Top 10 15 Hp Tohatsu Propellars

Brand New Aftermarket Boat Outboard 3 Blades Propeller

???? OEM Part No.:
362-64102-0
362641020M

???? Diameter(in.): 9.2
???? Pitch(in.): 8.4
???? Spline: 14
???? Rotation: Right-hand

???? Fit on Models:
★ 【Tohatsu Outboard】
1986 – M9.9B2 – 2-stroke
1986 – M15B2 – 2-stroke
1986 – M18C2 – 2-Stroke
2002 – M9.9C – 2-stroke
2002 – M9.9D – 2-stroke
2002 – M9.9D2 – 2-stroke
2002 – M15C – 2-stroke
2002 – M15D2 – 2-stroke
2002 – M18D – 2-stroke
2002 – M18E2 – 4-stroke
2002 – MFS9.9B – 4-stroke
2002 – MFS15B – 4-stroke
2002 – MFS18B – 4-stroke
2003-04 – MFS9.9B2 – 4 Stroke
2003-05,07,08 – MFS15B2 – 4 Stroke
2003-05,07,08 – MFS18B2 – 4 Stroke

★ 【Nissan Outboard】
2002 – NS9.9B2 – 2-stroke
2002 – NS9.9C – 2-stroke
2002 – NS9.9D – 2-stroke
2002 – NS9.9D2 – 2-stroke
2002 – NS15B2 – 2-stroke
2002 – NS15C – 2-stroke
2002 – NS15D – 2-stroke
2002 – NS15D2- 2-stroke
2002 – NS18D – 2-stroke
2002 – NS18E – 2-stroke
2002 – NSF9.9B – 4-stroke
2002 – NSF15B – 4-stroke
2002 – NSF18B – 4-stroke
2002 – NS18C2- 4-stroke
2003 – NS18E2 – 4-stroke
2003,05,07-08 – NSF18B2 – 4 Stroke
2004 – NSF9.9B2 – 4 Stroke
2005, 07-08 – NSF15B2 – 4 Stroke

【 ADDITIONAL INFORMATION 】
Rubber is inside with the propeller as the picture shown.
Put on the propeller shaft for installation and it can be used.

** May fits other engine/year used doesn’t list above. **
** Do drop us a message for fitment confirmation if you’re not sure. **

Mercury/Mercruiser/Mariner Black Max Three Blade aluminum prop 14.25 x 21. Includes the Flo-Torq II hub kit. More than just an aluminum propeller, the Black Max is the best three-blade aluminum prop available anywhere. And anywhere is usually where you’ll find it. Whenever you need good overall performance, Black Max is there. Designed to fit Mercury/Mariner 135, 150, 175, 200, 225, 250 HP outboards Verado 135-275HP and Mercruiser Alpha and Bravo One under 400 hp (3.0L, 4.3L, 4.3LH, 4.3L EFI, 5.0L, 5.0L EFI, 5.7L, 5.7L EFI, 350 MAG MPI). Features high quality die-cast three-blade aluminum in an attractive Phantom black finish. Durable and easy to maintain and repair. Equipped with Flo-Torq II® hub system for the high horsepower outboards and stern drives. This is a right hand rotation prop, left hand rotation (counter rotating) is not available in aluminum.

Boat part number 1075395 is a new Spitfire 4 blade 10.6 x 12 pitch, right hand rotation propeller from Mercury Marine, part number 48-8M8026625 .

The Spitfire provides 16-25% faster acceleration, superior holding with no penalty in top speed vs. a comparable 3 blade aluminum propeller.

This is a 10.6 x 12 pitch, 4 blade right hand rotation propeller. Measures approximately 3 3/8″ OD across the back of the hub. Includes Flo-Torq Reflex Hub Kit, part number 835257K12 .

Fits: Mercury / Mariner 25 HP BigFoot, 30 HP 4-Stroke (2005 and earlier) 40-60 HP 2-stroke and 4-stroke outboard engines.

Specifications:

• Part Manufacturer: Mercury Marine
• Series: Spitfire
• Part Number: 48-8M8026625
• UPC: 745061890251
• Size: 10.6 x 12 Pitch
• Rotation: Right Hand / Standard
• Blades: 4
• Material: Aluminum
• Color: Black
• Finish: High-Gloss

Sold as seen in pictures. Customers please note every computer shows colors differently.

All measurements are approximate. Hardware not included / installation manual is included.

