Nowadays, there are so many products of jeyi active cooling m.2 heatsinks in the market and you are wondering to choose a best one.You have searched for jeyi active cooling m.2 heatsinks in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings jeyi active cooling m.2 heatsinks which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
644 reviews analysed
1. EKWB EK-M.2 NVMe Heatsink, Gold
Description
Whether you are looking for performance or simply in a qualitative product, this material will perfectly meet your expectations
2. Advancing Gene NVMe M.2 Cooler Heatsinks with 20mm Smart Fan (3rd Gen)
Feature
- ◉ Efficient Heat Dissipation Design – This NVMe M.2 cooler (heatsink) is specially designed for desktop computers, unibody pipeline design, built-in heat dissipation fins, with upper and bottom 2 heatsinks and 2 thermal pads, greatly improve the heat dissipation efficiency. Minimum installation height required: 10mm (Above the M.2 SSD). [Attention: This NVMe M.2 cooler doesn’t fit for M.2 SSD with chips on both sides, please check your M.2 SSD before purchase.]
- ◉ With a cooling effect of 10 – 30°C – Built-in upgraded 20mm 4-Pin PWM blower fan, low noise and no vibration, fan speed up to 10000rpm, supports PWM mode (Intelligent speed adjustment) and FG fan speed detection, with 10 – 30°C (50 – 86°F) cooling effect, this enhanced NVMe M.2 cooler is very suitable for gamers.
- ◉ High Purity Nano Thermal Pad – High purity Nano Silicon Grease material used, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. It can also protect the M.2 SSD from being crushed. Thermal pad dimensions: 70x20x1mm.
- ◉ Easy for Installation – This NVMe M.2 cooler is very easy to install, it only needs to buckle the upper heatsink into the bottom clasp, it doesn’t need any rubber band and metal buckles. The 2 thermal pads shall be mounted on the both sides of the M.2 SSD.
- ◉ Cautions and Quality Assurance – Please plug the fan of the NVMe M.2 cooler into 4-Pin fan socket of the motherboard and use PWM running mode, If it doesn’t have enough 4-Pin fan socket, please use the PWM fan splitter cable enclosed in the package. Please don’t plug the fan into RGB light power socket, otherwise it will damage the fan of the m.2 cooler.) Quality Assurance: 30-day money back, 1-year warranty and lifetime customer support.
Description
Features and Attentions:
1) Good compatibility: This M.2 NVMe Cooler is specially designed for desktop computers, it need a height of 10mm (Above the M.2 SSD) to install, the compact design makes it highly compatible so that it does not interfere with other components.
2) About Cooling Effect: As it’s an active M.2 NVMe Cooler, so it’s very effective, in the experimental test, it has 10 – 25°C cooling effect (Varies depending on the environments), the maximum cooling effect is up to 35 degrees if the fan run at the full speed.
3) About PWM Fan: As the speed of PWM fan is adjusted automatically according to the temperature of the CPU, so if the CPU temperature is very low, the fan will not work, once the CPU temperature reaches 40 – 50°C, the fan of the m. 2 cooler will start to work.
★ Why Choose Us? ★
1) Focus on Cooling Products: 5 years of experience in designing and manufacturing m.2 heat dissipation products, which has won the choice and trust of thousands of amazon customers.
2) Strict Quality Control (100% Tested): In order to provide buyers with a pleasant shopping experience, each item has been carefully inspected and properly packed before sending out.
3) Fast and Professional Service: We have professional after-sale service team, any questions or problems from buyers will be answered within 24 hours (Including holidays).
4) 1-year Warranty and 100% Money Back: We provide 1-year warranty service for all of the products we sell on Amazon, if you are not satisfied with our products, we can give you a 100% refund.
5) Continuous Improvement and New Product Launch: Maybe our products are not perfect, but we will continuously improve them according to customer’s reviews and market trends. We have professional R&D team, will continue to launch new products to meet customer needs and enhance our market competition ability, thank you.
