Finding your suitable readers for cooling incubator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling incubator including detail information and customer reviews. Let’s find out which is your favorite one.
861 reviews analysed
1. IVYX Scientific Mini 5L Incubator – Precise Temperature Control from 0°C to +65°C, 12V/110V
Feature
- VERSATILE: Can be set as a refrigerator or warm incubator
- PRECISE TEMPERATURE CONTROL: from 0°C to +65°C in increments of 1°C. If kept on the same shelf, temperature fluctuations of 0.5°C
- CAN BOTH HEAT AND COOL: Can cool down down ~23°C below ambient temperature, heat up to 65°C
- SMALL FOOTPRINT: external dimensions of 8x11x12 in, internal dimensions of 6x6x10 inches. 5L capacity while only weighting 9 lbs
- PORTABLE: 110V Standard power cord included, as well as a 12V car adapter allowing it to run on the go
Description
This incubator functions as a refrigerator or warm incubator by means of a thermoelectric (Peltier) system. Two removable shelves creates 3 platforms. The desired temperature is set on the digital LED display, and the incubator immediately starts heating or cooling, while accurately monitoring the temperature inside and displaying it on the LED panel. NOTE: There is a temperature gradient inside the unit, but the temperature is stable within each shelf.
HEATING
The mini incubator can heat samples up to 65°C while using only 46W at 110V. A temperature gradient is present inside the chamber: the temperature at the top shelf is higher than on the bottom shelf. Within each shelf, the temperature only fluctuates by 0.5°C.
COOLING
The mini incubator is able to cool down ~23°C below ambient temperature, using only 54W at 110V. While technically able to be set to -18°C, at normal room temperature it will go down to -3°C. Again, a temperature gradient is present between the top and the bottom, but within each shelf, the temperature fluctuates by only 0.5°C
SMALL FOOTPRINT
With a small footprint of 8 in x 11 in x 12 in, this mini incubator will not take valuable space while having a 5L (6x6x10 in) chamber volume.
PORTABLE
At only 9 lbs the mini incubator is easy to move around. A 12V DC car power cord allows the unit to heat or cool your samples on the go.
SPECIFICATIONS:
Power: 46W (heating) – 54W (cooling)
Voltage: 110V AC/ 12V DC
External dimensions: 8x11x12 inches / 20x28x31 cm
Internal dimensions: 6x6x10 inches / 15x15x25 cm
Weight: 9 lbs / 4 kgs
Volume: 5 Liters
Temperature range: -5°C to +65°C
Temperature fluctuations: +/-0.5°C (if kept on the same shelf)
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
3. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
Feature
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
Description
Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual
4. Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
Feature
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
5. KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 1100W with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles
Feature
- DUAL RELAY OUTPUT AND TWO TEMPERATURE SETPOINT. Can be connected with refrigeration and heating equipment at the same time. One setpoint for heating and one for cooling. Automatic conversion of cooling and heating. Maximum output load 1100W ( 110V)
- BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
- GREAT SENSOR WITH HIGH SENSITIVITY UNDER 1℉ ACCURACY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping, for reducing accumulated temperature error after equipment stopped. The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
- SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
- USEFUL ADDITIONAL FUNCTIONS. Temperature calibration, cooling delayed, over-temperature and sensor fault alarm. To avoid displaying the wrong temperature, refrigerator damaged and temperature exceeded.
6. KETOTEK Digital Temperature ControllerAC 110 220V 10A Thermostat Regulator -50~110C Heating Cooling Control Incubator Relay
7. Quincy Lab 10-140 Steel/Aluminum/Acrylic Door Analog Incubator, 0.7 Cubic feet, 115V, 120W
Feature
- Analog, thermal convection incubator with temperature range from ambient + 2 to 62 degrees C
- Internal capacity of 0.7 cubic feet and comes with one fixed and one adjustable chrome-plated wire shelf for customization
- Bimetal controller with analog temperature knob adjusts temperature, illuminated power switch indicates when the unit is powered on and a heat-cycle light indicates when the heater is cycled on
- Interior constructed of aluminum, exterior of cold-rolled steel that is powder coated in ivory colored paint, and see-through tinted acrylic door for safety and temperature consistency
- Complies with Underwriters Laboratory for the United States (UL) and Canada (C/UL) standards
Description
The Quincy Lab 10-140 incubator is an analog, thermal convection incubator with temperature range from ambient + 2 to 62 degrees C, an internal capacity of 0.7 cubic feet, and a +/- 0.75 degree C stability at 37 degrees C. It comes with one fixed and one adjustable chrome-plated wire shelf for customization. The bimetal temperature controller has an analog temperature knob that adjusts the temperature. An illuminated power switch indicates when the unit is powered on and a heat-cycle light indicates when the heater is cycled on. It has a see-through tinted acrylic door for safety and temperature consistency. This incubator has an interior of aluminum and exterior of cold-rolled steel that is powder coated in ivory colored paint. This unit complies with Underwriters Laboratory for the United States (UL) and Canada (C/UL) standards. This incubator is designed for warming cultures, test kits, eggs, and other biological samples in clinical, industrial, and academic settings.
| Specifications | |
|---|---|
| Temperature range | Ambient + 2 to 62 degrees C |
| Capacity | 0.7 cubic feet |
| Temperature stability | +/- 0.75 degrees C at 37 degrees C |
| Footprint | 12 x 10 inches (W x D) |
| Interior dimensions | 10 x 12 x 10 inches/25.4 x 30.5 x 25.4cm (H x W x D) |
| Exterior dimension | 15 x 13 x 11 inches/38 x 33 x 27.9cm (H x W x D) |
| Shipping weight | 25lbs./11.3kg |
| Power supply | 115V AC, 120W |
| Certifications | UL-listed; C/UL-listed |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Incubators maintain optimal conditions such as temperature and humidity in order to grow and maintain microbiological cultures or cell cultures. They are commonly used for experimental work in biology, microbiology, and molecular biology labs.
