791 reviews analysed
![Nato Magna Mount [2 Pack] Magnetic Car Mount Holder for iPhone X 8 7s 6s Plus 5s Samsung Galaxy S8 Edge S7 S6 Note 5 Note 4, any cell phones or Tablets, Universal 360 degree, devices less than 2 Ib](https://images-na.ssl-images-amazon.com/images/I/61yKe%2BNogVL._SL300_.jpg)
1. Replacement Suction Cup Mount Part 17.2mm Ball Joint for Car Phone Mount, Car Phone Holder, Phone Holder for Car, Magnetic Phone Car Mount for Windshield/Window/Dash/Dashboard Mount
Feature
- 【UNIVERSAL COMPATIBILITY】The Car Phone Mount pedestal replacement is fully adjustable with all 17.2mm swivel ball mounting bracket.[NOTE: Mounting bracket not included]. It is a best accessory replace your broken or inoperative car mount.Perfect replacement for broken or ineffective parts of your original part and save your cost one the car phone mount.
- 【EXTENDABLE ARM】Simply twist the button to adjust arm width that ranges from 4.7in to 6.3in and pivot up or down(240 degree adjustable)for optimal viewing height. Prevent from blocking your view while driving.
- 【SECURE ATTACHMENT】With the Ultra Sticky Suction Cup Pad, the car phone mount can stick tightly on the dashboard windshield or most surfaces except leather, vinyl and soft surface with the sticky gel on the base of the suction cup .（please use the included 3M VHB dashboard pad if the surface you want to mount is not smooth but textured.).
- 【SIMPLE SETUP】Easily install by press and lock the cup onto the dashboard windshield or table desk while Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE: please avoid to expose it to the sun in high temperature for a long time).
- 【WIDE APPLICATION】The Car Phone Holder can apply to windshield mounting/Landscape Orientation/Desk Mounting. With the excellent industrial work and the secure holding power of sticky suction cup pad, the phone holder is strong enough to hold tight to even the largest tablet or smart phone. Compatible iPhone mount, Samsung phone holder for Android, along with Google devices.
Description
Broad Compatibility
Compatible with all 17.2mm swivel ball mounting bracket.NOTE: Mounting bracket not included.
Perfect replacement for broken or ineffective parts of your original
Strong Sticky＆Reusable Suction Cup Mount
Quality suction cup along with sticky gel pad layer make sure the mount attach well to the dash or windshield and stay put even through the bumpy road.
Suction cup can be restored in mint condition by simply rinsing under warm water and air dry.
NOTE:
1.Compatible with 17.2mm Mounting Bracket (not included). If the swivel ball is not fit your bracket, please contact with us, we will provide you with full refund.
2.If the surface of your car s dashboard is not completely smooth, but textured, please use the 3M dashboard pad.The suction cup may not compatible with leather or vinyl dashboard. Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl.
3.Please avoid to expose it to the sun in high temperature for a long time in case reduce the using life of the suction cup.
If there is residue here, you can wipe it off with alcohol.
Package Contents:
1 x Suction Cup
1 x Sticky Gel Pad
1 x User Manual
Warranty
Our goal is to provide an exemplary level of customer service.
We provides LIFETIME warranty for a refund or replacement if any quality issue.
Feel free to contact us
2. Nato Magna Mount [2 Pack] Magnetic Car Mount Holder for iPhone X 8 7s 6s Plus 5s Samsung Galaxy S8 Edge S7 S6 Note 5 Note 4, any cell phones or Tablets, Universal 360 degree, devices less than 2 Ib
![Nato Magna Mount [2 Pack] Magnetic Car Mount Holder for iPhone X 8 7s 6s Plus 5s Samsung Galaxy S8 Edge S7 S6 Note 5 Note 4, any cell phones or Tablets, Universal 360 degree, devices less than 2 Ib](https://images-na.ssl-images-amazon.com/images/I/61yKe%2BNogVL._SL1240_.jpg)
Feature
- 2 Pack Bundle! Why buy one when you can share the love!
- Where do you use yours? Kitchen – Car – Bathroom – Motor Home – Boat??
- Powerful, Four Piece Neodymium Magnetic – will not harm your device!
- Strong 3M Mount Design: Super strong 3M adhesive helps keep the mount in place
- Full 1 year Guarantee – Wide Compatibility and Simple Design and Universally compatible with ALL smartphones and mini tablets
Description
You will get 2 individually boxed Nato Magna Mounts
Safe And Secure – Powered By A Permanent Neodymium Magnet. Neodymium Magnets Are The Same Magnets Used In Hard Drives And Are 100% Safe And Will Not Damage Your Device.