3. JEYI Cooling Warship Fan NVME NGFF M.2 Heatsink 2280 ssd Metal Sheet Thermal Conductivity Silicon Wafer Cooling Fan Heatsink (Black)
Feature
- JEYI M.2 Disk Cooling Device, Cool Warship
- Support M.2 Discs, such as NVME NGFF
- Easy Installation, Large Area of Strong Heat Dissipation, Dust-Proof
- CNC Seiko to Creat, Good Heat Dissipation
- Tip: The item will be installed after the installation height of 8mm, pls confirm that there is enough space to install the upper
Description
Feature:
JEYI M.2 Disk Cooling Device, Cool Warship
Support M.2 Discs, such as NVME NGFF
Easy Installation, Large Area of Strong Heat Dissipation, Dust-Proof
CNC Seiko to Creat, Good Heat Dissipation
Tip: The item will be installed after the installation height of 8mm, pls confirm that there is enough space to install the upper
4. JEYI SK9 m.2 Expansion NVMe Adapter NGFF Turn PCIE3.0 Cooling Fan SSD Dual Add on Card SATA3 with Fan Aluminum Cover Capacitance
Description
Details:
JEYI NVME m.2 Expansion Card
Support: NVME+ M.2 NGFF (SATA)
Applies: PCIE X4 X8 X16 Slot
Advantage:
Two Port Cards, Dual voltage power
Integrated JEYI high-speed signal enhancement technique
Fan Cooling Strong Actively
Full Shielding Strong inhibition of EMI
5. JEYI Knight Power-Fail Protection PCIE3.0 NVME Adapter x16 Full Speed M.2 dd On Card Heat Sink Wafer Fan Cooling SSD
Description
JEYI SSD three-disc expansion card
Model: Red Knight
Support: M.2 NVME (PCIE) + NGFF (SATA)
Applicable: host server with PCIE X16 slot, etc.
Advantage:
Two sets of one card; JEYI power failure protection system
Don’t worry about firmware and data loss
Dual voltage and high power design
Industrial grade tantalum capacitor constant voltage filtering; Integrated JEYI high-speed signal enhancement technology
The fan has strong heat dissipation
Fully shielded to suppress EMI
6. JMT PCIE SSD M.2 2280 Heat Sink Radiator 3pin1 for SM951 960 961 Rapid Cooling Cooler Double Fan & Heatsink Fin Thermal Pad 3Pin Black Power Cord (Black)
Feature
- Thermal Pad, Cooling Fin and Fan Combined, Efficient Heat Dissipation and Prolong the Service Life of Hard Disk.
- Applicable to Various M.2 PCI-E SSD 2280 (Size 80mm*22mm),Thin and Mini.
- Easy to Install, Flexible Thermal Conductive Silicone Pad Can Adsorb Hard Disk Well,then Use the Attached Rubber Band to Tie the Heat Sink and SSD Together.
- Cooling Fan is Silent.
- 3pin Power Supplied by Motherboard.
Description
Feature:
Thermal Pad, Cooling Fin and Fan Combined, Efficient Heat Dissipation and Prolong the Service Life of Hard Disk.
Applicable to Various M.2 PCI-E SSD 2280 (Size 80mm*22mm),Thin and Mini.
Easy to Install, Flexible Thermal Conductive Silicone Pad Can Adsorb Hard Disk Well,then Use the Attached Rubber Band to Tie the Heat Sink and SSD Together.
Cooling Fan is Silent.
3pin Power Supplied by Motherboard.
Specification:
Type: Heatsink
Material: Aluminum
Power Supply Interface: 3Pin
Features: Easy Installation, Dual Fan, High Efficiency
3IN1 Radiator Size: About 70mm x 25mm x 20mm
Cable Length: About 30cm
Notes:
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Package Includes:
1 x Aluminum Radiator Fin
1 x Silicone Thermal Pad
2x Fan
7. JMT PCIE SSD M.2 2280 Heat Sink Radiator 3pin1 for SM951 960 961 Rapid Cooling Cooler Double Fan & Heatsink Fin Thermal Pad 3Pin Black Power Cord (Gold)
Feature
- Thermal Pad, Cooling Fin and Fan Combined, Efficient Heat Dissipation and Prolong the Service Life of Hard Disk.
