Top 10 Craftsman Ii 5 Hp Belt

A made with Kevlar replacement belt costing less than the OEM. Belt is made to FSP specs, 1/2 X 95.5″ (2425.7 mm). Used on many 42″ decks, and used on some three blade decks as a secondary belt. Kevlar corded lawn and garden belts have become increasingly popular over the last few years due to their extreme strength, durability, and value-added pricing. Kevlar corded belts, also called Aramid or extra-heavy duty belts are constructed of organic polyaramide fibers that are manufactured using complex chemical processes. **Interesting fact: Kevlar is the same material bulletproof vests are constructed with. Kevlar is used in PIX belts as a tension member because of its inherent stability and high tensile strength Cord – To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower or on the deck on a walk-behind. If you have a John Deere, the model number is on the side of the tractor, and will also be printed on an identification tag located below the operator’s seat or on the back of the lower frame between the rear wheels. The serial number (PIN) is 13 or 17 digits long. If you have a Hustler, the model and serial number decal is located on the frame directly below and to the left of the operator’s platform or on the left frame side rail.

MTD 954-04002 Exact Replacement Belt Measures 5/8-inch by 31 1/2-inch.

MaxPower’s 561713 2-blade set for 42″ cut Craftsman/Husqvarna/Poulan replaces 127843, 138498, 138971, 138971X431, 53-21389-71, 53-21278-43, and 53-21384-98. Each blade measures 21″ long by 2-1/4″ wide with a 5 pt. star center hole. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specifications.

MaxPower’s 336319 deck drive belt for 46″ cut Poulan/Husqvarna/Craftsman replaces OEM No. 405143, 532405143, 58445310, PP21008, 575937701, and 7133156. Also replaces Ariens OEM No. 21546607. This belt measures 105-3/4″ in length and 1/2″ in width. Fits 2007 models with 46″ twin blade decks. Double covered, aramid cord construction. MaxPower’s extensive line of replacement belts are manufactured to meet or exceed OEM specifications.

MaxPower’s 561556 includes a (2) blade set for a 42″ cut MTD, Cub Cadet, & Troy-Bilt mowers. These blades replace OEM No. 942-04312, 942-04308, 742-04308, and 742-04312. Also replaces Toro 119-8456. Each blade measures 21-3/16″ by 2-1/4″ & adapts to a 6 pt. star center hole. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specifications.

The CALIFORNIA AIR TOOLS 10020C Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 Hp air compressors in the industry having only 70 decibels of sound. The Powerful “New” 2.0 HP (SP-9421) motor operates at only 1680 RPM creating less noise and less wear. The “New” SP Series of Ultra Quiet Air Compressor Motors have been designed to increase duty cycle and allow for longer continuous run times. The Oil-Free Dual Piston Pump System is engineered for high performance and durability. The CAT-10020C Air Compressor has an Oil-Free Dual Piston pump designed to have a life cycle before wear of 3000 plus hours compared to other comparable air compressors with life cycles of 500 hours or less. The Oil-Free pump allows for use in a variety of temperatures (cold starts) and uneven terrains (no oil in the pump). The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for an easier start up in cold temperatures. The large 10 Gallon Steel Air Tank with wheel kit makes it very easy to move around the jobsite, shop or garage. Designed for the person looking for Power, Air Flow, Less Service and Maintenance with at Least 30% Less Noise!.