671 reviews analysed
1. NEW HONEYWELL 30756150-001 CHART HUB KIT DATA ACQUISITION AND RECORDERS D433221
2. Quicksilver 835257Q1 Flo-Torq II Hub Kit – for Mercury/Mariner and MerCruiser Engines
Feature
- Flo-Torq II is the world’s first modular hub system for outboard and sterndrive engines
- Field serviceable: No need to miss time on the water waiting for rubber hub replacement work
- Flo-Torq hub systems cushion and protect the drivetrain from most impacts
- For use with Mercury/Mariner 40-60 HP Command Thrust, 70-250 HP, Force 90-120, and Verado 150-300
- For use with MerCruiser Alpha, Alpha One & Bravo One (under 400 HP)
Description
Quicksilver propellers can improve the performance of any boat through the use of Flo Torq hub systems. Flo Torq hub systems are durable, provide lower unit protection and are also field serviceable.
3. Southwest Wheel 5-Hole, 5" Bolt Circle Idler Hub for 3,500 lb. Axles
Description
Kit Contains: 1 – 10415WS 5-5″ Idler Hub 1 – HL154A Grease Cap 1 – L44649 Outer Bearing (1 1/16″ ID) 1 – L68149 Inner Bearing (1 3/8″ ID) 1 – 55846DL Seal 5 – X1023R Nuts
4. C.E. Smith Trailer Hub Kit Package
5. CE Smith Trailer Tapered 1-3/8" to 1-1/16" Stud (5 X 4 1/2) Galvanized Trailer Hub Kit
6. Rigid Hitch Trailer Hub Kit – for 1-3/8" Inner / 1-1/16" Outer Tapered Spindle – 5 Bolt on 4-1/2" Bolt Circle
Description
Hub assembly has 5-bolt pattern on 4½” circle. Includes L-68149 inner bearing, L-44649 outer bearing, SL-172 grease seal, SCP-100 cotter pin, DC-1505 dust cap, (5) STN-506 lug nuts and pressed in bearing races. Pilot diameter 2.59 inches, flange diameter 6.5 inches.
7. Rigid Hitch Trailer Hub Kit (BT-150-22-A) 5 Bolt on 4-1/2 Inch Circle – 1-1/16 inch I.D. Bearings
Feature
- Fits axles with a 1-1/16 diameter spindle and 1.25″ OR 1.50″ seal surface diameter
- Complete assembly with bearings, seals, dust cap, cotter pin and lug nuts
- Hub measures 4-1/4 inches tall (through center of hub)
- 2,200 lb capacity – 1/2-20 thread – 5 bolt on 4-1/2 inch bolt circle
- Read product description below for more information
Description
Hub has 5-bolt pattern on 4-1/2″ circle. Hub assembly includes (2) L-44649 inner and outer bearings, SL-150-1 (1.50 i.d.) and SL-122 (1.25 I.D.) double lipped grease seals, SCP-100 cotter pin, DC-1505 dust cap, (5) STN-506 lug nuts and pressed in bearing races. Pilot diameter 2.5 inches, flange diameter 5.56 inches.
PLEASE NOTE: This kit will only fit trailer axle spindles that have a 1-1/16″ bearing surface. This kit provides grease seals to work with axles that have 1.25″ OR 1.50″ seal surfaces. If you have any questions before ordering – call or email us, we can assist if you have a different spindle/seal size.
8. Southwest Wheel 5-Hole, 4.5" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle)
Feature
- 5 studs 4.5″ bolt circle using L44643 inner and outer bearings.
- Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts.
- Fits a BT8 Spindle (1″ OD)
- TruRyde hubs are pre-raced & all studs are 1/2″-20 with yellow finished zinc plating.
- TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
Description
TruRyde Kit Contains: 1 – KW71051WS – 5-4.5″ Idler Hub 1 – OEHL154A Grease Cap 2 – OEL44643 Bearings (1″ ID) 1 – T534823 Seal 5 – WPX1023R Nuts. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. All studs are 1/2″-20 with yellow finished zinc plating. Hubs are chemically cleaned and painted black in electrostatic booth. This hub kit is built for 3,500 lbs. Dexter, Al-Ko, Lippert, Hayes, Rockwell, or Quality trailer axles with a 1″ spindle.
9. Southwest Wheel 5-Hole, 4.5" Bolt Circle Idler Hub for 2,000 lb. Axles (BT9 Spindle)
Feature
- 5 studs 4.5″ bolt circle using L44649 inner and outer bearings.
- Contains TruRyde inner bearing, outer bearing, seal, grease cap and lug nuts.
- Fits a BT9 Spindle (1 1/16″ OD). All studs are 1/2″-20 with yellow finished zinc plating.
- TruRyde Hubs are pre-raced & pre-studded. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
- Designed for Dexter, Al-Ko, Lippert, Quality, and Rockwell Trailer Axles.
Description
Kit Contains: 1 – 71051WS – 5-4.5″ Idler Hub 1 – HL154A Grease Cap 2 – L44649 Bearings (1 1/16″ ID) 1 – 15192TB Seal 5 – WPX1023R Nuts. Designed for Dexter, Al-Ko, Lippert, Quality, and Rockwell Trailer Axles. Please Note will not work on UFP and some marine trailer axles. Make sure your bearing numbers match before ordering. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory. All studs are 1/2″-20 with yellow finished zinc plating. Hubs are chemically cleaned and painted black in electrostatic booth. This hub kit is built for 2,000 lbs. Dexter, Al-Ko, Lippert, Hayes, Rockwell, or Quality trailer axles with 1 1/16″ spindle.
10. Rigid Hitch Trailer Hub Assembly (BT-150-22-A-BBC) – 1-1/16 inch I.D. Bearings – with Chrome Bearing Buddies & Bras
Feature
- Fits trailer axles with a 1-1/16 diameter straight spindles
- 1.50″ I.D. & 1.25″ I.D. double lip grease seals included
- Hubs measure 4-1/4 inches tall with a 5-bolt on 4-1/2 inch bolt circle
- Kit contains bearings, seals, cotter pins, lug nuts and Bearing Buddies
- Read product description below for more detailed information
Description
Hubs have a 5-bolt pattern on 4-1/2″ circle. Hub assembly includes (4) L-44649 inner and outer bearings, (2) SL-150-1 double lipped (1.50″ I.D) AND (2) SL-122 1.25″ I.D. grease seals, (2) SCP-100 cotter pins, (10) STN-506 lug nuts and pressed in bearing races. Pilot diameter 2.5 inches, flange diameter 5.56 inches.
Also included is (2) chrome 1.980″ Bearing Buddy Bearing protectors (with bras) provide protection against damage from water and dirt entering the wheel bearings and make lubricating bearings a snap. Bearing Buddies prevent wheel bearing failure on boat, snowmobile, ATV, horse, RV and utility trailers. Proven in use for over 35 years and billions of miles of service!
PLEASE NOTE: This kit will only fit trailer axle spindles that have a 1-1/16″ bearing surface. This kit provides grease seals to work with axles that have 1.25″ OR 1.50″ seal surfaces. If you have any questions before ordering – call or email us, we can assist if you have a different spindle/seal size.
Conclusion
By our suggestions above, we hope that you can found Honeywell Chart Hub Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
