971 reviews analysed
1. 30pcs Black Pipe Post Bolt Screw Rubber Thread Protector Cover Vinyl Tube End Caps,Assorted 1/4-inch to 1/2-inch-3 Sizes
Feature
- 30PCS– Assorted 1/4″ to 1/2″ Black Vinyl Round End Cap Cover for Pipe Plastic Tube Hub Caps Tubing Bolt Screw Rubber Thread Protector Safety Cover 3 sizes: 1/4″(10pcs), 3/8″(10pcs), 1/2″(10pcs),Total 30pcs.
- Fits OUTSIDE diameter of sizes OD 1/4″ to 1/2″ round tube or pipe.VC Series Vinyl caps are extremely flexible and Pliable. Can stretch up to 1/16″ larger for a snug fit without tearing, splitting, or shredding. Select the size that matches or is slightly smaller than the outside measurement of the pipe or tube
- Slide these flexible caps on and they conform for a snug fit. Black Vinyl Round Flexible End Cap Bolt Screw Rubber Thread Protector Safety Cover
- The caps are 13/16″ tall for 3 types . Made from soft PVC “rubber like” that will hold up for years of use. Round finishing caps for round tubing and rods make economical, attractive glides for everything from household and patio furniture to exercise equipment.
- As finishing caps they cover any scratches, burrs or distortions that may result from cutting operations. · In addition, they also provide protection against injury from sharp rod and tubing edges.
Description
High quality slip-on vinyl soft PVC end caps.
These Vinyl End Caps are designed to fit round tubular steel, wood or plastic.
Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding.
Made of soft PVC that will hold up for years of use.
Package:
1/4″ x 10pcs
3/8″ x 10pcs
1/2″ x 10pcs
Total 30pcs
**DIMENSIONS ARE FOR PIPE OUTSIDE DIAMETER**
2. Prescott Plastics 1 1/2 Inch Round Black Vinyl End Cap, Flexible Pipe Post Rubber Cover (8)
Feature
- Fits OUTSIDE diameter of 1 1/2″ OD round tube or pipe (*THIS IS NOT the hole size*)) & can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1″ deep / tall to provide a secure fit.
- High-grade Prescott Plastics brand black soft PVC “rubber like” slip on caps are made in the USA. Our caps are designed to hold up against impact abuse, and harsh weather conditions to provide years of protection.
- These easy to install 1.5 inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project.
Description
High quality Prescott Plastics brand slip-on vinyl soft PVC end caps. These Vinyl End Caps are designed to fit round tubular steel, wood or plastic. Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding. Made in the USA from soft PVC that will hold up for years of use. **DIMENSIONS ARE FOR VINYL CAP INSIDE DIAMETER**
3. Prescott Plastics 2 Inch Round Black Vinyl End Cap, Flexible Pipe Post Rubber Cover (4)
Feature
- ATTENTION : THESE DO NOT FIT 2″ PVC, measure your tubing carefully
- Fits OUTSIDE diameter of 2″ OD round tube or pipe (*OUTSIDE diameter*) & can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1″ deep / tall to provide a secure fit.
- High-grade Prescott Plastics brand black soft PVC “rubber like” slip on caps are made in the USA. Our caps are designed to hold up against impact abuse, and harsh weather conditions to provide years of protection.
- These easy to install TWO inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project.
Description
High quality Prescott Plastics brand slip-on vinyl soft PVC end caps. These Vinyl End Caps are designed to fit round tubular steel, wood or plastic. Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding. Made in the USA from soft PVC that will hold up for years of use. **DIMENSIONS ARE FOR PIPE OUTSIDE DIAMETER**
4. Temoyj Cable Clamp,10 Pack 2 Inch Stainless Steel Cable Clamp, Pipe Clamp, Metal Clamp, Rubber Cushioned Insulated
Feature
- HIGH QUALITY- 304 Stainless steel cable clamps with rubber cushioned. Very sturdy and strong. Waterproof, oil-proof, anti rust, anti-corrosion. These features make the clamps can be worked lasted for years. The quality rubber insulation on the clamps held up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place.
- WIDELY USED: It is perfect for mounting varies lines just as the soft tube, steel tube, Aluminum wire line cable . It is widely used in boat/marine, windshield, car, UTV and home etc.
- SIZE- Cable clamp screw hole diameter: 6.5mm, fit for M6( 1/4 inch) screw bolt to through them.
- Environmental friendly- It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which makes them worked last for years.
5. POWERTEC 70148 Dust Control Flex Cuff with Hose Clamps, 2-1/2-Inch
Feature
- Designed to airtight connection of two fittings or hoses without using duct tapes
- Rubber construction provide flexibility to bridge slight diameter differences
- A pair of hose clamps included
- Both ends measures 2-57/64-Inch O.D. and 2-35/64-Inch I.D.
- Connect to 2-1/2-Inch O.D. adapters or hoses
Description
The POWERTEC Dust Control Flex Cuff with Hose Clamps, 2-1/2-Inch, delivers an airtight connection from one dust-collection fitting to another of comparable size, while eliminating the need for flimsy duct tape connections or other permanent fasteners. Firm yet pliable rubber construction allows enough flexibility to bridge slight diameter differences in hose or tubing. Pre-molded indents on the cuff allows for easy, airtight clamp installation. Handy set includes one rubber cuff and two steel hose clamps.
