Top 10 Dash Disk Mount 100Mm

The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.

Worried that your suction cup mount will damage your dash?
Your GPS and other devices are essential while driving. However, mounting pedestals can be sticky, and when placed on textured or soft dashboards, can be a cause of concern. It is recommended to use an adhesive mounting disk to ensure that your dash won’t be damaged or be left with residue once you decide to remove it.

The same goes for your suction mobile holder. Mounting your device allows you to easily and conveniently view your phone on your dashboard or even your windshield. It is best to keep these flat surfaces blemish-free by using an adhesive mounting disk.

With Crossery Adhesive Mounting Disk, you can keep your dash protected!

Universal for any 70mm smartphone, car camera or GPS suction mount, this disk adheres to the dashboard while your suction cup mount adheres to the disk. With a much larger size than your suction cup, you can ensure a secure fit.

Now, you can mount your suction mounting pedestal, including your mounting pedestals for Garmin and TomTom GPS device, to your car’s dashboard or windshield for easy viewing.

Still not convinced? These other benefits will help you decide:

? This car accessory fits any 70mm mount securely, so your pedestal won’t fall off.
? The strong adhesive ensures that your device will not drop even if it is placed on your windshield.
? The disk is compact and doesn’t take up much space on your dashboard.
? It is a practical gift for friends and family. After all, who does not have a mobile phone?
Keep your dashboard and windshield protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!

The iSaddle Rotating Car Mount Dashboard Disk has a simple, sleek and discrete design to compliment the interior of any vehicle. Effortlessly transform your dashboard into a “glass-like” surface to make it compatible with most windshield-style car mounts, GPS device mounts and any other similar device mounting systems. No tools are required to install – simply adhere to the dashboard using the strong adhesive base and your Dashboard Disk is ready to go. Equipped with a full 360 degrees of rotation, allows for optimal viewing adjustments for all drivers. Once you find that perfect viewing angle, one simple press of a button will lock the Dashboard Disk into place to keep it from moving while you’re on-the-go. With a strong-hold, adhesive base and a durable design the iSaddle 360-Degree Rotating Car Mount Dashboard Disk is the perfect addition to your vehicle.

The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.

Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.

Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.

Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.

Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.

Package
2 * 70mm Adhesive Mounting Disk

Fits for Toyota Prius 2003-2009 Toyota Prius aftermarket double din radio installation

The 70 mm round console disk can transform any windshield mount into a console mount. The 3M adhesive is strong yet leaves no residue when removal is required.

If you’re looking for a rigid fork for your custom hardtail or singlespeed ripper, the Whisky Parts Co. No. 9 29 MTB Fork is a worthy choice. With a tire clearance of up to 29 x 3. 0in or 27. 5 x 3. 25in, it breathes new life into rigid mountain or plus frames while absorbing light trail chatter. The No. 9 MTB Fork is constructed from unidirectional carbon fiber throughout, and features a tapered steerer tube and thru-axle dropouts for strength and predictable steering.

The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include a 12mm thru-axle for precise handling, clearance for high-volume road tires and internal cable routing. Flat mount disc brake capability offers clean caliper fitment, and backwards compatibility with post mount brakes.