Top 10 Ninja Kawasaki 300 Lowering Linkage

Unpainted Injection Fairing Kit Fit for: Kawasaki NINJA 300 EX300 EX300A EX300B 2013-2017

Fairing introduction:
????Use the high level mold, same as the original one with the perfect fitment, hole pre-drilled, 99% Fitment Guaranteed
????Our fairing kit all made by new ABS plastic material, will more strong than other, durable and flexible
????We are the fairing kit factory so compare to other seller, our motorcycle fairing kit will more cheap price but more high quality,high cost performance.
????With our independent warehouse in CA, 3-6 days fast delivery time to your hand
????Because we are factory so we can promise you all fairing kit with high test level, also we will provide you the professional after sale service, Don’t hesitate to buy it
????All the pictures were taken from our fairing kit, you will received the fairing kit just same as the picture shown.
????We specialize in this motorcycle fairing kit market over 10 years, All the fairing kit mold we have more than 1000 Pcs, We think we are the more professional and with long history seller, you will not regret to choose us.

Full 17 piece fairing kit includes:
– Upper Nose Fairing
– Left & Right Side Fairings
– Tail Fairing
– Front Tire Hugger
– Black Accent Parts

TIP:
1.If item got damaged during shipping (seldom happen), we’ll provide replacement for free upon photo confirmation.
2. This is an aftermarket custom item, not an OEM part. It will fit the models listed but modification may or may not be required. This item is intended for professional installation. Make sure it will fit before you buy.Thank you for our understanding.

Fits:
EX300ADF – 2013 NINJA 300
EX300ADFA – 2013 NINJA 300 SE
EX300ADFAL – 2013 NINJA 300 SE
EX300ADFL – 2013 NINJA 300
EX300AES – 2014 NINJA 300
EX300AESA – 2014 NINJA 300 SE
EX300AESAL – 2014 NINJA 300 SE
EX300AESL – 2014 NINJA 300
EX300AFF – 2015 NINJA 300
EX300AFFA – 2015 NINJA 300 SE
EX300BDF – 2013 NINJA 300 ABS
EX300BDFA – 2013 NINJA 300 ABS SE
EX300BDFAL – 2013 NINJA 300 ABS SE
EX300BDFL – 2013 NINJA 300 ABS
EX300BEF – 2014 NINJA 300 ABS
EX300BEFA – 2014 NINJA 300 ABS SE
EX300AHF – 2017 NINJA 300
EX300AHFL – 2017 NINJA 300
EX300AFS – 2015 NINJA 300
EX300AFSA – 2015 NINJA 300 SE
EX300AFSAL – 2015 NINJA 300 SE
EX300AFSL – 2015 NINJA 300
EX300AFFAL – 2015 NINJA 300 SE
EX300AFFL – 2015 NINJA 300
EX300AGF – 2016 NINJA 300
EX300AGFL – 2016 NINJA 300
EX300BGF – 2016 NINJA 300 ABS
EX300BGFL – 2016 NINJA 300 ABS
EX300BEFAL – 2014 NINJA 300 ABS SE
EX300BEFL – 2014 NINJA 300 ABS
EX300BES – 2014 NINJA 300 ABS
EX300BESA – 2014 NINJA 300 ABS SE
EX300BESAL – 2014 NINJA 300 ABS SE
EX300BESL – 2014 NINJA 300 ABS
EX300BHFBL – 2017 NINJA 300 ABS WINTER TEST EDITION
EX300BHFL – 2017 NINJA 300 ABS
EX300BHF – 2017 NINJA 300 ABS
EX300BFS – 2015 NINJA 300 ABS
EX300BFSAL – 2015 NINJA 300 ABS SE
EX300BFSL – 2015 NINJA 300 ABS
EX300BFF – 2015 NINJA 300 ABS
EX300BFFA – 2015 NINJA 300 ABS SE
EX300BFFAL – 2015 NINJA 300 ABS SE
EX300BFFL – 2015 NINJA 300 ABS
EX300BGFA – 2016 NINJA 300 ABS KRT EDITION
EX300BGFAL – 2016 NINJA 300 ABS KRT EDITION
EX300BHFA – 2017 NINJA 300 ABS KRT EDITION
EX300BHFAL – 2017 NINJA 300 ABS KRT EDITION

Features

Fairing Kit fits: Kawasaki Ninja 300 EX300 EX300A EX300B 2013-2017 2014 2015 2016
98% Fitment Guaranteed
ABS Injection Molded,use same grade OEM bodywork fairing kit ABS raw material
Pre-Drilled Mounting Holes, Ready For Installation
MANUFACTURED PROCESS – Best Fitment in the Industry – Guaranteed
Each body fairing piece is “Injection Molded” (not cheap thermal mould or fiberglass mould).
Each body fairing piece uses same grade ABS raw material as OEMs.
Same manufacturing process as the pricey factory fairings.