- Applicable to Various M.2 PCI-E SSD 2280 (Size 80mm*22mm),Thin and Mini.
- Easy to Install, Flexible Thermal Conductive Silicone Pad Can Adsorb Hard Disk Well.
- Cooling Fan is Silent.
- 3pin Power Supplied by Motherboard.
Description
Feature:
Thermal Pad, Cooling Fin and Fan Combined, Efficient Heat Dissipation and Prolong the Service Life of Hard Disk.
Applicable to Various M.2 PCI-E SSD 2280 (Size 80mm*22mm),Thin and Mini.
Easy to Install, Flexible Thermal Conductive Silicone Pad Can Adsorb Hard Disk Well.
Cooling Fan is Silent.
3pin Power Supplied by Motherboard.
Specification:
Type: Heatsink
Material: Aluminum
Power Supply Interface: 3Pin
Features: Easy Installation, Dual Fan, High Efficiency
3IN1 Radiator Size: About 70mm x 22mm x 18mm
Cable Length: About 35cm
Notes:
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Package Includes:
1 x Aluminum Radiator Fin
1 x Silicone Thermal Pad
2x Fan
8. JEYI Cool Warship NVME NGFF M.2 Heatsink Aluminum Sheet Thermal Conductivity Silicon Wafer Cooling Warship Nvme Heatsink 2280m.2 (Black)
Feature
- JEYI M.2 Disk Cooling Device Cool Warship
- Support equipment: M.2 Discs, such as NVME NGFF
- Easy Installation, Large Area of Strong Heat Dissipation
- Dust Proof, CNC Seiko to Creat, Good Heat Dissipation
- Noted: This item will be installed after the installation height of 8mm, please confirm that there is enough space to install the upper
Description
Details:
JEYI M.2 Disk Cooling Device Cool Warship
Support equipment: M.2 Discs, such as NVME NGFF
Easy Installation, Large Area of Strong Heat Dissipation
Dust Proof, CNC Seiko to Creat, Good Heat Dissipation
Noted: This item will be installed after the installation height of 8mm, please confirm that there is enough space to install the upper
9. JEYI SeaShark Heat Sink Heatsink NVME NGFF M.2 U.2 Heat Dissipation Aluminum Sheet Thermal Conductivity Silicon Wafer Cooler
Feature
- JEYI M.2 Heat Sink, Silver-containing Alloy Aluminum Ensures better Cooling
- Disassembly and assembly do not require accessories or tools
- Strong heat dissipation in a large area with almost comprehensive coverage
- Add aluminum alloy aluminum alloy heat-dissipating aluminum, which has better heat conduction and heat dissipation performance
- Slim design, only increase the installation height of 1.5mm and the side installation width of 0.5mm
Description
Advantage:
Disassembly and assembly do not require accessories or tools;
Strong heat dissipation in a large area with almost comprehensive coverage;
Add aluminum alloy aluminum alloy heat-dissipating aluminum, which has better heat conduction and heat dissipation performance;
Slim design, only increase the installation height of 1.5mm and the side installation width of 0.5mm;
Suitable for most laptops and small installation scenarios.
10. JEYI Swift MX16 M.2 NVMe SSD NGFF to PCIE 3.0 X16 Adapter M Key Interface Ccard Suppor PCI Express x16 2280 Size m.2 Full Speed (MX16+ N80 Gold)
Description
Deatails:
PCIE NVME M.2 X16 Expansion Card, Model: Swift MX16
Input Interface: M-key M.2 NVME (Not Support SATA Protocol m.2 NGFF)
Output Interface/ Support Slot: PCIE X16
Support Devices: Various PCIE Protocols NVME M.2 SSD
Support System: Windows 8/ 10/ Linux
Conclusion
By our suggestions above, we hope that you can found Jeyi Active Cooling M2 Heatsinks for you.Please don’t forget to share your experience by comment in this post. Thank you!