[Ideal Replacement]: Want Blender Blade Assembly Replacement that matches the original, for far less than going back to the dealership? This Blender Blade was specifically designed to look and function the same as the original. While this is NOT a original part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅[Package included]: 1 x Blender Blade Assembly.
- ✅[Direct Fit]: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
- ✅[Appliance Model]: Fit for Ninja blender BL660 BL663 BL663CO BL665Q BL740 (16oz Cup).
- ✅[Buy with Confidence]: We offer 3 MONTHS WARRANTY, true worry-free shopping experience. If the Blade ever fails on your Blender simply contact us.
Description
Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x Blender Blade Assembly. (fits 16 oz Blender Cup)
Fits The Following Ninja Blender :
Ninja Blender BL660
Ninja Blender BL663
Ninja Blender BL663CO
Ninja Blender BL665Q
Ninja Blender BL740
If you have any problem about your order,please feel free to contact us.
9. 2 Piece Sip Seal Lids Replacement Parts for Nutri Ninja 16oz Cup
Feature
- Sip Seal Lids Replacement Parts for Nutri Ninja 16oz cup,can fit ：ninja BL100/BL101/BL102
- Compatible models Ninja BL660-30 BL770-30 BL771-30 BL772-30 BL773co-30 BL780-30 BL810 BL820 BL830
- Compatible models Ninja BL203QBK/BL208QBK/BL207QBK/BL206QBK/BL209/BL201C/BL201
- Compatible models Ninja QB3000/QB3000SSW/QB3004/QB3005
- Diameter: Aprox 8.5cm/Color is Black
Description
All the parts are made to exact OEM specification and are made to fit the part # they replace these model number blenders: BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830,BL203QBK/BL208QBK/BL207QBK/BL206QBK/BL209/BL201C/BL201/QB3000/QB3000SSW/QB3004/QB3005 can fit ：ninja BL100/BL101/BL102
10. 1 Piece Sip Seal Lids Replacement Parts for Nutri Ninja 16oz Cup/Nutri Ninja blender series with BL200/BL201/BL660/BL663/BL663CO/BL665Q/BL771/BL773CO/BL810/BL820/BL830/QB3000/QB3000SSW/QB3004/QB3005
Feature
- Sip Seal Lids Replacement Parts for Nutri Ninja 16oz cup
- Compatible models Ninja BL660-30 BL770-30 BL771-30 BL772-30 BL773co-30 BL780-30 BL810 BL820 BL830
- Compatible models Ninja BL203QBK/BL208QBK/BL207QBK/BL206QBK/BL209/BL201C/BL201
- Compatible models Ninja QB3000/QB3000SSW/QB3004/QB3005
- FIT：ninja BL100/BL101/BL102
Description
This lid can fit FIT these model number blenders: BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830,BL203QBK/BL208QBK/BL207QBK/BL206QBK/BL209/BL201C/BL201/QB3000/QB3000SSW/QB3004/QB3005
Conclusion
By our suggestions above, we hope that you can found Ninja Replacement Parts Qb3005 for you.Please don’t forget to share your experience by comment in this post. Thank you!
