The Best Dash Blinker

Cut Hole size: 8mm (5/16″)
Wire Gauge: 22 AWG
LED Color: Green
Current Rating: 15mA
Voltage: 12V DC (resistor built in)
Wire Length: 20mm (8″)
Bezel Color: Black

The Kuryakyn 4709 Diode kit is required when installing L.E.D. lights as turn signals on a motorcycle with a single turn signal indicator light on your dash. If not installed, power will back-feed across the indicator light and all turn signals will flash at once. Includes (1) Diode wire assembly and (1) 6″ ground wire – black; suggested tools for installation (not included): wire stripper/cutter, soldering iron, solder, heat shrink. The Kuryakyn 4709 Diode kit is compatible with models containting a signal turn indicator bulb on dash; recommended for use when incandescent signal bulbs are replaced with LED signals.

Cut Hole size: 8mm (5/16″)
Wire Gauge: 22 AWG
LED Color: Green
Current Rating: 15mA
Voltage: 12V DC (resistor built in)
Wire Length: 20mm (8″)
Bezel Color: Silver

Get Street Legal
Get your Can-Am Maverick X3 ready for the road with a Deluxe Plug and Play Turn Signal Kit from SuperATV. It’s pre-assembled, color-coded and tailor-made for your X3 so you can get your UTV one step closer to being street legal. Our kit is

Deluxe Plug and Play Kit
Our Deluxe kit is tough, easy to install, and comes with everything you need including a compact horn and full set of rocker switches. The fully-sealed control box is water resistant to coincide with IP67 standards. That means it won’t short out even when immersed in three feet of water for thirty minutes. The connectors are all simple OEM-style plugs to make installation easy and secure, and it comes with enough dielectric grease to keep water out of every connection. Plus, it uses the factory brake lights for the rear signals.
It’s easy to install at any skill level. From the tail lights, to the front indicators, to the dash cluster, it really is plug and play! 

FITMENT

• Can-Am Maverick X3 900 : 2018+
• Can-Am Maverick X3 Turbo : 2017+
• Can-Am Maverick X3 Turbo R : 2017+
• Can-Am Maverick X3 X DS Turbo R : 2017+
• Can-Am Maverick X3 X RC Turbo : 2018+
• Can-Am Maverick X3 X MR Turbo : 2018+
• Can-Am Maverick X3 MAX Turbo : 2017+
• Can-Am Maverick X3 MAX Turbo R : 2017+
• Can-Am Maverick X3 MAX X DS Turbo : 2017+
• Can-Am Maverick X3 X RC Turbo R : 2018+
• Can-Am Maverick X3 X RS Turbo R : 2017+
• Can-Am Maverick X3 X MR Turbo R : 2018+
• Can-Am Maverick X3 MAX X RS Turbo R : 2017+

Mounting Cut Hole: 12mm (1/2″)
Head Diameter: 15.80mm (0.62″)
Bulb Type: LED
LED Color: Green
Lamp Voltage: 12V DC
Current Rating: 15mA
Wire Length: 8″
Wire Gauge: 18
Bezel Color:Black
Body Material : Chrome Plated Copper
Panel Thickness: 1-10mm
Description:Single Arrow
* Not Polarity Sensitive
Resistor Built-in

Single DIN Dash Installation Kit for 2010-Up Ford Fiesta Vehicles. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit. High-grade ABS plastic construction. Factory style texture. All necessary hardware to install an aftermarket radio.

Black Housing
Screw Base
Max size wire: 1mm
LED Color: Green