712 reviews analysed
1. MICTUNING LED Push Button Switch with Connector Wire Kit for Toyota – Red Laser LED LIGHT BAR Symbol
Feature
- PERFCT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck
- HIGH QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life (This one is Red. Blue,White & Green avaiable)
- STURDY DURABILITY – Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.54″ x 0.83″
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install
- WIDE APPLICATION – This model fits on LATE model Toyota’s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. A SMALLER MODEL available which fits some other LATEST Toyota vehicles, Sequoia 2008-2014, Highlander 2008-2014, Tacoma 2012-2014 Center ONLY, Tundra 2007-2014, RAV4 2008-2012, 4Runner 2010-2014, Prado 150 Series 2010-2014, Land Cruiser 200 Series 2008-2013, Corolla 2006-2013, Camry 2011-2014 etc. If you need a smaller model, please send us
Description
MICTUNING Customized Laser Etched Symbol LED Backlit Push Button ON/OFF Switch
This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.54″ x 0.83″ and all symbols are Laser Etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
COMPATIBLE VEHICLES:
# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009
2. Interior Car Lights, Govee Car LED Strip Light Upgrade Two-Line Design Waterproof 4pcs 48 LED APP Controller Lighting Kits, Multi DIY Color Music Under Dash Car Lighting with Car Charger, DC 12V
Feature
- ➤Upgraded Two-Line Design – Longer wires, suitable for any model cars. The lights tape’s back come with strong 3M adhesive, two lines connect with four strip lights, no need assemble the strip light, more easy to install and hide, keep your car clean and tidy. This cigarette lighter plug has switch and indicator light, built-in fuse, effectively protect the vehicle lights.
- ➤Two Simple Control Methods – Forget the remote what easy to lose, we provide a more convenient and fashion controller, enjoy to change the color, brightness, music mode. And you can stick the controller on the nearby next you for safety drive. What’s more, you can use the “Govee Home” APP to control the light.
- ➤Music Sensor – Built-in high sensitivity mic, spectrum with light and colors adjusting automatically base on the ambient sound, and then the led lights will change their colors following the music rhythm, increase safety of driving in daytime and nighttime.
- ➤Multi-Colors – Come with RGB car LED strip, Infinitely DIY colors over 16 million colors and different tones for selection, you can customize your own unique color modes to perfect enhancement for upgrading your car.
- ➤Safe to Use – Car LED light strip has a working voltage of 12V and powered by car charger are equipped with short circuit protection and memory function. Waterproof, extremely low-heat, touchable and safety for children.
3. LED Light Push Button Switch with Connector Wire Blue Backlit Kit for Toyota Tundra Tacoma 4Runner-Rear Light Symbol
Feature
- Fitment: This Rear Light Push Switch fit Toyota Tacoma Tundra 4Runner Highlander Sequoia RAV4.
- Sturdy Material: The push switch made of ABS high strength plastic, long service time.
- Easy Install:must be wired through a fused relay,Direct fit your car board dash.
- Feature:surface size: 1.28in x0.87in
- Black finish, blue laser image. Voltage: 3Amp 12V.
- Easy Install: Direct Replace OEM switch, must be wired through a fused relay.
Description
Feature:
* Surface Size: 1.28in x0.87in;
* Voltage: 3Amp 12V;
* Material: ABS plastic;
* Blue Backlift laser feature;
* Direct Replace OEM switch;
* Easy Install: must be wired through a fused relay.
Fitment List:
*Toyota Sequoia 2008-2019
*Toyota Highlander 2008-2019
*Toyota Tacoma 2012-2019 Center ONLY
*Toyota Tundra 2008-2019
*Toyota 4Runner 2010-2019
*Toyota RAV4 2008-2012
*Toyota Yaris 2008
Package Include:
1* Push Switch
1*install instruction
4. WOWTOU Emergency Light Blue White, 16 Flashing Modes 12W Bright LED Strobe Lighting for Volunteer Firefighter Vehicle Dash Deck Windshield
Feature
- High intensity ABS housing with angle adjustable design prevents from flash back to driver
- With 12 x1W high-power LED as light source, high brightness and wide beam angle
- This blue clear courtesy light is for 12V DC use only, easy to mount at windshield or deck with 5 suction cups, plug into and play
- 16 modes lighting changing with last setting recall memory function
- Widely used for Hazards Warning, Law Enforcement, EMS, First Responder, Volunteer Firefighter
- 18 months warranty and 30 day money back guarantee with timely customer service
Description
Pre-purchase Notification:
All our reviews are real left by our customers; we do not pay for 5 star reviews. Either positive or negative are welcome and we will continuously improve our product according to your reviews.
