Top 10 Black And Decker Oscillating Multi Tool

Product Description

Highlights: 2.0 Amp – VS Tool free release lever eliminates the need for a hex key Variable speed dial has six speed settings Includes rigid scraper, 1 in wood/metal blade, 12 sandpaper sheets, sanding base and carrying bag Specifications: 120 voltage, 10,000-20,000 rpm, AC power source and 1.4 degrees oscillating angle

From the Manufacturer

The Black & Decker BD200MTB 2.0 AMP Variable Speed Oscillating Multi-Tool has a tool free blade release that makes accessory changes quick and easy and the quick release lever eliminates the need for a hex key. With 13 available accessories, the range of possible applications is virtually unlimited. It has a variable speed dial that has six speed settings (10,000-20,000 OPM) to deliver the precision performance that is right for each job. The class leading 2.0 AMP motor powers through the toughest applications and it has comfort grips to provide better handling and control for optimal results. Kit includes: BD200MT Oscillating Multi-Tool, Storage Bag, 1 Wood/Metal Blade, 1 Rigid Scraper Blade, 1 Sanding Base, 12 Sheets Assorted Sandpaper, and a Quick start guide.

GALAX PRO-A team specializing in the production of power tools, such as circular saw, mini circular saw, reciprocating saw and so on. If you are a DIY lover, GALAX PRO is your right choice.

Oscillating tools are extremely versatile, with countless attachments for a variety of tasks including cutting, sanding and scraping. It is a versatile tool for home repair, remodeling, and restoration

Making plunge cuts
  Attach a plunge cutting blade, and use it to make cutouts in plasterboard, plywood or weatherboard, or for cutting out damaged sections of wall.

Undercutting door jambs
  When installing floating floors, you’ll often need to trim the base of the doorjambs. Use a segment blade to trim the doorjamb, positioning a flooring offcut underneath the blade to align it at the correct height.

Slicing through fasteners
  When replacing weatherboards or trim, you may encounter nails or screws that are impossible to remove. Slide a metal cutting blade behind the trim and cut them loose, protecting the wall surface with a sheet metal offcut.

Scraping away glue
  With a scraper attachment, an oscillating tool can be used to remove dried adhesives from hard surfaces, like concrete garage floors. You can also use it to remove silicone sealant, or to scrape away small concrete splashes after a masonry job.

Specification:
Voltage：120V AC
No Load Speed：22000rpm
Oscillating Angle:3°
Change Blade: Using Allen key
Weight: 940g(2.1lbs)
Product Dimensions:265*90*50mm/10.6*3.5*2.0inch

Package Contents:
GALAX PRO Oscillating Multi Tool* 1pc
Scraper Blade * 1pc
Wood/Plastic Plunge Blade * 1pc
Wood/Soft Metal Saw Blade * 1pc
Wood/Plastic Half Circle Saw Blade * 1pc
Sandpaper Base * 1pc
Sanding Paper: 60 grit *3pcs/120 grit *3pcs
User Manual *1
Warranty Card *1

Features and Benefits: Powerful 3.0 Amp Motor provides strong performance for cutting and sanding QUICK-CHANGE™ Accessory System allows blades and attachments to be changed quickly without wrenches DUAL-GRIP Variable Speed Trigger gives users ultimate speed and application control Bright LED Light illuminates dark work surfaces for accurate cutting DEWALT Oscillating Tool Guide System allows users to set the depth or height for accurate repeatability Kit includes: DEWALT Oscillating Tool Guide System, Wood with nails blade, fast-cut wood blade, semi-circle blade, sanding pad, (25) sheets of sand paper, accessory storage box, multi-brand accessory adaptor, contractor bag.

The BLACK+DECKER BDCMTO Matrix Oscillating Tool Attachment provides variable speed that allows for precision performance that’s right for each job. Its tool-free blade release makes accessory changes quick and easy – the quick release lever eliminates the need for a hex key. This oscillating tool attachment can be used with any tool in the BLACK+DECKER Matrix line including the BDEDMT and BDCDMT112.

Product Description

Use the Genesis Power Tools Multipurpose Oscillating Tool as a detail sander, close-quarters saw, power scraper, or grout removal tool. It is a versatile tool for home repair, remodeling, and restoration. It features a 1.5 Amp motor that delivers 21,000 oscillations per minute, and it has a sturdy die-cast aluminum gear housing. The 4-pin flange holds accessories firmly in place. This tool is great for trimming door jambs for flooring installation, removing old caulking, glue or paint, taking up vinyl flooring or carpeting, chiseling out door hinges, or trimming cabinets for installation.

Amazon.com

Designed for home remodelers and do-it-yourselfers, the Genesis GMT15A Multifunction Oscillating Tool is an all-in-one solution that deftly handles cutting, sanding, scraping, and grinding. Thanks to its unique oscillating head and multiple attachments, the GMT15A quickly and easily tackles projects that once required long hours and expensive specialty tools. Whether you need a detail sander, close-quarters saw, drywall cut-out tool, power scraper, or grout remover, the Genesis GMT15A is the ideal tool for the job.

GMT15A Multi-Purpose Oscillating Tool At a Glance: Multi-purpose tool for home repair and remodeling; attachments included for cutting, scraping, and sanding 21,000 oscillations per minute; 1.5 amps Four-pin flange holds accessories firmly in place Die-cast aluminum gear housing for increased life Two-year warranty; customer service and technical support included

A versatile power tool for home repair and remodeling. View larger.

