668 reviews analysed
1. Majestic Athletic 1111 Pilot Assembly NG Replacement Part by Majestic Fireplaces, Black
Description
Majestic 10002264 Pilot Assembly NG Fireplace Replacement Part
2. Propane Gas – Majestic 10002265 OEM Replacement 3 Way Pilot Assembly for Propane Gas Fireplaces
Description
Replacement SIT 3-Way Pilot – LP for Majestic, Temco, and Vermont Castings Gas Stoves. Fits the following models: Majestic Gas Stoves: 33BDVR 33BDVT 33LDVR 33LDVT 360DVS2 360DVS2RNMH 360DVS3 360DVSL 360DVSR 36BDVR 36BDVT 39BDVT 43BDVR 43BDVT 43LDVR 43LDVT DV360 DV580 DVB4136 DVHVAC36 DVR33 DVR36 DVR39 DVRT36 DVRT39 DVRT41 DVRT43 DVRTSB DVRTSB DVT36 DVT39 DVT43 NV360 NVBC36 NVBC42 NVBR36 NVC36 NVC39 NVC43 NVSTR36 ODGR400 ODGR500 ODGSR36A ODGSR42A RDV4136 RFSDV22 RFSDV32 RFSDV32RMH RFSDV34RF RFSDV42 RHEDV25 RHEDV32 RHEDV42 Vermont Castings Gas Stoves: 33XDV 36XDV 39XDV Brookhaven 20DVT LHEC20 LHEC30 LHECDV20 LHECDV30 LHER20 LHER30 LHERDV20 LHERDV30 Oxford DV and NV OXDV30 Pinnacle DV Rear Vent Radiance RADVT/ RADVTCS Radiance RADVT/RADVTC Radiance RDVOD Radiance RNVOD RFSDV24 Stardance DV (3900-3916/ 3940-3956) Stardance Natural Vent SNV30 Stardance Rear Vent SDDVR/ SDDVRC Stardance SDDVT SDDVTCS Stardance SDDVT/ SDDVTC Stardance SDV30 Rear Vent Stardance SDV30 Top Vent Stardance DV25 Dutchwest Gas Stoves: 2465 2466 NV 2467 NV 2468 Monessen Gas Stoves: RFSDV34TSR RFSDV24SR Century Gas Stoves: Jefferson Direct Vent Temco Gas Stoves: GFPN41 Majestic part # SRV10002265 Replaces old part number 10002265 OEM Majestic Part May fit other models as well. Please check your owners manual for part numbers.
3. MENSI 24" Propane BBQ Grill, Firepit, Fireplace Heater Universal Gas Thermocoupler Sensor M8x1 Thread
Feature
- The Universal Thermocouple Total Length 24″
- Head thread size: M8*1, End Nut size to connect valve: M8*1
- Head Need to Be Keep Heated During Using ( If Stops working, Please adjust the Tip Location again)
- Volatge: ＞20mV, Open valve time less than 10s
- Used for gas fireplace, fire pit, grill, Stove, catering cooker, patio heaters etc
Description
*The thermocouple is an univesal thermocouple with M8x1 head and end.
*It can be used on Gas stove, grill, fire pit and fireplace, furnace etc.
*Easily install.
* CSA approved.
*Length 24inches.
*Copper Thickness 0.3mm.
*Head thread:M8X1.
Operation Instructions
1). install the thermocouple tip on a board and use two nuts to fix it’s location
2). Keep the tip at around 5mm distance from the burner hole in right height.
3). Faston the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)
4). Open gas and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it works properly
If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connect with valve
4. Real Fyre PT-1 Pilot Thermocouple for Natural Gas (NG) G45 and G46 Burner Applications
Description
Real Fyre Pilot Thermocoupler For Natural Gas G45 and G46 Burner Applications.
5. 750mv Thermocouple for Heat Glo Heatilator,Fireplace Thermopile Replacement Fireplace&Stove Accessories for Fire Gas Stoves Heat&Glo Gas Stoves Oven Water Heater&Frying Furnace (36", Aluminum)
Feature
- REPLACEMENT FIREPLACE THERMOPILE-compatible with the majority of units. For example water heater, Oven, Fireplace & Stove etc..
