Top 9 Cooling System Flush

THEROCURE by Evapo-Rust cures engine overheating by removing the rust from your cooling system. If your car, truck, or tractor is overheating, try Thermocure. Just 1 quart will service cooling systems up to 3 gallons. THERMOCURE Cooling System Rust Remover & Flush uses the technology in rust and corrosion removal to completely revitalize any water cooled engine. It removes rust scale and deposits from radiators, water pumps, water jackets, engine blocks, and heads. Thermocure will restore your engine’s ability to transfer heat to the coolant, which allows engines to run cooler and last longer. Thermocure is non-toxic, contains no acids, is biodegradable, safe on skin, and has no fumes. THERMOCURE Removes even heavy rust completely, is non-toxic, non-corrosive, is safe on skin and eyes. Contains NO acids, bases, solvents or other toxic ingredients, it will not harm un-rusted steel, safe on other metals, plastic, PVC and most paints.

Fast flush formulation that is compatible with all coolant types and contains no petroleum distillates. Use to flush engine cooling system whenever coolant is changed or repairs are required. Does not require the use of a neutralizer. Safe for aluminum water pumps. Meets Ford specification ESR-M14P7-A. Available in 22 fluid ounce bottles.

Provides the technician with an easy way to flush the heater core. Simply remove radiator cap and drain the coolant. Remove heater hoses from the engine, placed the stepped adapter end of the THX356 Back Flush tool into the hose opposite of the one connected to the water pump. Connect the adapter to the shop water supply. Turn water supply on and open the valve to allow water to flow through the heater core. Once you see clear, clean water, you heater core is clean.

Allows for easy flushing of the cooling system, keeping it at peak efficiency. Cleans system of debris and contaminants including saltwater, sand and sediment. Helps prevent accumulation of debris and contaminants. Makes using salt elimination treatments, engine flushes, cleaners; and corrosion inhibitors a breeze. Fits: Yamaha Wave Venture 1100 96-97, Blaster 760 96, Wave Runner 760 97-98, GP800 98-05, XL760 98-99, XL1200 98-01, GP1200/R 97-02, GP1300 03-08, XL800 99-01, XLT1200 02-05, XLT800 02-04, SUV 99-04, FX All 03-12, VX All 05-12, FZ All 09-12, All Jet Boats 96-12.

OTC’s No. 6043 Blast-Vac Multipurpose Cleaning Gun is perfectly suited for quick and efficient cooling system flushing. Simply attach it to radiator or heater hoses and you’re in business. Also useful for washing engines and even shop floors. Just two simple connections – one to shop air, the other to a standard water faucet – creates a unique air/water vortex blast for powerful cleaning capabilities. The tool can also be used to vacuum by turning the venturi inside the gun in the opposite direction. Air flow is reversed to create a strong vacuum. Note: While normal water pressure will handle the majority of a cooling system flush situations, short blasts are sometimes needed to loosen some contaminants from within the system. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

Simply remove radiator cap and drain the coolant. Remove heater hoses from the engine, placed the stepped adapter end of the Back Flush tool into the hose opposite of the one connected to the water pump. Connect the adapter to the shop water supply. Turn water supply on and open the valve to allow water to flow through the heater core. Once you see clear, clean water, you heater core is clean.

Prestone Flush ‘N Fill Kit professionally back-flushes cooling systems of most cars and light trucks on the road today. Easily installs anti-freeze/coolant in minutes. Rust and dirty coolant that circulates in your car’s cooling system can lead to a clogged radiator, resulting in overheating and engine damage. Draining the radiator alone does not sufficiently remove old coolant, as the radiator may contain 40 percent or less of the coolant. The Prestone Flush ‘N Fill Kit allows you to professionally flush the complete cooling system, not just the radiator, in one easy process.