The Best 300 Hp 130 Volt Motor

This AC motor with low noise,more robust and with the voltage of 110V.
It is an electric motor widely used for household, hand-made, school project,AD board anything else you want.

Specification

N.W. Weight: 0.55kg
Shaft Diameter: 7mm
Working Voltage: AC 110V
Frequency: ~50/60Hz
Power: 14W
Speed: 60/72RPM
Torque: ≤3Kg.CM
CW/CCW (Controllable)

It is normal that the motor becomes hot during motor working (the surface temperature may reach to 80-90℃ )

Descriptions:
* SINGLE-PHASE CIRCUIT: This single-phase asynchronous motor speed controller can be used for 24V, 36V, 90V DC motors
* HUMANIZED SHELL DESIGN: This electric speed regulator has small size, high precision, wide speed controlling range, low power consumption, Used for single （1/3）phase DC motor.
* CONVENIENT SPEED CONTROL: The Speed Regulator with adjustable knob can be used to adjust voltage freely, convenient and simple.
* LONG SERVICE LIFE: Our Knob motor speed controller with Over Current protection and short circuit protection.(with 5A fuse)
* WIDE APPLICATION: This motor speed controller could widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries

Features:
* Operating Voltage: AC 110V
* Controll motor Power: 0.01-400W
* Ouput DC Votage: DC 0-90V Adjustable
* Fits for DC 24V, 36V, 90V ect DC Motor
* Size: 100*60*112mm
* PW PW: connected as emergency stop
* M+ M-: motor + Motro -(DC output)
* AC AC: 110AC input

Package:
* 1*speed controller

Attention:

* Don’t ran the motor at full speed at first, please increase the speed gradually. Or the fuse will be damaged.

1.5 hp – 56 Frame – 3430rpm – Single Phase – 115 / 208-230volt – 5/8″ shaft diameter – 1.874″ shaft length Please see attached Pics for motor dimensions and frame dimensions Technical Info: Horsepower: 1.5 Amperage: 8.40 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3430 Torque: 2.27lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotation Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 68.0 Weight: 40 lb

Parameters:
● Voltage: Universal 12V or 24V
● Overload current: 10A
● Rated power: 12V/120W, 24V/240W
● Size: 3.66*1.42*1.26 inch
● Weight: 3.53oz

Product features:
●PWM stepless speed regulation switch can completely turn off the output. Extra long knob screw to meet installation needs
●The appearance is small and good-looking, and it supports adjustment of DC motors, motors, pumps, lamp beads, light strips, fans, etc
●Comes with heat sink to meet heat dissipation requirements

Wiring Connect:
● Red wire: Connected to the positive pole of power supply and motor.
● Blue wire: Connected to the negative pole of motor.
● Black wire: Connected to the negative pole of power supply.
Wiring precautions: (can not be reversed, wrongly connected)

Product size:
●Shell size: 2.48″*1.41″*1.26″
●Knob diameter: 0.28″
●Knob thread: 0.55″
●Knob with knob cap total length: 1.18″
●Cable length: 3.93″

Package included:
●1 × DC Speed Controller Switch

NOTE: The governor is suitable for 12 and 24V DC power.
It cannot be connected to household 220V voltage.
When using it, the positive and negative poles of the power supply cannot be reversed.

Dayton 4MA16

Specification:
Applicable voltage: DC12~48V (no AC connection)
Applicable current: rated current 20A; maximum current 40A; static current 0.005A
Power range: within 20A for a long time; limit power 1200W
Voltage regulating range: PWM output range 0% ~ 100%, (stop ~ maximum speed)
PWM frequency: 25kHZ

Package List:
1 × DC Motor Governor

Note:
This governor is only used for brush DC motor. It is not suitable for brushless DC motor and cannot be used as voltage regulator.

Method of use:
1. Turn off the power, connect it according to the wiring diagram and make sure the connection is correct.
2. Fix the controller well and set the speed to the lowest “0”, so as to avoid sudden large current and permanent damage when starting the power supply;
3. Then turn on the power and adjust the speed knob to the desired position. Please turn off the power when not needed;
4. The governor is connected to the motor. If the torque or speed is found to be inconsistent with the requirements, please adjust the fine-tuning potentiometer on the side of the product
5. To change the running direction of the motor, simply replace the jumper lines of “CCW” and “CW” on the back of the controller.
6. Select COM and CW short connection, then the motor will rotate clockwise.
7. Select COM and CCW short connection, then the motor do counterclockwise rotation.
(when changing direction, do not change the direction until the motor stops running completely.)
Specifications:
Power supply: AC220V 50/60hz
Rated power: 400W
Environment  temperature: – 10 ~ + 50℃;
Relative humidity:<90%;
Speed regulation range: 90-1400r/min 50HZ, 90-1700r/min 60HZ
Weight: 295g
Wiring method:
Black wire is the motor main wire, red and white are the capacitor auxiliary wires, and 2 blue wires are the speed control feedback wires, the green wire is the ground wire.
Package includes:
1 x Speed Controller