WOWTOU brand products have been well tested before delivery, but we cannot 100% guarantee the items when delivered to you. Any problem please feel free to contact us through Amazon Email System and we will do our best to serve you. 30-day money-back guarantee.
Specifications:
LED Light source : 6 X 1W Blue LEDs + 6 X 1W White LEDs
Lighting color: blue & white
Operating voltage: DC 12V only
Power: 12W
Lighting modes: 16 Flashing patterns selectable
Housing material: ABS housing(light); aluminum housing(bracket)
Housing color: black
Recommended mounting location: Interior dash deck windshield
Lifespan: 30000 hours
Surface temperature(Max): < 40℃="" (testing="" at="" 25℃)="">
Operating temperature: -30 to +65℃
Dimension(with bracket): 326 x 102 x 35 mm (L x W x H) / 12.8 x 4 x 1 inch (L x W x H)
Weight(with bracket): 274g /9.7oz
Installation
Put the suction cups in the hole of the bracket
Mount to the right place of your vehicle.
Plug into the 12 volt cigarette lighter adapter and turn-on power
Click the switch button to change flash modes
What s in the box
1 x LED strobe light with cigarette lighter plug
1 x Mounting bracket
5 x Suction cup
2 x Screws
5. Interior Car Lights, 4pcs 48 USB Car LED Strip Lights, MultiColor Music LED Interior Light Under Dash Lighting Kit with Sound Active Function and Wireless Remote Controller, DC 5V
Feature
- MUL-FUNCTIONAL – 4pcs 48 LEDs (1pc 12 LEDs), 12 LEDs/ Light, Voltage: DC 5V. Wattage: 10W. Four-Line design led lights for car interior, easier to hide and keep your car clean and tidy, not only suitable for car decoration, but also tv bias lighting, home, KTV, party decortaion with USB port.
- 5050 RGB & MUSIC SENSOR – come with 8 colors 5050 RGB car LED strip, you can change the LED color and adjust the brightness as you wish with the wireless remote control. And the Sound-activated Function allows you to enjoy the fun with the color changing following your car stereo music rhythm as well as your voice.
- EASY TO INSTALL – First plugged into USB port, then peel the back double-sided tape, paste the light strips on the car floor. Plug and play with the wireless IR remote control. Pls notice that: 1. The remote control should point directly to the black receiver box and there is no obstacle between them. 2. The remote should be put near to the receiver box, not too far.
- SAFE TO USE – Car LED light strip has a working voltage of 5V and powered by USB are equipped with short circuit protection. Waterproof IP44, extremely low-heat, touchable and safety for children.CE/ROHS/FCC/UL/PSE certificated.
Description
Color:multicolor-usb
Enjoy Your Colorful Life, Just Start From the 4Pcs 48 LED Car Interior Atmosphere Decorative Light.
Four-Line design led lights for car interior, easier to hide and keep your car clean and tidy, not only suitable for car decoration,
but also tv bias lighting, home, KTV, party decortaion with USB port.
Features:
High quality PVC Material,flexible, waterproof, anti-corrosion，anti-collision, come with 8 colors 5050 RGB car LED strip, you can change the LED color and adjust the brightness as you wish with the wireless remote control.
And the Sound-activated Function allows you to enjoy the fun with the color changing following your car stereo music rhythm as well as your voice.
