Finding your suitable readers for miller welding tig water cooling power cable is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for miller welding tig water cooling power cable including detail information and customer reviews. Let’s find out which is your favorite one.
629 reviews analysed
1. MANATEE Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH – 0 to 4000 psi pressure gauge CGA580 inlet Connection Gas Welder Welding Regulator More Accurate Gas Metering Delivery System
- ✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator!
- ✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder. For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc.
- ✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering.
- ✔ HAS CGA – 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 – 60 CFH and has large 1 1/2″ diameter pressure gauge which reads from 0 – 4000 PSI, so you know how much is left in your tank.
- ✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings. Order Now!
2. WeldCraft 366-WP-20-25 WP-20-25 WP-20 Water Cooled TIG Torch Kit, Angled Head, 3/4" Handle, 25′ Vinyl Cable
3. RIVERWELD TIG Welding Cable Panel Connector-Plug DKJ35-50 315Amp Dinse Quick Fitting
It Can apply to the same series sockets and connectors;
Model No: DKJ35-50;
Rated Current: 315amp;
Wire Section: 35-50mm2;
4. WELDFLAME 14 Pin Male Plug 136961 141162 for Miller Hobart Thermal Arc TIG MIG Welding
- This 14 pin, metal, cord mounted male plug is equivalent to Miller’s p/n 136961 if you purchased a metal plug, or Miller’s p/n 141162 if you purchased a plastic plug.
- This 14 pin connection is found on many Miller welders and is used for many different functions – remote amperage control and remote wire feeders are 2 of them.
This 14 pin, metal, cord mounted male plug is equivalent to Miller’s p/n 136961 if you purchased a metal plug, or Miller’s p/n 141162 if you purchased a plastic plug. This 14 pin connection is found on many Miller welders and is used for many different functions – remote amperage control and remote wire feeders are 2 of them.
5. PRIMEWELD TIG225X 225 Amp IGBT AC DC Tig/Stick Welder with Pulse CK17 Flex Torch and Cable 3 Year Warranty
- 225AMPS TIG/STICK WELDER WITH PULSE FUNCTION WORKS GREAT WITH ALUMINUM, STAINLESS STEEL AND THINNER METALS
- CK Worldwide 17 Series Superflex TIG Torch with Flex Head AND CK SUPERFLEX HOSE, ALSO INCLUDES CK DINSE CONNECTOR USA MADE
- 200HRTZ on PULSE FREQ AND AC FREQ will do 1/4″ aluminum and 3/8″ mild steel and 110/220 volts and is capable of welding 7018, 6013
- Both HF start hand torch control and precise foot pedal welding heat control
- Advanced Inverter Technology with PWM (Pulse Width Modulation) Using IGBT technology
Backed by our Famous 3-year warranty and 7 days per week customer support, all based in the USA. This Primeweld Tig225x has been carefully made and adjusted to fit today’s modern welder. This unit features 225 amps of AC/DC Tig welding with stick function allowing both the professional and hobby welder a wide range of uses. Power width modulation along with IGBT technology design gives this machine the most reliability. High performance on both 110v and on 220v with a full range of pulse features and cleaning control for AC These options allow the best versatility in a welder in this price range that is available on the market today. This unit comes with a CK17 flex head torch along with CK flex tubing and CK Dinse connector, the complete torch set up is made in the USA. High quality metal foot pedal control is also supplied for ease of use. SPECS: Start AMP 10-225 with Pulse End AMP 10-225 Pulse Frequency .10-225/ 0.5-10 hz Pulse Time On 10-90% Post Flow 1-10 Ac Balance 30-70% 2T/4T, Pre-flow 0.1-1s, Up Slope 0-10s, Down Slope 0-25s, AC Frequency 40-200hz, Certification: CE, CCC, CSA and ISO-9001 certification
6. 105z57 Power Cable Adapter For Air-cooled Tig Welding Torch WP 9 17 Series In CK Weldcraft
Package Including: 1pc 105z57 Power Cable Adapter
TIG torch power adapter for series 9 and 17 air-cooled TIG torches. Adapts TIG torch to welding machines using standard 1/2″ threaded output stud.
7. Miller 234609 M-10/15 M-100/150 MIG Consumable Kit, .035 Wire
8. TIG Gas Lens Collet Body Consumables Kit Fit QQ300 PTA DB SR WP 17 18 26 TIG Welding Torch 51pcs
- This Gas lens & Collet kits fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17,DB18 and DB 26 torches, along with the Weld craft WP-17, WP-18 and WP-26 torches
- 20pcs TIG Alumina Nozzle Ceramic Cup
- 10pcs TIG Collets & 10pcs TIG Collet Bodies
- 8pcs TIG Gas Lens Collet Bodies
- 3pcs TIG back cap and 2pcs Cup Gasket
Package Included :
TIG Back Cap 3pcs
1pcs 57Y02 Long Back Caps
1pcs 57Y03 Medium Tig Back Caps
1pcs 57Y04 Short Back Caps
1pcs 10N22 0.040″ & 1.0mm
3pcs 10N23 1/16″ & 1.6mm
3pcs 10N24 3/32″ & 2.4mm
3pcs 10N25 1/8″ x & 3.2mm
TIG Collet Body
1pcs 10N30 0.040″ & 1.0mm
3pcs 10N31 1/16″ & 1.6mm
3pcs 10N32 3/32″ & 2.4mm
3pcs 10N28 1/8″ & 3.2mm
Alumina Ceramic Cup
1pcs 10N50 size 4, & D6.5 x 47mm
2pcs 10N49 size 5, & D8.0 x 47mm
3pcs 10N48 size 6, &D9.5 x 47mm
3pcs 10N47 size 7, &D11.0 x 47mm
1pcs 10N46 size 8, &D12.5 x 47mm
Collet Body MEDIUM Gas Lens
2pcs 45V24 0.040″ & 1.0mm
2pcs 45V25 1/16″ & 1.6mm
2pcs 45V26 3/32 ” & 2.4mm
2pcs 45V27 1/8″ & 3.2mm
Alumina GAS Lens Nozzles
2pcs 54N17 5#
2pcs 54N16 6#
2pcs 54N15 7#
2pcs 54N14 8#
1 pcs Cup Gasket 18-CG
1pcs Gas Lens Cup Gasket 54N01
9. HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH – 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator
- ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580.
- ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder.
- ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc.
- ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 – 50 CFH and has large 1 1/2″ diameter pressure gauge which reads from 0 – 4000 PSI, so you know how much is left in your tank.
- ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc.
Perfect for all TIG and MIG Welding application
More precise gas metering
The output flow is adjustable from 10 to 50 cfh (cubic feet per hour)
Pressure gauge : 0 – 4000 PSI
Fits CGA – 580 Tank Fitting so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks.
Connection: female UNF9/16 with 1/4″ barbed fitting
CGA Connection Inlet 58
CGA Connection Outlet 5/8 In. -18 RH(F)
Delivery Pressure Range 25 psig
Gauges Delivery Pressure 25 psig
Delivery 0 to 50 Argon/38 cfh, CO2
Inlet Gauge 0 to 4000 psi
Gauge Size 1-1/2 In.
Overall Length 7-7/64 In.
Flow Rate Up to 50 CFH Argon and 38 CFH CO2
1 x Flowmeter
6.5 foot Hose
By our suggestions above, we hope that you can found Miller Welding Tig Water Cooling Power Cable for you.Please don’t forget to share your experience by comment in this post. Thank you!