Package Include:

All painted fairings and any small trim pieces that are shown in the above photo are included.
Fairing bolts are not included.
These use the same bolts as the stock fairings to mount.

Fairing Kit fits: Kawasaki NINJA 300 EX300 EX300A EX300B 2013-2017 2014 2015 2016

Description 

• Light Color: Red / Blue/  Green 
• 1-6 Gear display 
• ABS version does not require the use of connector; 
• Only four of the products connected to the line, you can also use normally 

Notice: 

• Ecu plug in direct mount, no need to make refit, only need to set it with speed change for the gear indicator to progamming the right gear number. 
• The wire pins is not plug to the ecu socket adapter when you received, this will be more convinient for you to wring and fix the wire.
• After pins plug into the ecu socket adapter and then plug in your bike’s ecu port, then it will be ok.  

Instructions Guide:

• After you receive the gear indicator, pls connect the cable at right port according our poduct page and plug into your motorcycle’s ecu plug, then open your motorcycle’s power(not ignition) and then it will younts from 6-1 and then “L” blinks, L means learning, when “L” blinks, no more wait, ignition your motorcycle, and then run at different speed to set the gear indicator?
• Show right gear level, after seting finished, then it will work with your bike, if it doesn’t work properly, you only need to reset (6 times power open and cut off);
• All Honda motorcycle need to make this set, Kawasaki and Suzuki do not need this process. Cause after setting, all gear indicator will work properly, pls do not open;

   1 x Gear Indicat

Package Include:

• For Kawasaki NINJA 250 R FI MODEL 2008-2015
  For Kawasaki NINJA 300   2013-2018
  For Kawasaki NINJA 400 R   2010-2016

Quickly shift between 2-wheel and 4-wheel drive with our transfer case shift linkage. The T-case shift link is an ideal replacement item if you own a 4-wheel drive vehicle that requires the ability to shift easily between gears. Dorman Transfer Case Shift Linkage comes as a complete kit, including all the necessary components for a complete installation.

REGULAR JIG IS BACK IN STOCK! We made the first and still make the finest 300 Blackout case cutting jig. Designed and made by serious reloaders who value high quality consistent tools. This jig features and auto lock to snap the case in place and then after cutting an auto ejection feature to keep your fingers away from the saw blade and produce the fastest, most repeatable case cutting of any miter saw jig made. Period. These jigs feature (HARD COAT) MIL-A-8625 Type III Class 2 anodizing applied by a specialized facility. This hard ceramic like coating will allow these jigs to cut over 100,000 cases! Competitors jigs sold just use a home brew type colored anodizing process which is thin, inconsistent and cosmetic. We use stainless steel detent pieces and parkerized bolts to bolt this jig down ROCK SOLID to the saw base, we simply don’t trust the cheap Chinese saw clamp to hold a precision reloading jig in place. Frequently our customers advise us they have tried other jigs to save a few dollars only to have to buy twice. Check out Short Barrel Shepards video of our early jig here. https://www.youtube.com/watch?v=6q-N4nai6_4 Short Barrel was not compensated in anyway. The current jig is slightly different than the video, we added a longer feed slot to aid people with big hands or arthritis. This jig works on any of the 2″ mini miter saws (harbor freight etc) DONT BUY THE HYPE! all of these 2″ mini miter saws are the same, just different colors and stickers. You will receive the jig, mounting hardware, instructions and LIFETIME support. www.zepreloading.com zepreloading @yahoo.com Youtube video of installation https://youtu.be/dj53woK497k Youtube video of shop vac set up and jig operation https://www.youtube.com/watch?v=dj53woK497k

Jeep Wrangler TJ/LJ 1997-2006 Cable Shifter Assembly to replace the mechanical linkage of your transfer case. This design is easy to install and easily adjusts to the tub. Get rid of the messy mechanical linkage. Use your existing t-case shifter. May come with rod ends different than the ones depicted. Lifetime Warranty! FREE SHIPPING TO US48!

Lokar Adjustable Column Arm kit simplifies connecting your column shift to your transmission with a Lokar billet aluminum adjustable column shift linkage kit. It works with all GM style factory or aftermarket columns. The rigid, clean line design allows the proper ratio adjustment between the transmission and the indicator on the column.