The Best 25Ft Heating Hose

The core of the Camco Taste PURE Heated Drinking Water Hose is made with an NSF 61 certified, drinking water safe hose that is BPA, phthalate and lead free. The Heated Drinking Water Hose won’t leach harmful chemicals into your water or leave it tasting like plastic the way standard garden hoses do. It is ideal for RVs, livestock, agriculture, kennels and other industrial, commercial and residential uses. Its energy saving thermostat only heats as needed, saving you money on your electric bill. The fittings are heavy duty machined and plated for maximum corrosion resistance and the durable exterior jacket protects water hose and electrical components from damage or exposure. CSA Low Lead Content Certified to NSF/ANSI 372. Compliant with all federal and state level Low Lead Laws.

Product Description

Cold weather water hose ideal for normal farm and garden use, and light commercial applications. Ideal for tasks requiring running water in below freezing temperatures. Thermostatically controlled to activate automatically when temperatures are below 45 deg (degrees) F (Fahrenheit) and turn off when temperatures are above 50 deg F. Tested down to -42 deg F. Features a grounded power supply, grounded nickel plated brass female & male couplings, protective bend restrictors at both ends, abrasion resistant cover, and knit reinforcing. Heater wires are extruded directly into the hose walls for uniform heating and unrestricted water flow. Made with FDA (Food and Drug Administration) approved materials. Drinking water safe. UL (Underwriter’s Laboratories) listed. MET approved. 1-year limited warranty. The Product is manufactured in China.

From the Manufacturer

The 25-Feet Series 2 PIRIT Heated Hose is made from drink-safe materials and thermostatically controlled to automatically turn on when needed and prevent water from freezing in the hose down to minus 42-Degree Fahrenheit. With a new, tougher thermostat hardwired to the outside of the hose you are guaranteed more consistent and customizable results depending on your need. The hose comes with a 1-year limited warranty against defect.

Product Description

This ducting was designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is a heavy-duty dual aluminum foil that is fire/flame resistant. While the outer layer is made of dual PVC thermoplastic that protects the aluminum from cuts and tears, while stopping leakage. The ducting are held together by an internal steel-wire spiral that is flexible and easy-to-install in hard to reach places. The ducting can be shorted but cutting the tube, to fit various applications. Includes two stainless steel duct clamps.

Applications

Used in conjunction with a duct fan system for various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, transporting heating and cooling, and other installations. It is also used in the cooling of AV equipment rooms, closets, racks, and cabinets.

Camco’s Heated Water Hose provides safe drinking water in below freezing temperatures by combining a drinking-water-safe hose with a self-regulating heat source encapsulated in an all-weather, PVC coating. Camco has tested it’s Heated Drinking Water Hose at ambient temperatures down to -40°F while maintaining an inside water temp well above freezing. Features machined, nickel-plated fittings for maximum corrosion protection. Includes a female-to-male adapter for connection of the water source to either end of the hose; depending on the location of your electrical connection. Operates on 120VAC / 2.27 AMPs. Made in the USA. Limited 1 Year Warranty (3 Year Warranty on Electrical Components)

Cold weather heated water hose ideal for RV、normal farm and garden use, and light commercial applications.
Ideal for tasks requiring running water in below freezing temperatures.
grounded brass couplings,
abrasion resistant cover,
Heater wires are extruded directly into the hose walls for uniform heating and unrestricted water flow.
Drinking water safe.

TIPS: When connecting the water pipe, please make sure that the silicone washer is completely
sealed to avoid water leakage. If water leakage occurs, please add another silicone washer

The “Air Ventilator Orange” ducting hose is a cost-effective and high-quality air ventilation duct. This duct hose is made to handle applications that involve air movement, and always does the job well. Each hose has a high-visibility orange body, which is made from a polyester fabric that is coated with PVC vinyl. The body of the air duct hose is reinforced by a spring steel wire helix, designed to enhance the physical frame of the ducting. This gives the hose added strength while allowing the product to maintain its flexibility. In addition to the protection of the wire helix, the external section of the hose is protected by a wear-strip. If your application involves this air duct being dragged across the ground or another kind of surface, the wear-strip will guard the body from most physical abrasions. This flexible ducting is specifically designed to facilitate the transfer of air. Beyond general air ventilation, these duct hoses can be used with hot and cold temperatures, ranging from -20 degrees Fahrenheit up to around 160 degrees. This makes them perfect for use as air conditioning hoses in portable AC units, dehumidification, heating and much more. The bright orange body can also provide a practical advantage when high visibility is needed. The Air Ventilator Orange duct hose has an excellent 10:1 rate of compression, meaning it can be folded down for easy transport and storage if needed. It also comes fitted with belted cuffed ends, which allow users to quickly and easily attach and install the hose without the need for extra clamps. The super compressibility and belted ends make this product very easy to unhook and move to a different site when needed. It also comes in a wide range of sizes to suit every need. The inner diameter (ID) measurement runs up to 24 inches, with ID measurements of 4”, 6”, 8”, 10”, 12”, 16”, 18” and 20” available. The hoses are stocked in standard lengths of 25 feet and provides strength and versatility in all situations.

Product Description

This ducting was designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is a heavy-duty dual aluminum foil that is fire/flame resistant. While the outer layer is made of dual PVC thermoplastic that protects the aluminum from cuts and tears, while stopping leakage. The ducting are held together by an internal steel-wire spiral that is flexible and easy-to-install in hard to reach places. The ducting can be shorted but cutting the tube, to fit various applications. Includes two stainless steel duct clamps.

Applications

Used in conjunction with a duct fan system for various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, transporting heating and cooling, and other installations. It is also used in the cooling of AV equipment rooms, closets, racks, and cabinets.

Actual Length: 7 Meters/24.6 Ft. 1/4″ x 1/2″ OD all copper line set, commonly used for 12000 BTU and 18000 BTU mini split air conditioners. Pre-flared for easy and simple connection on most mini split air conditioners and brands.