Nowadays, there are so many products of cvt for 13 hp engine in the market and you are wondering to choose a best one.You have searched for cvt for 13 hp engine in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cvt for 13 hp engine which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
764 reviews analysed
1. Briggs and Stratton 21R807-0072-G1 Simpson 11.5 HP Intek Engine, Black
2. GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4" OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES
- unique engine bolt kit for predator engines and the correct anti vibration pilot washer.
- 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
- small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter
- A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
- Engagement range is approximately 2350 RPM
This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.
Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).
This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
Engine compatability: Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.
3. MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420
- 【30 Series Torque Converter Clutch Kit】 This 3/4″ Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
- 【The Belt Feature】 Length: 70.5cm / 27.76″, Outside circumference: 27 23/64″ , Width is 3/4″.（1.9cm / 0.75″). Center to Center of driver and driven: 6-15/16 to 7″.
- 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
- 【Go Kart Torque Converter Kit comes with】1 x 3/4″ Driver Pulley
- 1 x 5/8″ Driver Pulley
- 1 x Plastic Assy Cover
- 1 x Aluminum Mounting Plate
- 1 x Drive Belt
- 1 x 10 Tooth Sprocket for #40/41/420 Chain
- 1 x 12 Tooth Sprocket for #35 Chain(Chain not included)
- 1 x Full Mounting Hardware. Note This is not made by Comet
TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan
This is a quality after market reproduction of the Comet made TAV2 Torque converter kit. Designed to be used on go-karts, mini-bikes and wake wrenches with engine sizes 3hp to 7hp. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket.
Large Pulley Driven unit: Dia. 157mm or 6"
Driver clutch bore: 3/4"
Top width: 19mm(3/4")
Sprocket teeth: 10 tooth for #40/41 chain and 12 tooth for #35 chain
Engagement range: 2350-200 RPM
Recommended engine: 2HP – 7HP engines, 3/4"shaft with flat key
Fits all engines with a 3/4" Straight Crankshaft.
This Kit Includes:
1 x Drive Belt
1 x Plastic Cover
1 x 3/4" Driver Pulley
1 x 5/8" Driven Pulley (6" Diameter)
1 x Aluminum Mounting Plate
1 x 10 Tooth Sprocket for #40 #41 Chain
1 x 12 Tooth Sprocket for #35 Chain
1 x Mounting Hardware Kit
This kit has everything you will need!!
Please see pictures for all that is included.
4. The ROP Shop | Inlet Air Filter Kit for Predator Engines 68120, 69730, 60363 with 212cc & 6.5HP
- The ROP Shop replacement Inlet Air Filter Kit for Predator Engines 68120, 69730, 60363 with 212cc & 6.5HP
- Specs – Refer to images 2 & 3 for more information
- Includes – (1) Inlet Air Filter, (2) Filter-to-Carburetor Mounting Studs, (1) Aluminum Adapter, (1) Choke Hold Bracket, (1) Hose Clamp & Hardware
- comes as shown in the first image
- Please be sure to check your part or model number to ensure this is the correct air filter intake kit for your unit
Inlet Air Filter Kit for Predator Engines 68120, 69730, 60363 with 212cc & 6.5HP
Please review all product information to ensure that this product is compatible with your unit.
A Message to the Customer
The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:
- Model and/or Sub-model
- Spec and/or Type Number
- Code and/or Serial Number
- Engine Horsepower
Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.
-The ROP Shop Staff
5. Mengxiang 499952 Carburetor with 491588 Air Filter 495606 Carburetor Overhaul Kit for Briggs and Stratton 92200 091252 091202 091212 091232 092202 092212 092232 092252 094202 095202 095212 Engine
- Carburetor for 499952
- Air filter for 491588 491588S 399959 4101 5043,Pre-Filter for 271933 491435 491435S 493537 493537S ,Carburetor Overhaul Kit replace number: 495606 494624
- Fit for 92200 Series (0007-1250)
- Fit for 091212-1331-E1
- 092232-1007-E1 Engine
- Fit for 092232-1035-E1
- 095212-0194-E1 Engine
Package include 1 carburetor,2 gasket,1 air filter,1 pre filter,1 spark plug,1 Carburetor Overhaul Kit
Fit for the following models:
92200 Series (0007-1250) ; 092252-1229-E2;091252-1049-E2;091252-1049-E4;091252-1049-E5;091252-1250-E2;091252-1259-E1;091252-1278-E1;091202-1309-E1;091202-1361-E1;091202-1372-E1;091202-1383-E1;091202-1016-E1;091202-1017-E1;091202-1212-E1;091202-1241-E1;091202-1244-E1;091202-1249-E1;091202-1258-E1;091202-1264-E1;091202-1300-E1;091212-1022-E1;091212-1230-B1;091212-1237-E1;091212-1240-E1;091212-1267-E1;091212-1267-E2;091212-1269-E1;091212-1290-E1;091212-1331-E1;091212-1360-E1;091212-1370-E1;091212-1379-E1;091212-1381-E1;091232-1014-E1;091232-1035-E1;091232-1035-E2;091232-1036-E1;091232-1040-E1;091232-1213-E1;091232-1214-E1;091232-1229-B1;091232-1229-E1;091232-1234-E1;091232-1253-E1;091232-1265-E1;091232-1286-E1;091232-1286-E2;091232-1298-E1;091232-1310-E1;091232-1325-E1;091232-1328-E1;091232-1332-E1;091232-1363-E1;091232-1369-E1;091252-1049-E1;092202-1242-E1;092212-1246-E1;092232-1007-E1; 092232-1035-E1;092232-1036-E1;092232-1040-E1;092232-1230-E1;092232-1238-E1;092232-1241-E1;092232-1243-E1;092232-1244-E1;092232-1245-E1;092232-1249-E1;092252-1049-E1;092252-1049-E3;092252-1049-E5;092252-1049-E6;092252-1229-E3;092252-1237-E1;094202-0115-E1;094202-0117-E1;094202-0118-E1;095202-0117-E1;095212-0118-E1;095212-0194-E1 Engine
6. Briggs & Stratton 716111 Fuel Shut-Off Valve For 4, 5.5 and 9 HP Vanguard Engines
This Briggs & Stratton fuel shut-off valve is for 4, 5.5 and 9 HP Vanguard engines.
