Top 9 Cvt For 13 Hp Engine

This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.

Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).

This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments. 

Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Engine compatability:  Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.

Specifications:

TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan

This is a quality after market reproduction of the Comet made TAV2 Torque converter kit. Designed to be used on go-karts, mini-bikes and wake wrenches with engine sizes 3hp to 7hp. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket.

Specifications:
Large Pulley Driven unit: Dia. 157mm or 6"
Driver clutch bore: 3/4"
Top width: 19mm(3/4")
Sprocket teeth: 10 tooth for #40/41 chain and 12 tooth for #35 chain
Engagement range: 2350-200 RPM
Recommended engine: 2HP – 7HP engines, 3/4"shaft with flat key

Fits all engines with a 3/4" Straight Crankshaft.

This Kit Includes:
1 x Drive Belt
1 x Plastic Cover
1 x 3/4" Driver Pulley
1 x 5/8" Driven Pulley (6" Diameter)
1 x Aluminum Mounting Plate
1 x 10 Tooth Sprocket for #40 #41 Chain
1 x 12 Tooth Sprocket for #35 Chain
1 x Mounting Hardware Kit

This kit has everything you will need!!
Please see pictures for all that is included.

Inlet Air Filter Kit for Predator Engines 68120, 69730, 60363 with 212cc & 6.5HP

Please review all product information to ensure that this product is compatible with your unit.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

• Model and/or Sub-model
• Spec and/or Type Number
• Code and/or Serial Number
• Year
• Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

Package include 1 carburetor,2 gasket,1 air filter,1 pre filter,1 spark plug,1 Carburetor Overhaul Kit

Fit for the following models:
92200 Series (0007-1250) ; 092252-1229-E2;091252-1049-E2;091252-1049-E4;091252-1049-E5;091252-1250-E2;091252-1259-E1;091252-1278-E1;091202-1309-E1;091202-1361-E1;091202-1372-E1;091202-1383-E1;091202-1016-E1;091202-1017-E1;091202-1212-E1;091202-1241-E1;091202-1244-E1;091202-1249-E1;091202-1258-E1;091202-1264-E1;091202-1300-E1;091212-1022-E1;091212-1230-B1;091212-1237-E1;091212-1240-E1;091212-1267-E1;091212-1267-E2;091212-1269-E1;091212-1290-E1;091212-1331-E1;091212-1360-E1;091212-1370-E1;091212-1379-E1;091212-1381-E1;091232-1014-E1;091232-1035-E1;091232-1035-E2;091232-1036-E1;091232-1040-E1;091232-1213-E1;091232-1214-E1;091232-1229-B1;091232-1229-E1;091232-1234-E1;091232-1253-E1;091232-1265-E1;091232-1286-E1;091232-1286-E2;091232-1298-E1;091232-1310-E1;091232-1325-E1;091232-1328-E1;091232-1332-E1;091232-1363-E1;091232-1369-E1;091252-1049-E1;092202-1242-E1;092212-1246-E1;092232-1007-E1; 092232-1035-E1;092232-1036-E1;092232-1040-E1;092232-1230-E1;092232-1238-E1;092232-1241-E1;092232-1243-E1;092232-1244-E1;092232-1245-E1;092232-1249-E1;092252-1049-E1;092252-1049-E3;092252-1049-E5;092252-1049-E6;092252-1229-E3;092252-1237-E1;094202-0115-E1;094202-0117-E1;094202-0118-E1;095202-0117-E1;095212-0118-E1;095212-0194-E1 Engine

This Briggs & Stratton fuel shut-off valve is for 4, 5.5 and 9 HP Vanguard engines.

180 days money back guarrantee! Lifetime warranty against manufacturer defect!

Fitment models:

Honda GX140 GX 140 GX160 GX 160 GX168 GX 168 GX200 GX 200 5HP 5.5HP 6.5HP Engine
212cc Carburetor for Harbor Freight Predator 6.5hp Go Kart OHV Engine.212CC Carburetor fit Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)
Honda WP30X water pump, Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 generator

K&N performance High-Flow Air Filters are engineered to improve engine performance by increasing airflow up to 50%. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your motorcycle, ATV, or Side-By-Side vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world’s toughest race tracks, so we can bring the highest level of performance for your journey. Join the millions of customers who have saved money and improved performance by upgrading to K&N filtration. Fitment Information: 1986-2006 KAWASAKI VN750 Vulcan

Bullet Lines 1″ torque converter driver replaces Comet 40 Series Torq-A-Verter models 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more

Bullet Lines 1″ 40 series torque converter driver is a symmetrical inline small engine clutch that replaces Comet 40/44 Series Torq-A-Verter models 203015A, 203015, and works with 8 – 18 hp engines within the 1600 – 3300 RPM range. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission providing higher speeds, and smoother acceleration. The 40/44 series is heavily used in three wheelers, ATV’s, LTV’s, go karts, and other transportation vehicles. Commercial uses include oil well pumps, tractors, tillers, lawnmowers, construction, and industrial equipment.

This torque converter fits 8 – 18 hp engines with a 1″ shaft,1/4″ keyway, and tapped end.

Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.