The Best Boat Motors Decals For 1996 25 Hp Evinrude

COMPATIBLE WITH:

ARCO 6241
OMC OUTBOARD MARINE 434495, 434496, 438529, 438531, 5005374, 5005376

UNIT TYPE: OMC OUTBOARD MARINE
VOLTAGE: 12
ROTATION: REVERSIBLE
FIELD HSG OD: 76MM / 2.992IN
OVERALL LENGTH: 103MM / 4.055IN
SHAFT OD: 8MM / 0.315IN
SHAFT NOTES: 2.6MM DRIVE TANG
NEW OR REMANUFACTURED: NEW
APPROXIMATE WEIGHT: 3.09 LBS / 1.40 KG

NOTES:
INCLUDES SHAFT ADAPTER FOR HOLLOW SHAFT APPLICATIONS, 2-WIRE CONFIGURATION, FEMALE SPADE TERMINALS, (4) 7MM UNTHREADED MOUNTING HOLES

APPLICATIONS:
PLEASE VERIFY YOUR OEM PART NUMBER FROM YOUR ORIGINAL UNIT TO HELP ENSURE FITMENT.

EVINRUDE ALL MODELS 115 H.P.
EVINRUDE ALL MODELS 120 H.P. 1991-1994
EVINRUDE ALL MODELS 130 H.P.
EVINRUDE ALL MODELS 140 H.P. 1991-1994
EVINRUDE ALL MODELS 150 H.P.
EVINRUDE ALL MODELS 175 H.P.
EVINRUDE ALL MODELS 200 H.P.
EVINRUDE ALL MODELS 225 H.P.
EVINRUDE ALL MODELS 50 H.P. (3CYL)
EVINRUDE ALL MODELS 60 H.P. (V4)
EVINRUDE ALL MODELS 70 H.P.
EVINRUDE ALL MODELS 90 H.P.
JOHNSON ALL MODELS 115 H.P.
JOHNSON ALL MODELS 120 H.P. 1991-1994
JOHNSON ALL MODELS 130 H.P.
JOHNSON ALL MODELS 140 H.P. 1991-1994
JOHNSON ALL MODELS 150 H.P.
JOHNSON ALL MODELS 175 H.P.
JOHNSON ALL MODELS 200 H.P.
JOHNSON ALL MODELS 225 H.P.
JOHNSON ALL MODELS 50 H.P. (3CYL)
JOHNSON ALL MODELS 60 H.P. (V4)
JOHNSON ALL MODELS 70 H.P.
JOHNSON ALL MODELS 90 H.P.
OMC ALL MODELS 115 H.P.
OMC ALL MODELS 120 H.P. 1991-1994
OMC ALL MODELS 130 H.P.
OMC ALL MODELS 140 H.P. 1991-1994
OMC ALL MODELS 150 H.P.
OMC ALL MODELS 175 H.P.
OMC ALL MODELS 200 H.P.
OMC ALL MODELS 225 H.P.
OMC ALL MODELS 50 H.P. (3CYL)
OMC ALL MODELS 60 H.P. (V4)
OMC ALL MODELS 70 H.P.
OMC ALL MODELS 90 H.P.

Transom Support Plate distributes stress of engine bolts. Cast in high quality aluminum. All plates are 3/8″ thick. Fit top bolt pattern of outboard. Generic plate with no lettering is standard, but custom logos and black painting can be produced with minimum quantities.

The Camco Dual Flow Motor Flusher helps properly maintain your boat’s engine by flushing out contaminates. It allows you to run fresh water through your engine’s cooling system. Simply connect the flusher to a standard garden hose to clear out salt and mineral build-up that could jeopardize your engine’s ability to operate to its fullest capacity. The flusher’s dual input design allows enhanced flow through the engine. Great for boat winterization. It is compatible with most outboards and sterndrives.

The innovative Attwood Heavy Duty Transom Saver helps lessen stress on a boat’s transom when a boat with an outboard motor is being transported on a trailer. This Heavy Duty Transom Saver offers reliable support for the cantilevered engine and comes with a choice of mounts for the end attached to the trailer. The heavy duty head securely holds the engine, while you can use your choice of the roller bracket or trailer mount bracket at the trailer end. The Transom Saver is adjustable from 32 to 44 inches for the best fit and fullest support. This Transom Saver features durable, rugged construction, and the rubber pads on the heavy duty head are replaceable. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

Panther Safe-Skeg’s provide the ultimate stainless steel skeg protection. Whether you are looking to protect your new skeg, repair your damaged one or even just add some shine, the Safe-Skeg is made of 316 Marine Grade Stainless Steel Construction and installs in minutes. The included Install Kit includes: mounting hardware, instructions, allen wrench and Loctite 262. Fits the following engines: Force 70-90 HP 2-stroke (1998-2002), Honda 75-90-115 HP 4-stroke (1995-2007), Mercury/Mariner 50-60 HP [Bigfoot] 2 and 4-stroke (2003-present). Mercury/Mariner 70-75-80 HP 2-stroke (1984-present), Mercury/Mariner 70-90-100-115-125 HP Optimax 2-stroke (1983-present), Nissan/Tohatsu 70-90-115-120-140 HP 2-stroke (1993-present), Yamaha 60-70-80-90-100 HP 2 and 4–stroke (1998-2001).

As a leader in stainless steel and aluminum propellers and impellers, SOLAS propellers are the most reliable and durable on the market. to have a match for almost every customer, Propeller Depot is proud to have Solas as a manufacturer. Propeller Depot carries the entire line of aluminum and stainless SOLAS propellers, and ships them to over 120 countries. Following recent outboard technology advancements, choosing the perfect propeller has become a primary concern for all boat owners. The propeller manufacturers around the world are working hard to develop propellers and blade systems that are effective in performance and affordable. One major manufacturer in the propeller production is SOLAS. They have a wide range of fresh propellers for 3-blade and 4-blade engine systems. Their options are what you need to meet your horsepower engine needs, especially if your device is a 4-stroke.

About Vinyl Decals: These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window. Vinyl Decals come in 3 pieces: 1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied) 2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing) 3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied) Application Tips: 1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 60°F & 90°F. 2. Do not touch the adhesive backing, oils from your skin will prevent sticking. 3. Before applying decal make sure there is no wax or oily products on the surface Application Instructions: 1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker. 2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces. 3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape 4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 5. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface. 6. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape. 7. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.