Top 10 Long Range 4G Yagi

The Ultra Wide Band Cellular booster antenna grid is the highest continuous gain cell phone signal booster antenna in the market. Our patented one of a kind design allows for very high gain and directionality on all frequencies between 600MHz and 6500MHz. This ultra wide band cellular antenna works on a multitude of bands including: Cellular, LTE, 5G, GSM, ISM, CDMA, UMTS, 2G/3G/4G/ WiFi, Homeland Security, Wi-Max, GPS, Homeland Security, Military, Satellite, Aerospace exploration, Radio Telescope +more. Continuous gain + radiation, also known as instantaneous gain, means the cell booster antenna is always radiating at the intended frequency range it was designed for. Great for installers since it will automatically work out of the box on any device within the 600-6500 Mhz spectrum. We designed a feature into this cellular antenna that allows for optImizing the lower + upper portions of the ultra wide bandwidth. No adjusting or calibration required. All the gain you can handle. Technical Specs: ???? Frequency Range (MHz): 600 – 6500 ???? Polarization: Vertical or Horizontal Gain ???? (dBi): 15 Low / 20 Mid / 25 High ???? Half-power Beam Width (°): Low ???? Band: 20 Horiz, 23 Vert ???? Half-power Beam Width (°): Mid ???? Band: 12 Horiz, 15 Vert ???? Half-power Beam Width (°): High ???? Band: 7 Horiz, 9 Vert ???? HFront-to-back Ratio ???? (dB): 20 AVG ???? Impedance (Ω): 50 VSWR: 1.6:1 / 1.4:1 AVG Max ???? Input Power (W): 100 ???? Lighting Protection: DC Ground ???? Connector: N- Female ???? Dimensions (in / mm): 24x39x16 / 60x99x40 ???? Rated Wind Velocity (mph / kph): 130 / 209 ???? Wind Load @ Rated Velo (M / K): 150 / 68 ???? Mounting Mast Diam. (in / mm): 1.5-2.0 / 40-50 ???? Reflector Material: Aluminum Reflector ???? Finish: Electrostatic Powder Coat Radome ???? Material: ASA Anti UV Antenna System ???? Color: Flat Gray ???? Water Resistance: IPX Weather Rated ???? Operating Temperature (°C / °F): -40 to +60 / -40 to +140

Proxicast’s universal wide-band Yagi antenna is compatible with all 4G/LTE/xLTE data services from all major cellular service providers. It can also be used with 2.4 GHz Wi-Fi access points and 900 MHz radio systems.

This small, light-weight, easy-to-install directional antenna improves transmit and receive signals across a wide frequency spectrum range and is ideal for many outdoor applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, meters, homes and offices.

With the appropriate adapter cable (not included), this antenna is compatible with USB cellular modems and MiFi Hotspots, external 3G/4G cellular modems and routers from companies such as Cisco, Cradlepoint, MoFi, Digi, Pepwave, Proxicast, and Sierra Wireless. It is also compatible with most signal booster/amplifiers.

Electrical Properties
• Frequency Range: 698-2700 MHz
• Impedance: 50 ohms
• Gain: 11 dBi
• Beam Width: Vert. 60/55 degrees, Horiz. 90/70 degrees
• Polarization: Vertical
• VSWR: ADGP <>
• Max Input Power: 100 W

Mechanical Properties
• Connector: N Female on 12 inch LMR 195 pigtail (coax may be black or white)
• Material: ABS / Brass / Aluminum – RoHS compliant
• Operation Temp.: -40C to +60C
• Max Wind Load: 216 km/hr (134 mph)
• Weight: 794 g (28 oz)
• Dimensions: 290 x 200 x 120 mm (11.4 x 7.9 x 4.7 in) excluding 120 x 75 mm bracket
• Mounting: Pole or Wall (2.0 in dia. U-bolts & bracket included)

Directional antennas must be pointed toward a cell tower. For help locating your nearest tower, consult the OpenSignal or CellReception sites.

For MIMO applications mount 2 identical Yagi antennas at a 90 degree angle to each other.

Since 2000, USA-based Proxicast has been manufacturing innovative professional grade wireless equipment.

The Drive Reach is weBoost’s most powerful, in-vehicle cell phone signal booster yet. With its increased uplink output, users get signal up to 2X farther from towers with over twice the signal strength—signifying an increase of almost 5dB in uplink output power.The sleek, metallic red exterior of the Drive Reach isn’t just for show. The unique fin design increases surface area—displacing excess heat for peak performance. The custom bracket allows for under seat or in-trunk mount options. Reliable SMB connections on the booster make secure antenna installation a snap. CLA power cord features a USB-A port for rapid phone charging. With its enhanced cellular coverage, enjoy fewer dropped calls, better voice quality, faster data speeds, and extended battery life.Drive Reach simultaneously boosts cell signal for multiple users. Easy to follow instructions ensure hassle-free setup. Set the Drive Reach into its bracket and mount, plug it into the car’s power supply, place the magnetic roof antenna, and get on the road to better signal.Drive Reach also has a 2-year manufacturer’s warranty and a 30-day money back guarantee.

Explore the great outdoors and visit destinations across the U.S.—all without worrying about cellular connectivity with the weBoost’s Drive X RV cell signal booster. Designed for use with all RV classes—including Class A and Class C, and towable campers and travel trailers—weBoost has you covered no matter where your journey takes you. With 24.8 dBm uplink power, to 2.9 dBm downlink power, and up to 50 dB max gain and 33% farther range compared to the Drive Sleek booster, the Drive X RV gives multiple users coverage from all networks and carriers — even in remote areas or rural towns. Equipped with two power supply options, an AC/DC wall power supply and a hardwire power cord, for flexibility in installation of your cellular booster. All components you need to install the Drive X RV are included in one package with easy-to-follow instructions. Just in case you have any questions, our friendly U.S.-based customer service is here to support you.

The Drive 4G-X OTR is our most powerful in-vehicle truck signal booster certified in the US, with Wilson Electronics* ruggedized, all weather OTR Truck Omni-Directional Antenna for maximum connection range. The Drive 4G-X OTR boosts voice and data with max FCC-allowed 50 dB system gain, enhancing 4G LTE, as well as 3G and 2G network signals, up to 32x. Drivers get fewer lost connections and dead zones, better audio quality, faster data uploads and downloads with this premier signal booster. As with all weBoost boosters, all components needs for installation come in one package for easy DIY installation. The power supply plugs into CLA, while ignition power kits are also available. The Drive 4G-X OTR works with all cellular devices and all U.S. carriers. The booster kit comes with a 3-Way mount included, this antenna mounts to horizontal and vertical bars up to 1″ diameter or to surface of vehicle. Signal boosters increase cell signal by collecting signals with a powerful antenna, delivering those signals to the booster, amplifying the cell signals so your devices receive them, and delivering your device’s boosted signals back to the cell tower. 1. The outside antenna reaches out to the cell tower to access voice and data signals. Each device comes with everything you need for a complete installation. 2. The booster receives the outside signal from the outside antenna. 3. The booster amplifies the outside signal up to 32x, and sends it to the inside antenna. 4. The inside antenna broadcasts the boosted signal inside the vehicle. Extends cellular signal range Boosts voice & data on all networks up to 32x Fewer lost connections and better audio quality Faster data uploads & downloads Up to 2 hours additional talk time in weak-signal areas