799 reviews analysed
1. General Electric THQL2150 Circuit Breaker, 2-Pole 50-Amp Thick Series
Description
Product Description
GE, 50a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.
From the Manufacturer
This 120/240 volt GE 50 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 22,000 watts, include electric ranges (15 KW – 21 KW), electric ovens and central residential air conditioners (240 Volt, up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
2. Q250 50-Amp Double Pole Type QP Circuit Breaker
Feature
- N/A
- Imported
- Double pole, 50 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
3. Ge Circuit Breaker 50 Amp Bulk
Feature
- Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw
- May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger, Crouse-Hinds
- 15 to 30 amp 14 – 8 Cu or 12 – 8 Al AWG wire, 35 to 60 amp 8 – 3 Cu or 8 – 2 Al AWG wire, 70 to 100 amp 6-1/0 Cu or 4 – 1/0 Al AWG wire
- UL Listed, HACR rated
Description
GE, 50A, Double Pole Circuit Breaker, 240V, Bulk.
4. General Electric THQP250 Circuit Breaker, 2-Pole 50-Amp Thin Series
Description
Product Description
GE, 50a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.
From the Manufacturer
This 120/240 volt GE 50 amp, double pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800 watts, include electric baseboard heat, fan forced heat and 240 volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
5. GE THQB2150 Bolt-On Mount Type THQB Miniature Circuit Breaker 2-Pole 50 Amp 120/240 Volt AC
Feature
- Price For: Each Item: Bolt On Circuit Breaker Standards: UL Listed, CSA Certified Length: 3.28″ Depth: 2.38″ DC Voltage Rating: Not Rated Terminal Connection: Lug AC Voltage Rating: 120/240VAC Series: THQB Max. Wire Size: 3 AWG Frame Size: THQ Min. Wire Size: 8 AWG Max. AIR Rating: 10kA Amps: 50 Width: 2.00″ Circuit Breaker Type: Standard
- Number of Poles: 2 Country of Origin (subject to change): Multiple
6. Siemens QF250A 50 Amp, 2 Pole, 120V, 10,000 AIC Ground Fault Circuit Interrupter
Description
Testing GFCIs and afcis on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that afci/GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self test & lockout feature enables the dual function circuit breaker to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground/arc fault. This effortless system guarantees that only the best protection is given to your home at all times.
7. GE THQL2150GFT Plug-In Mount Type THQL Feeder Self-Test Ground Fault Circuit Interrupter 2-Pole 50 Amp 120/240 Volt AC
8. Q2100 100-Amp Double Pole Type QP Circuit Breaker
Feature
- na
- Made in USA
- Double pole, 100 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
9. MP250 50-Amp Double Pole Type MP-T Circuit Breaker
Feature
- Double pole, 50 Amp, 240V type MP-T Circuit Breaker
- 10,000 AIC interrupting rating
- Murray type MP-T circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
- Compatible with Murray rock solid load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The double pole Murray breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required.
Conclusion
By our suggestions above, we hope that you can found Ge 50 Amp Double Pole Breaker for you.Please don’t forget to share your experience by comment in this post. Thank you!