Universal – The Neodymium Smart Mount Works and installs quickly with all your devices-smartphones, tablets, GPS, and laptops 2 lbs or less.
Easy To Use – No Cradle, Clips Or Fasteners – Just Hold Phone Close To The Magnetic And It Will Locks In Place.
Friendly – 360° Positioning Means You’ll Always Have Your Device Within Easy View And Reach.
Super Easy to Install No cradle, clips or fasteners. Hold your device close to the magnetic surface and it locks into place. Installs in seconds and won’t fall off. Uses use the strongest 3M adhesive available so your Smart Mount stays in place even under rough conditions.
What’s In The Box?
Nato Magna Mount with 3M Mounting Adhesive
Small Round Metal Plate(1.57″)
Large Rectangle Metal Plate(2.28″x1.57″)
Extra 3M Mounting Adhesive
Cleaning wipes – Wet and Dry (for application)
Box image may not represent new box design
3. GPS holder GPS mounts FEIKU Crocodile NonSlip Dashboard Beanbag GPS Friction Mount for Garmin Nuvi, TomTom, Via GO and other 3.5-8 Inch GPS Devices and Smartphones
Feature
- GPS holder mounts phone horizontally with multiple different viewing angles.
- Universal GPS Car Mount reusable gel pad adheres to flat & curved dashboards
- Crocodile appearance design noble and generous. GPS holder car sleek design made of TPU avoids scratching phone
- Compatible with Garmin Nuvi, TomTom, Via GO and other 4-8 Inch GPS Devices and All Smartphones
- What you get: FEIKU crocodile clips vehicle mount, Welcome Guide, 18-MONTH FEIKU warranty & 30-DAY money back guarantee. FEIKU Manufacturer Direct Replacement Warranty (FEIKU is a register trademark with USPTO).
4. Bracketron NavGrip XL Car Dash Window Mount Holder for Tablets GPS iPhone X 8 Plus 7 SE 6s 6 Samsung Galaxy S9 S8 S7 S6 S5 Note Google Pixel 2 LG Garmin Nuvi TomTom Via Go Magellan DashCam Navigator BT1-651-2
Feature
- Are you planning a road trip and wanting the perfect phone holder to fit all your devices? This smartphone mount can expand up to 10 in, giving you low vibration to watch all your favorite movies and shows.
- The NavGrip XL can be easily transferred to a different car and it will continue to have the same stickiness as before. If the GPS holder does get dirty, just rinse the suction cup under warm water and let it air dry.
- This heavy-duty mount will secure all your devices. The NavGrip XL also has non-skid padding, so it will not leave any scratches. You will be able to access the device buttons and controls without any hassle.
- The NavGrip XL Dash and Window Mount is designed to be a universal holder for all your devices. You can place this phone mount in any vehicle, allowing you to be hands-free at all times.
- Press button to extend top grip. Squeeze down to ensure tight grip on device. Slide feet out for a wider base. Bottom grip is spring loaded for easy device insertion and removal.
Description
The NavGrip XL Dash and Window Mount is designed to safely allow you to mount your 7″ GPS , large phone or tablets up to 10″ for front seat navigational use. The larger than usual suction cup is made up of our Temporbond technology, which allows you to mount it to any smooth or textured surface without needing any messy adhesives. You can easily place and secure it by pressing the lever down. It is also transferrable between vehicles, just make sure that you clean the suction cup and dash with warm, soapy water, rinse and let it air dry before reattaching. The adjustable arms won’t interfere with your device’s controls. The NavGrip XL mount’s 360° rotating head adds even more versatility to the holder, allowing easy mounting in any orientation you prefer, while providing a secure base. The phone holder features rubberized grippers which will firmly hold your smartphone or tablet even on the bumpiest roads. This phone holder allows you to listen and watch to your favorite music and movies.
5. iBOLT TabDock FixedPro 360 -Heavy Duty Metal 8” Multi-Angle Drill Base Mount for All 7" – 10" Tablets (iPad, Nexus, Samsung Tab) for Desks, Tables, Countertops : Great for Homes, Businesses, etc.
Feature
- HEAVY DUTY – The FixedPro 360 is a heavy duty Multi-Angle Drill Base pedestal mounting solution for Tablets. It is designed to install directly on a table, cart, desk, in a vehicle, or on any flat surface. The FixedPro 360 allows you to mount your tablet where you need it most.
- STURDY- Has four points of contact holding on your phone and works with most cases including life proof and otter box cases. FixedPro 360 mount is incredibly strong and will stay where you mount it.
- UNIVERSAL DESIGN – fits all Tablets 7″-10″. ( iPad , Nexus , Sony Xperia , Kindle , Samsung Galaxy Tab ). This kit includes: TadDock tablet Holder, 8” multi-angle adjustable pedestal, screw pack and adhesive for drill base.