- SAFETY& ENERGY SAVINGS-0.4 x 0.3 x 0.1 inches
- Lengths: 24/36 inches. 2 Size for you to choose. Wire Material: glass fiber wrapping line, metal aluminum envelope, these two lines are high temperature resistance fire line, you can choose according to their own needs, focus on length. Our parts are designed and tested for exact equipment specifications, so they work more efficiently and can result in energy savings over time. A small difference will have huge consequences.Just buy our Thermocoupl
- EXTREMELY DURABLE-Internal resistance (25℃), varies with specifications and length between 1,500 mΩ and 4,500 mΩ. Normal working temperature 700-750℃
- AFTERMARKET REPLACEMENT PART-The Thermocouple is the device that monitors the fire after start-up
- EASY INSTALLATION-Spiral type and two-pole plug-in type, Installs quickly and easily tool-less attachment to propane tanks and cylinders.
Description
Product Specification:
Lengths: 24/36 inches
Wire Material: glass fiber wrapping line, metal aluminum wrapping Line
Connecting type: spiral type and two-pole plug-in type
Working temperature:700-750°C.
Beginning with the goal to offer simple and reliable pieces of home machinery for professional frying, Meter Star has designed equipment that makes it easier for our customers to offer the best at home.
750mv Thermocouples have long been used in self-powered heaters and hot water equipment. It has been proven in millions of appliances as the contractor’s preferred thermopile and are found in many of today’s gas fireplaces.
The Thermocouple is suitable for the following models product. You can take it for reference.
For Models:
QV32 QV32-A QV32B QV32B-A (Pre Serial # 0021080519)
QV36 QV36-A QV36B-A (Pre Serial # 0021076968)
QV36D QV36D-A QV36DB QV36DB-A QVI25 QVI30 QVI35 QVI-25FB QVI-30FB QV Pier Heat N Glo Gas Stoves: AT-Grand (Also fits the B, C and D models)
AT-Insert AT-Supreme (Also fits the B, C and D models)
AT-ZC and AT-ZC-B Bay Insert and Bay Insert NS CFX Grand-B CFX-IN-B FB-Grand FB-IN FB-ZC Grand-I35-SP Grand-XT Supreme-I30-SP Supreme-XT ZC-XT Bay-38HV Bayfyre-TRS Bay-GDV-95 – After May 1996 L-COR-TR L-COR-TRC L-COR-IPI Pier-38HV Pier-TR Pier-TRC Pier-TVFL R-COR-TR R-COR-TRC R-COR-TRC-IPI ST-38HV ST-42TVFL ST-TR ST-TRC 6000BE 6000Camp 6000DVTFL – After serial # 12614 6000FLS 6000G 6000GBV 6000GDVFL – After date code 2/96 (Only for 30 sec pilot assembly) 6000SEB 6000TRB 6000TRI 6000TRI-SP 6000TR-NF 6000TR-OAK 6000TRXI 6000TVB 6000TV-OAK 6000XL 6000XLS 6000XLS-NF 6000XLSB 6000XLT 6000XLT-NF 6000XLTB 7000TR-NF 7000TV-NF 7000XLS-NF 7000XLT-NF 8000C & 8000C-LP 8000DVTFL – After date code 2/96 8000GDVFL – After date code 2/96 8000TR 8000TRC 8000TRD 8000TR-Oak – Pre serial # 0021116425 8000TVC 8000TVD 8000TV-Oak – Pre serial # 0021116948 BE-41 BE-41B BE-41B-IPI …
6. Pleasant Hearth Vent Free Gas Heater Replacement thermocouple
Description
For use with all Pleasant Hearth and Dyna-Glo Vent Free Gas Heaters. Can be used for Vent Free Fireplace Systems, Gas Logs, Wall Heaters, Stoves for replacement parts use. Either for dual fuel or single fuel. 1 year warranty.