6. EVERCONNECT 4830 Flexible PVC Reducing Rubber Coupling with Stainless Steel Clamps, 2" x 1-1/4, Black
Feature
- Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping
- Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,
- May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors
- Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use
- Each Rubber Fitting is marked with part number, size, and certifications
7. Prescott Plastics 5/8 Inch Round Black Vinyl End Cap, Flexible Pipe Post Rubber Cover (10)
Feature
- Fits 5/8″ round OD tube or pipe ( 5/8″ OUTSIDE diameter) & can stretch up to 1/16” larger for a snug fit without tearing or splitting. 1″ deep / tall to provide a secure fit.
- High-grade Prescott Plastics brand black soft PVC “rubber like” caps are made in the USA. Our caps are designed to hold up against impact abuse, and harsh weather conditions to provide years of protection.
- These easy to install .625 inch push-on caps serve as a long-lasting solution for many household, outdoor, & marine boat dock projects including replacements for fencing railing posts, steel gate rail stopper, rod / rebar or wrought iron caps, thread bolt screw or nut safety, hub cap sheath, or finishing any round tubing project.
Description
High quality Prescott Plastics brand slip-on vinyl soft PVC end caps. These Vinyl End Caps are designed to fit round tubular steel, wood or plastic. Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding. Made in the USA from soft PVC that will hold up for years of use. **DIMENSIONS ARE FOR CAP INSIDE DIAMETER**
8. Self Fusing Silicone Tape – 1" 10′ Black Waterproof Non Adhensive Removable Self Fusing Silicone Tape for Air Hose Repair,PVC Pipe Repair,Leak Seal,Rescue,Wire Insulation(Pack of 1 Piece)
Feature
- Black silicone tape,1 inch * 10 feet per roll,resistant to heat,solvents and chemicals self-fusing silicone tape
- Non adhensive soft silicone tape,remove without residue silicone grip tape,perfect for temporary bundle
- Superior tight sealing leak repair tape,good leak sealing property,perfect for water pipe/air hose leakages
- 1 minute fast self fusing and tight wrapping silicone insulation tape,perfect for electrical insulation
- -60～500℉ temperature range,high temp resistant silicone pipe tape,perfect for auto pipe repairs,protection.
Description
Maxwel self fusing silicone tape widely used:
Such as underwater usages,emergency hose repair,emergency insulating & barrier,fishing industry uses,military applications:
1.As repair tape:home repairs,plumbing emergency repairs,automotive pipe repair,vacuum cleaner hose repairs,garden hose repair tape,hose leakseal tape,protection for hoses & pipes against vibration;
2.As insulation tape:high voltage terminations insulation,power & hand tool insulation tape,insulation for radioactive environments and elements;motor lead protective;
3.As wrap tape:extension cord connection wrap,heavy duty industrial pipe wrap,tool handle wrapping,final wrap for electrical distribution connections,boat rigging wrap,fishing rod guide & grip tape,golf cues grip wrapping,wrapping for irregular shapes,bat/tennis/racquetball grips;
4.Harness wrapping:wrapping of wire rope ends,automotive wire insulation and protective,auto exhaust wrapping,RV hook-up protective wrap & RV repair,jet ski electrical protection,aircraft harness wrapping;
5.As protective tape:adio/loran connection protection,jumper cable grip protection,no residue wrap for corrosion protection;
6.For sea sports:sailboard mast wrap,sailboat chafe protection,boat rigging wrap & protective boat wiring wrap,boat power hook-up protective wrap,salt waterproof wrap;
7.Marine bumper use:marine exhaust & hose repairs,use as mast boot,boat deck fitting wrapping/bandages;
And more places where you will find out it can be used with Maxwel self fusing silicone tape.
9. Dorman Help! 47397 V-Cap Assort.Colored
10. POWERTEC 70130Dust Collection Hose with Fittings Plus Reducer, 2-1/2-Inch to 1-1/2-Inch
Feature
- Ensures excellent work room air quality and shop cleanliness
- Compatible with Porter-Cable Random Orbit Sander models 7334, 7335, 7336 and 333VS
- Fits most palm sanders, Shop-Vac products and others with 1-Inch, 1-1/2-Inch and 2-1/2-Inch ports
- 1-1/4 in. x 10 ft. flexible hose for easy positioning
- Fitting size: 1-3/4-Inch OD/1-1/2-Inch ID
- 1-3/16-Inch OD/1-Inch ID: Includes 2-1/2-Inch to 1-1/2-Inch reducer
Description
The POWERTEC Dust Collection Hose with Fittings + Reducer 2-1/2″ to 1-1/2″ ensures excellent work room air quality and shop cleanliness! Protects the integrity of your craftsmanship and the health of all shop workers. This superb dust collection system is compatible with Porter-Cable Random Orbit Sander models 7334, 7335, 7336 and 333VS. The hose includes two fittings on the ends: 1-3/4″ OD/1″ ID and 1-3/16″OD/1″ ID and also includes 2-1/2 to 1-1/2 reducer to fit most palm sanders and Shop-Vic products!.
Conclusion
By our suggestions above, we hope that you can found Vacuum Rubber Pipes for you.Please don’t forget to share your experience by comment in this post. Thank you!