- GREAT FOR BUSINESS OR PERSONAL USE – Works with most smooth surfaces, and features and Aluminum 8” Multi-angle arm.HAs 3 adjustable points for optimal viewing positions. The FixedPro 360 is great for business, homes, vehicles, or schools.
- ADJUSTABLE – Rotates 360 degrees for optimal viewing positions. The 3 adjustable points offer freedom to completely adjust the arm to the optimal viewing position.
6. iOttie Adhesive Dashboard Pad for iOttie Car Mounts
Feature
- Sticks to Dashboard with high quality semi-permanent acrylic tape
- Acrylic Tape sticks to almost all textured and curved surfaces
- Compatible with all iOttie Dashboard Mounts for smartphones
- We strongly recommend using a Dashboard Pad to prevent possible damage that may occur if you apply suction cup directly to your dash
- This is a semi-permanent solution
- each pad is one-time use only. Once removed, it may not be reusable
Description
iOttie mounts are well-known for their unique Resuable Dashboard Pad. We now offer our optional but highly recommended accessory by itself for purchase. You can now have additional Resuable Dashboard Pad for improved mounting on textured or curved surfaces for your one touch mounts. Having additional Resuable Dashboard Pads gives our users more mounting location options than ever before. The Resuable Dashboard Pad can be easily attached and removed numerous times and does not leave any sticky residue behind. When the grip is losing its power, simply rinse and massage the Resuable Dashboard Pad under warm water and it will be restored back to its original condition.
7. ORIbox Magnetic Phone Car Mount with 6 Powerful Rare-earth Magnets, Super Sticky Suction Cup, Cell Phone Holder for Car Dashboard Windshield Air Vent, for All Phone, Classic E
Feature
- Oribox Magnetic Phone Car Mount with 6 Powerful Rare-earth Magnets, Super Sticky Suction Cup, Cell Phone Holder for Car Dashboard Windshield Air Vent, for All Phone
- Made of high-strength powder-coated, marine-grade aluminum for maximal durability & reliability. Plus its sleek design, this magnetic car mount is a perfect union of force & beauty. With ingenious no-screw design on telescopic arm, everything feels fluid.
- This magnetic car phone mount creatively features 6 rare-earth magnets that provide a super secure hold for all phones, tablets and case combinations even on the rough road.
- Innovative twist lock is the unique design which can lock the mount on the vent & never fall out on any parallel vent! The magnet mount can remain at a fixed angle thanks to the elaborate baffles on the 2-side of the clip without flapping or closing your vent.
- 1)The adjustable telescopic arm can be extended from 4.9″ to 7.7″, and also pivoted on 270 degrees for your best viewing angle and improve driving convenience. 2)Soft silicone rubber pad on the magnetic head fully protects your phone/case without scratching. 3)Extra sticky dash pad creates a flat area on dash for perfect mounting. 4)The stickiness of the suction pad can be easily renewed by rinsing.
Description
Oribox Magnetic Phone Car Mount with 6 Powerful Rare-earth Magnets, Super Sticky Suction Cup, Cell Phone Holder for Car Dashboard Windshield Air Vent, for All Phone. Innovative twist lock is the unique design which can lock the mount on the vent & never fall out on any parallel vent! The magnet mount can remain at a fixed angle thanks to the elaborate baffles on the 2-side of the clip without flapping or closing your vent.
8. SEGEMS – 3 in 1 Wireless Car Charger and Holder Vent Mounted with Extended Dash and Windshield Mount and Dual USB car Charger
Feature
- The SEGEMS Qi Car Wireless Charger is Qi-certified and supports fast charging. It adopts a brand new responsive smart chip to regulate the voltage and temperature of charging. The smart chip automatically detects foreign objects and selects optimal charging performances between 10W and 5W speeds depending on phone hardware and software. Note: Fast charging requires a QC3.0 car charger adapter which is included in the package truly a 3 in 1 and giving you that fast charging without extra cost.
- SEGEMS has just introduced the latest idea in Wireless Charger phone holder with an inductive charging station. The holder is offered as an air vent or dashboard mount. The dashboard mount option features an adjustable arm with 360° ball joint flexibility to ensure the best angles for safe driving. Alternatively, you can mount the charger on an air vent making phone calls and GPS navigation more convenient than ever. With the QC 3.0 USB fast car charger providing additional charging station. Wow
- The SEGEMS Qi Car Wireless Charger features our revolutionary Electric-Clamp technology which allows one hand operation thanks to its built-in advanced sensors. Simply place your phone in the holder and the wireless charger mount automatically clamps tight and begins charging. Release is just as easy. One touch of the back of the holder releases the phone. Clamp expands from 5cm to 7.5cm to adapt to various sizes of Qi-enable devices.
