Top 10 Shark Slider S1

This is one pair of additional carbon fiber tubes that allows iFootage Shark Slider S1 Standard version to extend it’s working length to 1800mm (5.9′) long. The extension tube offers a smoother track glide and a more stable platform compared with single track designs even when the resistance pulleys are not being used. 6-Layers of carbon fiber, strong, stable and lightweight

The Ifootage Shark slider provides best in class performance at an affordable price. this bundle provides the Auxiliary weight, extra rods, belt, and carrying case. Precisely aligned high quality carbon fiber rails and high quality carriage bearings on a wide track, are the basic building blocks of The Shark slider. These features produce very low and consistent rolling friction over the entire travel range. And torques on the carriage from camera panning/tilting, or unbalanced camera payloads, have negligible effect on rolling friction. For the operator, that means smooth shots with no surprises. But the Shark has another very important design feature…. a belt driven flywheel. The rotational inertia of the flywheel is transformed into linear inertia at the carriage. The combination of great basic slider design and manufacturing, combined with the flywheel action, makes getting super smooth and consistent slides very easy.

World’s smallest remote controlled Electronic camera slider & Motorized 360° Panoramic and Micro Dolly With super slow speeds- Lightweight, durable and backpack friendly. – Works with multiple cameras, GoPro, mirrorless and smartphones. Lifts 750 grams vertically. Super slow speeds are great for time lapse and real time footage. – Includes a 9 speed remote, easy to use, setup quickly battery lasts for hours. – Operates in any position, vertically, inverted or horizontal, with multiple 1/4″ threads at all touch points. Can be used with tripod or suction cups to shoot at any angle. – Converts to a Panorama mount or a dolly . Track can be extended indefinitely. – No apps required.iPhone 7, 8,X users Note: : Main camera built-in optical stabilization can not be disabled, use front camera lens in slider mode. – Micro sized table top dolly easily connects to your Movie Maker. Open a whole new world of camera motion. – Dolly wheels can be adjusted to move in a very wide or tight arc, giving you unlimited camera angle setups. – Has both manual AND electronic power mode – Locking system makes Micro Dolly super compact and highly portable – Lightweight, durable material.

The 1″ Vortex water flowmeter is +/-2% of reading accurate over the range 1gpm to 20gpm. This meter will read flow from 0.5gpm to 30gpm. With no rotating parts such as paddle meters or turbine meters, reliability is dramatically increased. It will not change calibration over time due to bearing wear. In irrigation systems, the meter does not have to be removed for system blow out as many commonly used irrigation meters must be. It also has a display with flow and total for easy reading and troubleshooting. With the 2 wire pulse output, it can be connected to the wired input of many widely used irrigation timers. When connected to the Plaid Systems WiFi Sprinkler Controller, it can monitor and report incorrect flow rates so that you can correct problems before they become a disaster. NOTE: This version of the meter is meant to be connected to an irrigation timer flow input (such as Spruce Irrigation or Rachio). To use without a timer, this REQUIRES a resistor in series with the power supply. See data sheet for exact specifications.