Top 10 Viking Oven Gasket Replacement

Perfect replacement for Viking range grate rubber feet / grate bumper feet. Equivalent to part numbers PD040035 PD040075 AP5316217 VGSU. Works with DVGSU101 VGRT560-6GQ. Made from high-quality, durable, heat-resistant rubber. Beware other replacements that are made from standard rubber without heat resistance. Worn out or missing feet can lead to scratches on your range, damaging its appearance. Worn out or missing feet can leave your grates without proper leveling, leading to tilted pans and uneven cooking. Simply turn your grate over, pop out the old feet and put the new ones n their place. 4 feet per grate – 1 at each corner. Please note: This is an aftermarket replacement product (produced by Impresa Products) meeting or exceeding the quality of OEM feet (based on in-house testing). We have no affiliation with or endorsement from Viking.

Blue Silicone Group Gasket For E61 Coffee Machines Grouphead / Portafilter – 8.5mm

High quality Cafelat group gaskets are made from food grade FDA silicone. Unlike regular gaskets that are made from rubber these do not have any smell or taste whatsoever, and are easy to change since they will not bake rock hard like rubber does. If you have ever struggled to change an old gasket you cannot help but notice the awful smell and the black soot that comes off the rubber. And that is what you are potentially consuming with each drink. Cafelat has spent months testing and adjusting the material so that these have the same compression strength as rubber, but are also softer so that it is easier to create a good seal. The replica E61 groups made these days are pretty much all the same, the different machine manufacturers then use either an 8mm or an 8.5mm group gasket. This is the blue, thicker 8.5mm gasket. The thickness of the gasket will determine the “lock-in” position of the portafilter handle. Ideally you want the handle to lock in directly towards you (6 o’clock position). If the gasket is too thin it will lock in too far. If the gasket is too thick it will not lock in enough. Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.

Wood Stove Maintenance:
✔ Replace worn gaskets yearly on air-tight stoves.
✔ For peak efficiency check woodstove gaskets regularly and replace each season.
Benefits of Midwest Hearth Gaskets:

• Graphite impregnated gasketing is more abrasion resistant and less likely to get stuck with creosote ensuring a better and more consistent air tight seal.
• Black gasket is used by leading stove manufacturers due to better aesthetics and higher performance.
• There is no need to paint graphite impregnated gasketing.

Directions:

• Be sure stove is cold.
• Wear protective gloves and eye protection.
• Protect work area with a drop cloth.
• Use a screwdriver or scraper to remove old gasket and clean door channels down to bare metal.
• Apply a bead of gasket cement in door channel.
• Press new gasket into wet cement and close door to check for airtight fit.
• Trim gasket as needed.
• Clean up all cement spills or excess immediately with wet cloth.

This Strainer Gasket fits between the food strainer body and the screen. The gasket is for the Victorio food strainer model 250, however it also works great on the Back to Basics 220 and Villaware model food strainers.

Thor kitchen 36″ Stainless steel Pro-Style Gas Rangetop with 6 Sealed Burners HRT3618U. Required cutout size (W x H x D) 36 1/2 inches x 7 3/8 inches – 7 7/8 inches x 24 inches

Kit includes the following parts: FOR BOILER AND STEAM VALVE: 1x O-RING 112 IN EPDM 70°SH – DM0041/081 1x O-RING 167 IN EPDM 70°SH – DM0041/082 1x FILTER HOLDER GASKET (8.5) – NG01/001 FOR SOLENOID VALVE AND SAFETY VALVE: 3x GASKET OR 2025 – WGADM0041/022 FOR STEAM PIPE ASSEMBLY: 1x GASKET OR 2025 EPDM 70°SH – NM02.007

Remflex’s unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees—day after day, week after week, year after year. Now, they’re bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.