7. QuadraFire Heat & Glo and Heatilator Thermopile
Description
Quadra-Fire Gas Stoves: QV32 QV32-A QV32B QV32B-A QV36 QV36-A QV36B-A QV36D QV36D-A QV36DB QV36DB-A QV36DC-A QVI25 QVI30 QVI30S QVI35 QVI35S QVI-25FB QVI-25FB-S QVI-30FB QVI-30FB-S QVI-35FB-S Heat N Glo Gas Stoves: 4000INC 4000INS AT-Grand (Also fits the B, C and D models) AT-Insert AT-Supreme (Also fits the B, C and D models) AT-ZC and AT-ZC-B Bay Insert and Bay Insert NS CFX Grand and CFX-Grand-B CFX-IN and CFX-IN-B CFX-ZC DVT Insert FB-Grand and FB Grand-S FB-IN and FB-IN-S FB-ZC and FB-ZC-S Grand-I35-SP Grand-XT and Grand XTS MLT-Insert SL-Insert and SL Insert-B Supreme-I30-SP Supreme-XT and Supreme XTS ZC-XT Bay-30 Bay-38HV Bayfyre-TRS Bay-GDV-95 Bay-GDV L-CornerDV L-CornerTV L-COR-TR L-COR-TRC L-COR-IPI L-COR-TVFL Pier-38HV Pier-DVT Pier-GDV Pier-TR Pier-TRC Pier-TV Pier-TVFL R-CornerDV R-CornerTV R-COR-TR R-COR-TRC R-COR-TRC-IPI R-COR-TVFL ST-38GTV ST-38HV ST-42FL ST-42GTV ST-42TVFL ST-DVT ST-GDV ST-TR ST-TRC 36DV88 4000GDV 4000TV 4000WH 5000GDV 5000TV 6000ARCH 6000BE 6000C 6000CAMP 6000CF 6000DVT 6000DVTFL 6000FLS 6000G 6000GBV 6000GDVFL & 6000GDVFL-NF 6000SEB 6000SGDV 6000TRB 6000TRI 6000TRI-SP 6000TR-NF 6000TR-OAK 6000TRXI 6000TV 6000TVB 6000TVFL & 6000TVFL-NF 6000TV-OAK 6000XL 6000XLS & 6000XLS-NF 6000XLSB 6000XLT & 6000XLT-NF 6000XLTB 7000TR-NF 7000TV-NF 7000XLS-NF 7000XLT-NF 8000DVT 8000DVTFL 8000GDV 8000DVTFL 8000TR 8000TRC 8000TRD 8000TR-OAK 8000TV 8000TVC 8000TVD 8000TVFL 8000TV-OAK BE-41 BE-41B BE-41B-IPI BE-41C CFX-36TSP Everest – Pre serial # 5000 GAS36TV Grand-50 BE-32 – After serial # 2107620 BE-36 Not listed, due to the size of the list, are other Heat & Glo and Heatilator units that this Thermopile fits. Contact our store with your make and model to see if this Thermopile works on your unit.
8. Honeywell J40-005 Four Way Key PLATED STEEL
9. Aupoko Universal Gas Thermocouple, 27.5" Direct Vent Fireplace Thermocouple Flame Failure Safety Device Temperature Sensor 446-511, Fit for Heat & Glo & Hearth & Home Fire Places
Feature
- WIDE COMPATIBILITY: This 27.5″ gas fireplace thermocouple can be used for health & home gas stoves and fireplaces.
- EASY INSTALLATION: This gas log thermocouple is easy to install. Please keep the head to be heated when using or it may not work properly.
- PREMIUM QUALITY: The material of thermocoupler is copper, with firm construction for durable use.
- HIGH TEMPERATURE RESISTANCE: The power of thermal coupler is natural and propane gas. The temperature resistance can get over 700 degree centigrade.
- WARRANTY: This fireplace thermocouple complete with 1 – Year limited warranty, should be there any question, please feel free to contact us.
Description
Specifications:
Temperature Resistance: Over 700℃
M11x1 head and M10x1 end
Thermocouple Length: 700 mm
Overall Length: 27.5″
Package Included:
1 Pc x Universal Gas Thermocouple
Conclusion
By our suggestions above, we hope that you can found Fireplace Honeywell 16 Thermocouple for you.Please don’t forget to share your experience by comment in this post. Thank you!
