The Best Rainbow Vacuum D4c Motor

This is the factory original OEM True H13 class HEPA filter (Neutralizer) for the two speed E2 Type 12 (Black, Silver, e2 Gold) version Rainbow vacuum. If you only have an on and off switch and not a hi and low speed, then this filter IS NOT compatible.

You should replace your filter once every 4-6 years. If you need to replace it more often, you should change your water basin in the middle of cleaning. Once the water gets thick with dirt and debris, it becomes more difficult to filter. The dirt will start to bounce off the sludge and go up through the motor and get caught by the HEPA filter.

Be careful not to vacuum up drywall dust or baby powder as the water has a difficult time filtering this type of material.

Effective serial number 1000000 with a start date of September 4th 2003 through current production. The bulk item number for this is R12647B. Some websites list this part number for a single item which is incorrect.

It is better to toss your old filter and not replace it than to buy a generic filter. Generic filters do very little for the air quality while reducing your airflow and performance.

GENERIC motor brushes for the D4C and D3C Rainbow.

These brushes range in hardness due to poor manufacturing quality so be sure to test when installing otherwise they could ruin your armature.

Be sure to measure and confirm you are ordering the correct size. Tall motor brush (.589 inches wide or between 9/16 and 5/8 inch).

Effective through serial number 7520714. The R5125 is the carbon brush that you need if your serial number is higher or if your measurement is larger.

• Not properly seating in the carbon brushes can cause brush and commutator damage leading to costly maintenance and downtime
• By properly seating in the carbon brushes, it allows you to use rated current almost immediately
• Change all carbon brushes at one time
• Vacuum excess carbon dust to prevent from reaching machine windings and bearings

The M596 Seating Stone is only used to "clean up" the commutator of the armature and not meant to "seat" the brushes.

If you do not seat the motor brushes, you can expect about a one year life before they wear out.

GENERIC motor brushes for the D4C and D3C Rainbow.

These brushes range in hardness due to poor manufacturing quality so be sure to test when installing otherwise they could ruin your armature.

Be sure to measure and confirm you are ordering the correct size. (.4955 or just less of 1/2 inch).

Effective through serial number 7520714. The R5125 is the carbon brush that you need if your serial number is higher or if your measurement is larger.

• Not properly seating in the carbon brushes can cause brush and commutator damage leading to costly maintenance and downtime
• By properly seating in the carbon brushes, it allows you to use rated current almost immediately
• Change all carbon brushes at one time
• Vacuum excess carbon dust to prevent from reaching machine windings and bearings

The M596 Seating Stone is only used to "clean up" the commutator of the armature and not meant to "seat" the brushes.

If you do not seat the motor brushes, you can expect about a one year life before they wear out.

Rainbow Rexair D4C Motor Stage Housing Clip R-2682B 79-8908-06

This is a replacement Rainbow vacuum canister only. The model number is D4C. There is no basin or dolly included, just the motor canister.