Quincy Lab, Inc. manufactures laboratory incubators and ovens. The company, established in 1973, is located in Chicago, IL.
What’s in the Box?
- Quincy Lab 10-140 incubator
- (2) Shelves
- Spirit thermometer
- Instructions
8. Inkbird Thermostat ITC608T Dual Temperature Probe Temperature Controller Pre Wired AC Dual Stage Cooling Heating Outlet 12 Period Timer Stage 120V 15A 1800W 2 Temp Sensors Reptile Incubator Brewing
Feature
- Two temperature probes can be insert into P1 and P2 interface. Temperature senor is waterproof.
- US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃). Max Loading: 120V 15A 1800W.
Description
Description:
Maximum Output Load: 120Vac, 60Hz, 15A, 1800W
Temperature Measurement Range: -40~100°C /-40~212°F
Temperature Display Accuracy: 0.1°C /°F (<100°c f)="">
Display Unit: °C /°F (Temperature)
Ambient Temperature: -20~60°C /-4~140°F
Temperature (Storage Environment): 0~60°C / 32~140°F
Humidity (Storage Environment): 20~80%RH (Unfrozen or condensation state)
Temperature Sensor Cable Length: 2m (78.74 in)
Input Power Cable Length: 1.5m (59.05 in)
Unit Dimension: 20.8 cm x 8.5 cm x 3.5 cm (8.19 x 3.35 x 1.38 in)
Warranty: 2 years
Package Included:
1x ITC-608T Temperature Controller
2x Temperature Sensors
1x Manual
9. Quincy Lab 12-140E Digital Acrylic Door Incubator, 2 Cu. Ft. Capacity, 115V
Description
The versatile Quincy Lab Incubator was custom- developed for laboratories that need a dependable, compact incubator for cultures, test kits, eggs and biologicals. It is ideal for clinical, industrial and school laboratories, for physicians’ offices and as a general-purpose warming cabinet.
10. Quincy Lab 12-140 Acrylic See-Through Door Incubator, Ambient + 2 to 62 Degrees C Temperature Range, 2 Cu. Ft. Capacity, 115V
Feature
- Analog, thermal convection incubator with temperature range from ambient + 2 to 62 degrees C
- Internal capacity of 2.0 cubic feet and comes with one fixed and one adjustable chrome-plated wire shelf for customization
- Bimetal controller with analog temperature knob adjusts temperature, illuminated power switch indicates when the unit is powered on and a heat-cycle light indicates when the heater is cycled on
- Interior constructed of aluminum, exterior of cold-rolled steel that is powder coated in ivory colored paint, and see-through tinted acrylic door for safety and temperature consistency
- Complies with Underwriters Laboratory for the United States (UL) and Canada (C/UL) standards
Description
The Quincy Lab 12-140 incubator is an analog, thermal convection incubator with temperature range from ambient + 2 to 62 degrees C, an internal capacity of 2.0 cubic feet, and a +/- 0.75 degree C stability at 37 degrees C. It comes with one fixed and one adjustable chrome-plated wire shelf for customization. The bimetal temperature controller has an analog temperature knob that adjusts the temperature. An illuminated power switch indicates when the unit is powered on and a heat-cycle light indicates when the heater is cycled on. It has a see-through tinted acrylic door for safety and temperature consistency. This incubator has an interior of aluminum and exterior of cold-rolled steel that is powder coated in ivory colored paint. This unit complies with Underwriters Laboratory for the United States (UL) and Canada (C/UL) standards. This incubator is designed for warming cultures, test kits, eggs, and other biological samples in clinical, industrial, and academic settings.
| Specifications | |
|---|---|
| Temperature range | Ambient + 2 to 62 degrees C |
| Capacity | 2.0 cubic feet |
| Temperature stability | +/- 0.75 degrees C at 37 degrees C |
| Footprint | 18 x 12 inches (W x D) |
| Interior dimensions | 16 x 18 x 12 inches/40.6 x 45.7 x 30.5cm (H x W x D) |
| Exterior dimension | 21 x 19 x 13 inches/53.3 x 48.3 x 33cm (H x W x D) |
| Shipping weight | 40lbs./18.1kg |
| Power supply | 115V AC, 235W |
| Compliances | UL-listed; C/UL-listed |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Incubators maintain optimal conditions such as temperature and humidity in order to grow and maintain microbiological cultures or cell cultures. They are commonly used for experimental work in biology, microbiology, and molecular biology labs.
Quincy Lab, Inc. manufactures laboratory incubators and ovens. The company, established in 1973, is located in Chicago, IL.
What’s in the Box?
- Quincy Lab 12-140 incubator
- (2) Shelves
- Spirit thermometer
- Instructions
Conclusion
By our suggestions above, we hope that you can found Cooling Incubator for you.Please don’t forget to share your experience by comment in this post. Thank you!