8 Monochrome Modes: Red, Green, Blue, White, Orange, Yellow, Cyan, Purple, and Brightness Control
4 Automatic Change Modes: 2 jump mode control, 2 fade mode control
4 Music Sensor Modes
Specification:
Material: High quality PVC
Light Color: RGB
LED type: 5050 SMD
DC: 5V
Light Bar: 22.5 x 1.4 x 0.9cm (8.85 x 0.55 x 0.36 inch)
Light Strip Wire Length: 2 x 130cm(51.1 inch) + 2 x 180cm(70.9 inch)
USB Port Wire Length: 100cm(39.3 inch)
Remote distance: 16.4ft
Certification: CE/ROHS/FCC/UL/PSE
NOTE:
1. Please remove the battery cover before using the remote
2. The remote control should point directly to the black receiver box and there is no obstacle between them.
3. The remote should be put near to the receiver box, not too far.
4.Please clean the surface of where you will install the Car LED Strip Lights.
5. Please DON’T HIDE the Infrared Receiver, but show it up, so it could receive the signal from the Remote Controller. Please aim at the Infrared Receiver when use the Remote Controller.
6. 12V Car Auto Vehicle MotorBoat Battery Electromagnetic Disconnect Switch, DC 12V Electromechanical Solenoid Power Switch + One Button Dash Control Master Kill System Turn on/off No Open The Front Hood
Feature
- This is a More Convenient Car/Vehicle/Boat Battery Disconnector Switch System that can master kill your car power system to prevent the old car power drain. Extend your car battery life by 2-3 times.
- Comparing to tranditional mechanical battery switch, this Electromagnetic Switch allows you to move the trigger from under the hood to your dashboard, so that you won’t need to open the hood to turn on power every time
- One button control on your dash for the whole car power system , easy operation. Universal for 12V Car Power System, unique from Linko-Tech Amazon Store.
- Package Includes: 1 x Electromagnetic Car Battery Switch, 1 x Dashboard Button. The installation need additional power wires (Larger than 24AWG) to connect into the whole system.
- The instructional diagram is in item photos, please refer to it when installation. Installation need additional wires larger than 22AWG. Max Current: 1000A, Rated Current: 100A, Rated Voltage: DC 12V, Working Voltage: DC 5-15V, Lifetime of Use: 100,000 Times.
Description
Feartures:
1. Move the battery master kill switch from under the hood to your dashboard, so that you won’t need to open the hood to turn on power every time
2. One button control on your dash for the whole car power system , easy operation
3. Universal for 12V Car Power System, unique from Linko-Tech Amazon Store
Parameters:
Max Current: 1000A
Rated Current: 100A
Rated Voltage: DC 12V
Working Voltage: DC 5-15V
Lifetime of Use: 100,000 Times
7. 12V Car Truck Emergency Strobe Flash Light Sucker Dashboard Interior Windshield Warning Light Bar Current (12LED, Amber White Amber White)
Feature
- HIGH BRIGHTNESS–With 12 x1W high-power LED as light source,very bright even in the daytime.
- 15 DIFFERENT PATTERNS:—There are 15 different flashing strobe patterns,Last pattern recall/memory function.
- EASY INSTALLATION:–Easy to mount with 4 suction cups and plug into a 12V cigarette lighter.
- SERVICE—14 days no reason to return,180 days warranty .If it is defective,please contact with us directly.
- Widely used for Hazards Warning, EMS, Law Enforcement, First Responder, Tow and Rescue, Firefighter, Construction to be visible on the job.
Description
It is the high brightness LED emergency strobe light,with 12 x1W high-power LED as light source,very bright even in the daytime.There are 15 different flashing strobe patterns,memorizes the last pattern use.Easy to mount with 4 suction cups and plug into a 12V cigarette lighter.Widely used for Hazards Warning, EMS, Law Enforcement, First Responder, Tow and Rescue, Firefighter, Construction to be visible on the job.
SERVICE—14 days no reason to return,180 days warranty .If it is defective,please contact with us directly.
