512 reviews analysed
1. Replacement Water Reservoir for Keurig B40, B41, B44, B45, B50, K40, K45 Brewing Systems – 48 oz (Black)
Description
This 48 ounce water reservoir is a replacement part exclusively for the \”Elite\” and \”Classic\” Brewing Systems. (Brewer is not included.) Compatible ONLY with Keurig B4x/K4x models. This will NOT be compatible with the K50, K55 and the new K-Classic.PLEASE LOOK UNDERNEATH YOUR BREWER FOR THE MODEL NUMBER TO ENSURE COMPATIBILITY.
2. Blendin Replacement K-Cup Holder Part with Exit Needle, Fits Keurig K10, K40, K45, K50, K60, K65, K70, K75, K77, K79
Description
Fits Keurig Single Cup Coffee Brewer System Models: K10, K40, K45, K50, K55, K60, K65, K70, K75, K77, K79, B10, B40, B45, B50, B55, B60, B65, B70, B75, B77, B79
3. Keurig 4335457458 B01MXFTW88 2.0 Needle Cleaning Tool, kkk Orange
Feature
- Keurig 2. 0 Brewer maintenance accessory cleaning tool is for Keurig 2. 0 machines (will not work with other Keurig machines)
- Will not work with other brands of Coffee makers.
- Cleaning tool will only help with Cleaning clogged needles. Will not help with other Coffee maker issues.
- Includes instruction manual
- Genuine Keurig Product
Description
Keurig 2. 0 Brewer maintenance accessory cleaning tool is for Keurig 2. 0 machines. It will not work with other Keurig machines. It will not work with other brands of Coffee makers. Cleaning tool will only help with Cleaning clogged needles. It will not help with other Coffee maker issues. Includes instruction manual. Genuine Keurig Product
4. Brewslang K-cup Holder Replacement Part for Keurig B130, B140, B145, B150, B155, K140, K145, K150, K155, B3000 and K3000
Feature
- Brewslang K-cup Holder Replacement Part for Keurig Single Cup Coffee brewers.
- The K-cup Holder is a part that holds the k-cup which contains coffee blends.
- Package includes: One K-cup Holder Replacement Part
- Fits models: Keurig B130, B140, B145, B150, B155, K140, K145, K150, K155, B3000 and K3000
Description
– Factory Replacement Part for the Keurig Single Cup Coffee brewers that it holds the K-cup Coffee for brewing – Includes One K-Cup Holder And Exit Needle Replacement For Keurig. – K-cup Pods Holder Has Integrated Stainless Steel Lower Exit Piercing Needle.
5. Brewer Needle Cleaning Tool/Maintenance Accessory – Compatible With Keurig 2.0 – No More Grounds In Your Coffee or Partial Brews by Impresa
Feature
- NO MORE PARTIAL BREWS OR GROUNDS IN YOUR COFFEE: Are you getting partial / interrupted brews, grounds in your coffee, or a “water under pressure” message? There’s a good chance you have a clogged entrance / exit needle caused by a natural build-up of coffee grounds. Our tool removes those grounds and gets your Keurig (R) brewer running smoothly again
- LENGTHENS THE LIFE OF YOUR MACHINE: Our needle cleaning accessory is a key aspect of your brewer maintenance, along with regular cleaning and descaling. A clogged needle, if left untreated for too long, can lead your machine to break down. Don’t let that happen – regularly clean your brewing needle!
- COMPATIBLE WITH KEURIG (R) 2.0: Compatible with all Keurig (R) 2.0 and Plus Series brewers / coffee makers / coffeemakers, including model #s K200, K250, K300, K350, K375, K400, K450, K460, K475, K500, K550, K560, K575, K600, K650, K660, K675. Will not work with K55 Machine or K-Elite.
- EASY TO USE: Super simple to use – just a few minutes and you’ll be back up and running! Instructions below. NOTE: Will not work with non-Keurig (R) brewers or other Keurig (R) models not listed
- Please note: This is an aftermarket replacement product (produced by Impresa Products). We have no affiliation with or endorsement from any of the manufacturers mentioned
Description
INSTRUCTIONS FOR USE: 1) Ensure that your brewer is powered off. 2) Ensure that the silicone chamber is seated in the plastic holder with the entrance facing up. 3) Entirely fill the silicone chamber with warm water. 4) Lift the handle (where you would normally place a pod) and place the cleaning tool in the pod holder. 5) Ensure that the cleaning tool is fully seated and flush with the pod holder. If it is not fitting in, adjust until it fits smoothly. 6) Raise and lower the handle 5 times, each (5 ups and 5 downs). This will flush water through the needle to remove the coffee grounds. 7) Remove the cleaning tool from the pod holder. You will see collected coffee grounds. 8) Perform a cleansing brew, ensuring that there is a mug on the drip tray. NOTE: Ensure that the pod slot is empty during the cleaning brew. Some models may require you to hold down the brew button (to brew 6 ounces of hot water). 9) Once the brew is complete, pour the contents of the mug into the sink. Rinse the cleaning tool with warm water and allow to fully air dry. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Keurig (R) OEM product and Impresa Products has no affiliation with or endorsement from Keurig (R). Our product is not covered under any Keurig (R) manufacturer’s warranty. The Keurig (R) brand names and logos are the registered trademarks of their owners. Any use of the Keurig (R) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility. Does not work with K-Elite or K-55 Machines
6. Brewslang K-cup Holder Replacement Part for Keurig K10, K40, K45, K60, K65, K70, K75, K77, K79
Feature
- Brewslang K-cup Holder Replacement Part for Keurig K10, K40, K45, K60, K65, K70, K75, K77, K79
- The K-cup Holder is a part that holds the k-cup portion pack which contains coffee blends.
- Package includes: One K-cup holder and one bonus Brewslang coffee scoop
- Fits model: Keurig K10, K40, K45, K60, K65, K70, K75, K77, K79
Description
Brand bew k-cup holder replacemet part for keurig single cup brewer. Includes bottom punching needle.
7. Replacement Water Reservoir/Lid for Keurig 2.0 K500 Brewing Systems
Feature
- One 80 ounce water reservoir with lid replacement part
- Exclusively for the Keurig 2.0 brewer models K500 and K550
- Brewer is not included, please check your brewer model number before making a purchase
- Color: Black, as seen in image
- Keurig, K-Cup, and 2.0 are registered trademarks of Keurig Green Mountain, Inc. Sellers are not affiliated with Keurig Green Mountain, Inc
Description
This 80 oz. water reservoir is a replacement part exclusively for the Keurig 2.0 Brewing Systems. (Brewer is not included.) Compatible with K500/K550 models.
8. 3 X Replacement Part for Keurig My K-cup Reusable Coffee Filter Full 3 SET
Description
Allow users to use their own gourmet ground coffee in a Keurig brewer Easy to clean. Can rinse clean under running water after each use. Good gift for coffee lovers. Fits all Keurig home brewers except it DOES NOT FIT VUE, B130, B131, Office Pro or other commercial models.
9. Keurig Brand Replacement Drip Tray for Keurig Brewing Systems Models K400, K425, K450, K475, K500, K525, K550, K575
Description
Replacement Drip Tray for 2.0 Brewing System models K400, K450, K500 and K550. Fits models K400, K450, K500 and K550 only.
Conclusion
By our suggestions above, we hope that you can found Keurig Coffee Maker Parts 20 K Cup Holder for you.Please don’t forget to share your experience by comment in this post. Thank you!