The Best Metra Double Din Dash Kit 03 Jeep Tj

Double DIN Installation Dash Kit for select 2007-up Chrysler, Dodge, and Jeep Vehicles. Kit Includes: Radio Housing Brackets. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Single DIN Installation Dash Kit with Pocket for Select 1974-up Chrysler, Dodge, Eagle, Jeep, Plymouth. Kit Includes: Radio Mounting Panel, Radio Housing Trim Plate, & Radio Housing Brackets. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Please email us to have installation instructions sent with your dash kit.

Speaker Harness for Select GM Vehicles

Professional Installer Series Turbo Kit Offers Iso Din And Din. Contoured And Textured To Match Factory Dashboard. All Necessary Hardware Included For Easy Installation. Metra Patented Quick Release Snap In Iso Mount System. Contoured And Textured To Match Factory Dash. Includes Parts For Installation Of Double Din Radios Or Two Single Din Radios.

Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Double din Radio- Dash kit has a black finish- Wire harness and antenna adapter plugs into vehicle’s connections. Very Important: Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features like steering audio controls, rear DVD audio, etc- extra adapters required. Some off-brand radios might not be true Double Din Spec (slightly oversized/undersized) which means this kit will need to be modified or sanded down. Compatible with: Chrysler: 2011-2014 200, 2008-2010 300, 2008 – 2009 Aspen, 2007 – 2010 Sebring, 2008 – 2016 Town and Country; Dodge: 2007 – 2014 Avenger, 2009 – 2012 Caliber, 2008 – 2014 Challenger, 2008 – 2010 Charger, 2008 – 2011 Dakota, 2008 – 2009 Durango, 2008 – 2016 Grand Caravan, 2009 – 2010 Journey, 2008-2009 Magnum, 2006 – 2011 Nitro, 2009 – 2011 Ram 1500, 2010-2011 Ram 2500 / 3500; Jeep: 2008-2010 Commander, 2009 2010 2011 2012 2013 2014 2015 2016 Compass, 2008 – 2010 Grand Cherokee, 2008 – 2013 Liberty, 2009 – 2016 Patriot, 2007 – 2016 Wrangler, 2008 – 2009 Mitsubishi Raider, 2009 – 2013 Volkswagen Routan

Single din install dash kit for select 1992-up Chevrolet, Cadillac and olds mobile vehicles. Kit includes: radio housing, radio housing trim plate, & radio housing brackets. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Single DIN Stereo Dash Kit by Metra. With Trim Plate. Install any single-DIN custom stereo you want in your dash with the help of this premium quality kit. Designed to provide a factory look when complete, the product will match the factory dash contours

Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Single din Radio- Dash kit has a black finish- Wire harness and antenna adapter plugs into vehicle’s connections. Very Important: Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features like steering audio controls, rear DVD audio, etc- extra adapters required. Compatible with: Chrysler: 2011 – 2014 200, 2008 – 2010 300, 2008 – 2009 Aspen, 2007 – 2010 Sebring, 2008 – 2016 Town and Country; Dodge: 2007 – 2014 Avenger, 2009 – 2012 Caliber, 2008 – 2014 Challenger, 2008 – 2010 Charger, 2008 – 2011 Dakota, 2008 – 2009 Durango, 2008 – 2016 Grand Caravan, 2009 – 2010 Journey, 2008-2009 Magnum, 2006 – 2011 Nitro, 2009 – 2011 Ram 1500, 2010-2011 Ram 2500 / 3500; Jeep: 2008 – 2010 Commander, 2009 2010 2011 2012 2013 2014 2015 2016 Compass, 2008 – 2010 Grand Cherokee, 2008 – 2013 Liberty, 2009 – 2016 Patriot, 2007 – 2016 Wrangler, 2008 – 2009 Mitsubishi Raider, 2009 – 2013 Volkswagen Routan