- At SEGEMS we take great pride in our quality and standards. Each and every SEGEMS device is CE, Qi and ROHS certified, if you demand quality, comfort, and reliability. We provide a 1 year Warranty for each purchase. If you ever have any questions about SEGEMS device, please contact us immediately for support and customer satisfaction. That is why we only want an honest review or our product. Best wireless car charger for Uber, Lyft and Taxi drivers
- SEGEMS is pleased to be the new market innovator in introducing the 3 in 1 Wireless Car Phone Charger with a Vent holder and Dash and Windshield holder couple with the QC 3.0 fast Car Charger making it 3 in 1 for complete convenience in wireless charging. SEGEMS is synonymous with Quality and Innovation. SEGEMS-The Brand that is Trending! Warranty includes replacement of defective or damaged product at no cost. Note: This product has a screen protector – remove to confirm product is new!
Description
SEGEMS – 3 in 1 Wireless Car Charger and Holder Vent Mounted with Extended Dash and Windshield Mount and Dual USB car Charger R1 Auto-Clamp Qi Fast Charging Windshield Dashboard Charger is sensitive so when not in use just pull the charger out a little to stop the holder from opening and closing when you removed the phone from the holder. Though after couple of opening and closing cycle it stops by itself but we advised just to pull out the fast charger to stop the reaction right away. We use our own product so we know! Not compatible with phone with cover! Large phone won’t fit.
9. INCART Magnetic Car Mount, Car Rearview Mirror Mount Truck Auto Cell Phone Holder for iPhone X/8/8Plus/7/6s, Samsung Galaxy S8/S7/S6 Edge, Google Nexus, GPS/PDA / MP3 / MP4 Devices and More (Black)
Feature
- ATTENTION BUYERS! This magnetic car rear view mirror mount only fit some small size car mirrors, please confirm your car mirror size before you buy, thanks ! Car Rearview Mirror Mount : only fit 2.1 – 2.4 (inch) width & 0.6 – 1.77 (inch) thickness car mirrors!
- OPTIMAL USAGE: 1) Paste the plate directly to the battery. 2) Apply the plate between the case and the phone (or other devices). 3) Apply the plate directly to the phone (or other devices).
- DESIGN FOR MOBILE NAVIGATION: It can keep your cell phone on horizontally or vertically, side to side, any angle you wanted.The clamp is firmly screwed to the car rearview mirror, it’s adjustable design fits different sizes of mirrors
- HOW IT WORKS: No cradles, brackets, clamps or gel and sticky residue,eliminates the unsightly features of most car mounts,direct to install on car mirror.
- EASY TO USE: Through solid, high-quality workmanship way,easy to install,no tools required.The magnetic technology is safe to use, and will not harm any smartphone. Along with being safe, it is also powerful, it attracts any phone to it quickly ¨C this is the auto-mount feature. The user can just bring the phone near the mount and it will take it easily, so the user no longer has to fuss about with safekeeping their phone.
10. Amarine Made (4X) Stainless Tournament Style Clamp on Fishing Rod Holder for Rails 7/8" to 1", Rail Mount Rod Holder
Feature
- This product is a 100% brand new Amarine-made product
- Can be mounted to vertical or horizontal rails – Adjustable for rails 21mm (7/8″) to 25mm (1″) diam
- Rubber insert to protect your fishing rod from any wear against the stainless surface
- Rod holder can be adjusted to 32 different angles when mounted
- Easy to install, mounting bracket includes bolts (allen key not included).
- Stopper slot built into the base of the rod holder to located the rod butt into position
Description
Product Description
This product is a 100% brand new Amarine-made product
4 x high quality, marine grade 304 stainless steel rod holder with marine grade 316 Stainless steel clamp-on mounting bracket Tournament Style
Mirror finished stainless steel construction , for sleek appearance and to suit today’s modern watercraft
Rubber insert to protect your fishing rod from any wear against the stainless surface
Can be mounted to vertical or horizontal rails – Adjustable for rails 21mm (7/8″) to 25mm (1″) diam.
Rod holder can be adjusted to 32 different angles when mounted
Easy to install, mounting bracket includes bolts (allen key not included)
Stopper slot built into the base of the rod holder to located the rod butt into position
Ideal for fishing boats with rails, where gunwale space may be limited
Specifications
4 x marine grade 304 stainless steel rod holder with marine grade 316 clamp-on bracket
Conclusion
By our suggestions above, we hope that you can found Dash Mount Junk Holder for you.Please don’t forget to share your experience by comment in this post. Thank you!