7. Alibrelo 212CC Carburetor Recoil Starter for Harbor Freight Predator 60363 68121 68120 69730 69727 Engine R210 Gas Engine Honda GX160 GX200 5HP 5.5HP 6.5HP Parts Tune Up Kit 16100-ZH8-W61
- For Honda GX140 GX 140 GX160 GX 160 GX168 GX 168 GX200 GX 200 5HP 5.5HP 6.5HP Engine
- 212cc Carburetor for Harbor Freight Predator 6.5hp Go Kart OHV Engine.212CC Carburetor fit Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)
- For Honda WP30X water pump, Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 generator
- Carburetor for Honda 16100-ZH8-W51 16100-ZH8-W61 16100-ZE1-814 16100-ZE1-825
- Recoil starter for 28400-ZE1-003ZF, 28400-ZH8-013YA, ignition coil for 30500-ZE1-033, 30500-ZE1-063, air filter for 17210-ZE1-505
- Come with 1 carburetor,1 air filter,1 fuel filter,3 gasket,1 fuel line,2 clamps,1 joint fuel filter,1 spark plug,1 ignition coil,1 insulator,1 recoil starter,1 cup,1 switch,1 oil sensor
180 days money back guarrantee! Lifetime warranty against manufacturer defect!
Honda GX140 GX 140 GX160 GX 160 GX168 GX 168 GX200 GX 200 5HP 5.5HP 6.5HP Engine
212cc Carburetor for Harbor Freight Predator 6.5hp Go Kart OHV Engine.212CC Carburetor fit Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)
Honda WP30X water pump, Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 generator
8. K&N Engine Air Filter: High Performance, Premium, Powersport Air Filter: 1986-2006 KAWASAKI (VN750 Vulcan) KA-7586
- ULTIMATE LONGEVITY: 10-Year/Million Mile Limited Warranty protects for the life of your vehicle.
- ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration. Clogged or dirty air filters can reduce your vehicle’s acceleration by up to 10%.
- EASY INSTALLATION: Pre-oiled and ready to install. One of the easiest and most cost-effective upgrades for your motorcycle or ATV for quick performance gains.
- SAVES MONEY: K&N high-flow replacement air filters will save you $250 over 10 years by avoiding disposable filters.
- ECO-FRIENDLY: Using a washable, reusable product helps reduce replacement waste. A K&N filter will last longer than 10 disposable filters.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants.
- HIGH QUALITY: Made in America.
K&N performance High-Flow Air Filters are engineered to improve engine performance by increasing airflow up to 50%. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your motorcycle, ATV, or Side-By-Side vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world’s toughest race tracks, so we can bring the highest level of performance for your journey. Join the millions of customers who have saved money and improved performance by upgrading to K&N filtration. Fitment Information: 1986-2006 KAWASAKI VN750 Vulcan
9. Bullet Lines 1" Bore 40 Series Torque Converter Driver Pulley, Fits 8-18 hp Engines, Replaces Comet 40D or 40/44 Series Pulleys 203015, for Go Kart and Golf Cart Belt Drives
- Bullet Lines 40 series torque converter driver clutch replaces Comet 40 Series Torq-A-Verter models 209133A, 209133, 2432, 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
- Symmetrical belt inline small engine clutch that fits 1 inch Engine Shafts: Requires a 7/8 inch width Symmetrical Belt
- Worlks with 8 – 18 HP engines – Engine Engagement 1600 – 3300 RPM
- Comet 40 Series Torq-A-Verter
- Great for Go Karts and Golf Carts
Bullet Lines 1″ torque converter driver replaces Comet 40 Series Torq-A-Verter models 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
Bullet Lines 1″ 40 series torque converter driver is a symmetrical inline small engine clutch that replaces Comet 40/44 Series Torq-A-Verter models 203015A, 203015, and works with 8 – 18 hp engines within the 1600 – 3300 RPM range. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission providing higher speeds, and smoother acceleration. The 40/44 series is heavily used in three wheelers, ATV’s, LTV’s, go karts, and other transportation vehicles. Commercial uses include oil well pumps, tractors, tillers, lawnmowers, construction, and industrial equipment.
This torque converter fits 8 – 18 hp engines with a 1″ shaft,1/4″ keyway, and tapped end.
Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.
The Torque Converter assembly includes:
All respective trademarks and registered trademarks appearing on this website belong to their respective owners
By our suggestions above, we hope that you can found Cvt For 13 Hp Engine for you.Please don’t forget to share your experience by comment in this post. Thank you!