Boat part number 1074484 is a new Black Max 3 blade 13 1/4 x 17 pitch, right propeller with hub kit from Mercury, part number 48-77344A45 .

The Black Max series of propellers are constructed from black powder coated aluminum and are recommended for boats with up to 250HP and a top speed of less than 50MPH.

This is a 13 1/4 x 17 pitch, 3 blade right hand propeller. It measures approximately 4 3/8″ OD across the back of the hub.

This propeller includes the following hub kit, part number unavailable (all measurements approximate):

• Bushing – 2″ W x 2″ H x 3 1/2″ L
• 15 Spline Hub – 1 3/4″ Dia. x 4 3/8″ L
• Washer – 2 5/8″ OD / 1″ ID
• Threaded Nut – 1 1/8″ OD x 7/8″ H / 3/4″ ID
• Attaching Ring – 1 5/8″ W x 1 3/4″ H / 3/4″ ID

Specifications:

• Part Manufacturer: Mercury
• Series: Black Max
• Part Number: 48-77344A45
• UPC: 745061018471
• Material: Aluminum
• Color: Black
• Finish: Glossy
• Size: 13 1/4 x 17 pitch
• Rotation: Right

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Hardware and instruction / installation manual not included.

Brand new, genuine Mercury Marine / Mercruiser Spitfire 4 Blade Prop 14×23 Propeller. This is a factory original equipment part, not aftermarket. Fits: For 135-300HP 2-Stroke and 4-Stroke outboards and Alpha and Bravo I stern-drives.

• Exchangeable Hub System saves money when replacing or upgrading your prop in the future • High Performance Blade Geometry • Optimal Blade Thickness for maximumperformance and durability • Cupped Trailing Blade Edge • Precision Balanced Blades • High Gloss Powder Coat • Limited Lifetime Warranty. The Vortex™ XHS™ from Michigan Wheel is an aluminum replacement propeller with an Exchangeable Hub System. Features such as high performance blade geometry, high gloss black powder-coat finish, and interchangeable with the Mercury Flo-Torq® II system make the Vortex a great choice for a replacement or spare prop. The exchangeable hub system absorbs impact and stress caused by shifting gears, while the cushioned hub is designed to spin under significant impact reducing the potential for lower unit damage. Backed by Michigan Wheel’s limited lifetime warranty. Propeller and Hub Kit sold separately. Vortex™ propellers must be used with XHS™ hub system or Mercury Flo-Torq® hub system. XHS™ Hub Kits include forward thrust washer, inner hub, and aft drive adapter. Kits do not include prop nut, tab washer, and cotter pin. Props are standard right hand rotation. Vortex #992105.

Brand new, genuine . This is a factory original equipment part, not aftermarket.

HP B300 – mounting kit (mount bracket) for LCD display/ thin client – mounting interface: 100 x 100 mm – for EliteDisplay E233

Brand New Aftermarket Outboard Propeller Shaft

???? OEM Part Number:
362-64211-2/1/0
362642112M
362642111M
362642110M
3BA642110M

???? Fit on Models:
★【 Nissan Outboard – 2 & 4 Stroke 】
2002 – NS9.9B2, NS15B2 – 2-stroke
2002 – NS9.9C, NS15C – 2-stroke
2002 – NS9.9D, NS15D, NS18D – 2-stroke
2002 – NS18E – 2-stroke
2002-03 – NS9.9D2, NS15D2 – 2 Stroke
2003 – NS18E2 – 2 Stroke
2002 – NS18C2
2002 – NSF9.9B, NSF15B, NSF18B
2002-03 – NS18E2
2003,05-08 – NSF18B2
2004,06 – NSF9.9B2
2005-06,08 – NSF15B2
2008 – NSF9.9C
2008-14 – NSF15C, NSF20C
★【 Tohatsu Outboard – 2 & 4 Stroke 】
1986 – M9.9B2, M15B2, M18C2 – 2-Stroke
2002 – M9.9C, M15C – 2-stroke
2002 – M9.9D, M18D – 2-stroke
2002-03 – M9.9D2, M15D2 – 2 Stroke
2003 – M18E2 – 2 Stroke
2002 – M18E2
2002 – MFS9.9B, MFS15B, MFS18B
2003-04,06 – MFS9.9B2
2003-08 – MFS15B2, MFS18B2
2008,11 – MFS9.9C
2008-14 – MFS15C, MFS20C

PACKAGE
◆ 1 x Propeller Shaft for Tohatsu Nissan Outboard