Attachments for a Variety of Projects

Unlike traditional power saws, the Genesis GMT15A Multifunction Oscillating Tool employs a 30-millimeter flush cutting saw blade to make precise cuts along edges and in tight corners. You’ll marvel at how easy it is to trim narrow door jambs or base molding.

To make cut-outs in wood, plastic, or drywall, you’ll want to use the 3-inch flat saw blade. The rigid scraper blade makes pulling up old vinyl flooring or carpeting no problem. The scraper also comes in handy for chipping away at stubborn paint layers.

The Genesis GMT15A can also be utilized as a detail sander. Just attach the hook-and-loop sanding pad and sandpaper for dry sanding of wood, plastic, or metal surfaces. For additional options, a grout blade or flexible scraper blade can be attached (not included).

Lightweight and Powerful
Weighing less than four pounds, this lightweight tool is constructed using die-cast aluminum gear housing, which improves dissipation of heat and increases service life. A four-pin flange design holds accessories firmly in place to guarantee safety. And with speeds of up to 21,000 oscillations per minute, projects can be completed more efficiently.

UL listed, the Genesis GMT15A is rated at 1.5 amps and 120 volts for safe, reliable operation. It is backed by a two-year warranty, which includes complimentary toll-free customer service and technical support. The GMT15A should be used only with Genesis oscillating tool accessories.

What’s in the Box
Genesis GMT15A Multifunction Oscillating Tool; 3-inch Hook-and-Loop Sanding Pad; Sandpaper; Rigid Scraper Blade; 30mm Flush Cut Blade; 3-inch Wood and Drywall Blade; and Allen Wrench.

See all Product description

The BLACK+DECKER BDCK502C1 GoPak 4-Tool Combo Kit features all the right tools for your on-the-go DIY took kit. The BCD701 Drill/Driver Drill features an 11-position clutch which prevents stripping of screws and damaging materials, along with an LED work light to help illuminate your work surface. The BCS601 Jigsaw offers tool-free blade release for quick and easy blade changes, with built in blade storage on the jigsaw for your convenience. This kit also includes a BCW201 Detail Sander that has a 3.5″ triangle platen on the sander to access corners and tight spaces. Finally, the BCL101 LED Light features a 90-degree rotating head on this LED Flashlight to access hard to reach angles. These are all powered by the BCB001 2-in-1 GoPak Battery, which can power both your tools and your mobile devices; it has a 2.4A USB port output that provides fast rate charging to phones, tablets and other USB devices. The battery has 4 LED lights which visibly provides the battery state of charge, and is compact and lightweight for on-the-go portability. Backed by BLACK+DECKER’S 2 year limited warranty. Includes: 1) BCB701 Drill/Driver, 1) BCS601 Jigsaw, 1) BCW201 Detail Sander, 1) BCL101 LED Light, 1) BCB001 GoPak Battery, 1) microUSB Charging Cable, 1) Double ended driver bit, 1) Jigsaw blade, 3) Sandpaper sheets.

Black + Decker BDCMTHPI MATRIX Inflator Multi-Tool Attachment is a high-pressure inflator attachment that easily inflates car tires, sports balls, bike tires, and more. This inflator offers up to 100 psi (Peak) / 80 (Continous) psi. Includes convenient on-board accessory storage and 14-inch hose. Also includes 1) Beach ball nozzle, and 1) Needle nozzle.

The BLACK+DECKER BDCR20B 20v MAX Lithium Bare Reciprocating Saw features tool-free blade changing. It also has a variable speed trigger and a pivoting shoe for ease of use. The maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. This recap saw offers 0-3,000 strokes/minute and a stroke length of 7/8″. This is a bare-tool item – battery sold separately (not included). Standard equipment included: (1) BDCR20 20v Max Lithium Reciprocating Saw and (1) Reciprocating Blade.The tool is equipped with a switch lock-off feature to prevent unintentional operation.To switch the tool on, press the lock off button. then squeeze the on/off switch. Releasing the trigger turns the motor OFF. This tool has no provision to lock the switch in the ON position, never be locked in the ON position by any and should other means. Troubleshoot-unit shuts off abruptly. Battery pack has reached its maximum thermal limit. Allow battery pack to cool down. Battery pack will not charge Surrounding air temperature too hot or too cold. Move charger and battery pack to a surrounding air temperature of above 40 degree fahrenheit or below 105 degree fahrenheit Included Components: BDCR20 20V MAX* Lithium Reciprocating Saw, (1) Reciprocating Saw Blade; Stroke Length: 7/8 in

The BLACK+DECKER BDCR20C 20V MAX* Reciprocating Saw with Battery and Charger is versatile, lightweight, and easy to use. It features a powerful 3000 SPM motor with a variable speed trigger and electric brake to enhance control. Tool-free blade changes and an adjustable pivoting shoe add convenience and ease of use. The maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts. This recap saw offers 0-3,000 strokes/minute and a stroke length of 7/8″. *Part of BLACK+DECKER 20V MAX* System. Backed by BLACK+DECKER’s 2 year limited warranty. Includes: (1) BDCR20 20V Max* Lithium Reciprocating Saw, (1) Reciprocating Blade, (1) 20V Max* Lithium Battery and Charger.