Top 9 Heating Wire

Wire Specifications:

– Diameter: 24 Gauge / 0.51mm

– Shape: Round

– Alloy Kanthal A-1

– Length 100 ft.

– Heat Treatment Annealed (soft)

– Melting Temperature 1500°C / 2730°F

– Max Continuous Operating Temp: 1400°C / 2550°F

– Resistance: 2.04 Ohms/ft at room temperature

Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.

This wire is for repair and maintenance of electronic components.  Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.

This WarmWire (R) floor warming installation kit contains everything needed for quick and economical installation of a radiant heat flooring system. It makes installation easy and will provide heat to warm the floors and help keep bathroom, kitchen and entry way floors dry and safe. This kit includes a 120 volt floor heating wire that covers a specified area square foot when installed with 3 inch spacing, a SunStat Pro II programmable thermostat, cable strap, double-sided tape, LoudMouth installation monitor, and an in-depth installation manual.

Nichrome is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, Kilns), a16030100ux0542 and high power rocket motor and recovery Ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in Kilns.

This is a heating element wire coil for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
Notice :
-Please stretch this heating element coil before connecting it to power, or it would burn and cause damage.
-Do NOT cut the heating wire into pieces, the shorter heating wire, the stronger power.
(eg. Cut one 1000W heating wire into two, each heating wire will turn to be 2000W.)

Kanthal A1 is a ferritic alloy rated for use at temperatures up to 1400°C (2550°F). The alloy has high resistivity and great oxidation resistance. It is typically used in furnace applications, such as electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, ceramics, and electronics industries.

Note: The difference between SF-104 and SF-102: SF-102 has the function of light and compressor, SF-104 has the function of compressor, fan and defrosting.If you need SF-102, please check this ASIN: B01L11NVE8

Features
& Small type integrated intelligent control, direct control of 1P or less (including 1P) compressors.
& Temperature Display / Temperature Control / Manual, automatic defrost heater / evaporator fan control / time, temperature terminated defrost / Set Memory / Parameter Lock / self-diagnosis
Technical parameters
1, external sealed transformer output: AC 12V (a transformer can be equipped with a temperature controller)
2, the temperature probe: NTC, 2 amended (storage temperature, defrost control) 2 m long (regardless of sign)
3, the temperature display range: -45~ 66 oC (-45 ~ 150 oF) Accuracy ± 1oC (± 2 oF)
4, the control temperature range: -45 ~ 45 oC (-45 ~ 120 oF) Default: 0oC (32 oF)
5, Dimension: 77x35x60mm, hole size: 71x29mm
6, the working environment temperature: -10 ~ 60 oC (14 ~ 140 oF); relative humidity 20% ~ 90% (no condensation)
7, the relay contact capacity:
& Compressors: normally open 20A/250VAC (a compressor can be used directly over to pick AC contactor)
& Defrost heating wire: normally open 10A/250VAC (1KW load can be used directly over to pick AC contactor)
& Evaporator fan: normally open 5A/250VAC
Packing list:
External transformer X1
Temperature probe X2

we will send the product to you as soon as possible. If you have any questions , please feel free to contact us.

Wire Specifications:

– Diameter: 20 Gauge / 0.81mm

– Shape: Round

– Alloy: Nichrome 80 (80% Ni, 19.5% Cr, 1.45% Si)

– Length 50 ft.

– Heat Treatment Annealed (soft)

– Melting Temperature 2552°F / 1400°C

– Max Continuous Operating Temp: 2150°F / 1180°C

– Resistance: 0.635 Ohms/ft at room temperature

Nichrome 80 Wire has a low temperature coefficient of resistance and a low change in resistance during its service life that combine to assure faster heat-up times, more uniform operating temperatures, and a longer useful life. Its excellent mechanical stability minimizes variables in element design, assures even stretch in coiled form, and eliminates problems of shrinkage, growth, sag, or distortion in use.

This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Nichrome 80 wire are: Industrial and hobby hot-wire foam cutters, internal support in ceramics, home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, glass, steel, and electronics industries.

Wire Specifications:

– Diameter: 22 Gauge / 0.64mm

– Shape: Round

– Alloy Kanthal A-1

– Length 100 ft.

– Heat Treatment Annealed (soft)

– Melting Temperature 1500°C / 2730°F

– Max Continuous Operating Temp: 1400°C / 2550°F

– Resistance: 1.31 Ohms/ft at room temperature

Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.

This wire is for repair and maintenance of electronic components.  Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.