Specifications:
Unit has a total of 12 LEDs
Wattage: 12W
Voltage: DC 12V
Number of flash modes: 15
Life:Over 50000 hours
Dimensions: 13.8″ x 4.3″ x 1.6″
Item Weight:14.1 ounces
8. Core Tools CT126-LS-B Black Push Button Waterproof Switch
Feature
- Perfect for Automotive, Motorcycle, ATV, or UTV electrical applications like lighting and accessories, this Push On, Push Off SPST switch also works great for most DC electrical projects
- Waterproof Push Button Switch with Black Rubber Boot features 18 AWG 4.50 inch wire leads with 0.25 inch stripped end lengths
- Constructed with high quality copper switch contacts and is rated for up to a 10 amp usage
- Designed to mount in a 3/8 inch hole, allowing for a clean, professional look
- Ideal for adding lights on a separate circuit from your stock lights, adding LED lighting, auxiliary spotlights, or switching a relay in higher power applications
9. Car LED Strip Light, EJ’s SUPER CAR 4pcs 36 LED Car Interior Lights Under Dash Lighting Waterproof Kit,Atmosphere Neon Lights Strip for Car,DC 12V(Blue)…
Feature
- ????Perfect and safe for Car LED Strip Light! Good indoor lights not just light up your car, Soft light also provide the comfortable driving experience to dirver, so the drive at night is not only safe, but also more comfortable.
- ????Easy to install and hide,keep your car clean and tidy. This cigarette lighter plug has switch and indicator light, built-in fuse, effectively protect the vehicle lights. Suitable for any model cars.All you need is a cigarette lighter connector inside the car.
- ????Universal fit for cars with DC 12V power source. The Car LED Strip Light contains four LED light bars,car LED light fixed in pink which are easy to install in your car to improve and freshen the interior atmosphere.
- ????Installation is easy with the 3M double-sided tape the the back of each LED strip makes for a secure install. No need to modify the wiring,simply peel off the tape cover on each LED strip and apply under the seats or in the footwell area.(please clean the installation area before installation).
- ????Safe to Use : Car LED light strip has a working voltage of 12V and powered by car charger are equipped with short circuit protection and memory function. IP65 waterproof, extremely low-heat, touchable and safety for children.
Description
LED Car Interior Atmosphere Decorative Light is the high quality?super bright LED light bulbs, and it’s producing intense light over a large area. Clean & stylish LED lights, enhanced the outline, make your car stands out in the crowd.
Features:
High quality RGB LED strip lights, PVC Rubber Material, waterproof, anti-collision, anti-corrosion.
Application: Using for lighting up the entire car interior, Very simple installation,plug and play.
An easy way to install it in your car, no need to modify the wiring,simply peel off the double-sided tape behind each strip and apply the LED strips under the seats or in the footwell area.
Specification:
Material: High quality PVC Rubber
Color：Blue
Voltage: DC 12V
Light Color: RGB
Power: 10W
LED Type: 5050 SMD
Lights Quantity: 4 Pcs / 36 LED
Life: 10,0000 hours
Cigarette Lighter Wire Length: 45cm(17.7 inch)
Light Strip Wire Length: 2 x 120cm(47.2 inch) + 2 x 170cm(66.9 inch)
Package: 4 x SMD5050 Car LED Lights Strip; 1x Car Cigarette Lighter
NOTE:
1. Please note the direction when connecting the strip light to the car charger.
2.Hide the excess wire along the footpad underneath, without any trace, reduce the messy wire, more beautiful!
3. The surface should be clean before using the 3m sticker.
10. Ai FMK578 2000-07 Ford Taurus/Mercury Sable Dash Kit,BLACK
Description
Only the finest raw materials and state-of-art technologies are used to produce these vital mounting and cosmetic solutions that render a vehicle dashboard into an attractive showplace of pride and profits for your business. For something so vital, trust nothing less than American International Installer Preferred custom mounting kits. They pioneered the car stereo installation business, and over 60 years of experience continues to teach them that their innovation today, drives your business and their industry forward into the future. Installers and business professionals continue to rely upon the innovative and quality products that can only be achieved from within their Camarillo, California facilities where American International kits are produced to a precise quality standard that surpasses the OEM. AI only use the finest raw materials and state-of-the-art technologies to create mounting and cosmetic solutions that render a vehicle dashboard into an attractive showplace of pride for your craft, and the primary profit center for your business.
Conclusion
By our suggestions above, we hope that you can found Push Button Light For Dash for you.Please don’t forget to share your experience by comment in this post. Thank you!
