988 reviews analysed
1. FRAM CF10134 Cabin Air Filter
Feature
- Filters up to 98% of dust, pollen, and other contaminants
- Arm & Hammer baking soda combined with carbon cleans the outside air flowing through the ventilation system
- Provides more air flow for improved performance and helps prevent musty odors from forming inside the vehicle
- Keeps damaging particles from entering the engine and causing increased engine wear
- Installation instructions are included in every box, along with QR codes to installation videos
Description
FRAM Fresh Breeze Cabin Air Filters can keep up to 98% of road dust and pollen particles from entering your vehicle to improve your driving comfort. Plus, it’s the only cabin air filter with Arm & Hammer baking soda and activated carbon embedded in the filter media that can help remove odors flowing through the vehicle ventilation system.
2. GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
Feature
- 4 Hole sizes from 6.3Mm(1/4″), 8mm(5/16″ ), 9mm(23/64″ ), 10mm(25/64″ ).
- 6 different Push pin rivet for many brand vehicles.
- Great material – these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- Widely application – these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
Description
Specification: material: black nylon, suitable for car Use better replacement for original old worn broken one. Push type, easy to fasten.
3. Acdelco 12690512 GM Original Equipment Vapor Canister Purge Valve, 1 Pack
Description
An ACDelco GM Original Equipment Vapor Canister Purge Valve is an emission control component and is a GM-recommended replacement for your vehicle’s original component. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. This original equipment vapor canister purge valve has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
4. Gates 31838 Fuel Tank Cap
Description
Fuel Cap
5. SunplusTrade 240 Pcs Push Type Retainer Clips for Toyota GM Ford Honda Acura Chrysler with Plastic Storage Case
Feature
- 240 Pieces Push Type Retainer Kit To Replace Auto Bumpers Clips And Interior Panel Clips.
- Includes 12 Most Common Sizes That Covers 6.3mm to 10mm Hole Sizes For Exact OEM Replacement Of Broken Retainers.
- Box Compartment Includes Detailed Images Of Size And Quantity For Each Retainer To Help Stay Organized.
- Packaging Includes 12 Different Size Retainers. Each Retainer Comes With 20 pieces. Great For Toyota, Honda, Acura, GM, Chrysler, And Ford.
- Made Of Durable Nylon And Comes With A Box To Store All Your Retainers In One Place.
Description
Packaging Includes:
1/4″ (6.4mm) hole size; panel range: .095″-.540″ – Nylon Shield Retainers –Qty: 20
9/32″ (7.1mm) hole size; panel range: .125″-.310″ – Nylon Shield Retainers — Qty: 20
5/16″ (7.8mm) hole size; panel range: .078″-.490″ -Black Shield Retainers –Qty: 20
23/64″ (9mm) hole size; panel range: .060″-.510″ – Black Shield Retainers –Qty: 20
3/8″ (9.5mm) hole size; panel range: .115″-.565″ -Black Shield Retainers –Qty: 20
25/64″ (10mm) hole size; panel range: .040″-.787″ -Black Shield Retainers –Qty: 20
1/4″ (6.3mm) hole size; panel range: 9/16″ – Black Mud Skirt Blind Rivets – Qty: 20
5/16″ (8mm) hole size; Head diameter: 20mm,Stem length: 11mm – Front fender push-type retainers – Qty: 20
5/16″ (8mm) hole size; head diameter: 20mm – stem length: 20mm -Air baffle to under carriage push-type retainers – Qty: 20
23/64″ (9mm) hole size; head diameter: 18mm – stem length: 28mm – Rear bumper cover push-type retainers – Qty: 20
23/64″ (10mm) hole size; head diameter: 20mm – stem length: 13mm – Push-type retainers – Qty: 20
23/64″ (10mm) hole size; head diameter: 20mm – stem length: 18mm – Push-type retainers – Qty: 20
Fits GM,Ford,Toyota,Honda, Acura
6. ACDelco GT283 GM Original Equipment Black Fuel Tank Cap
Feature
- Provides a tight seal to keep your vehicle’s fuel tank closed
- A sealed fuel tank reduces vapor emissions which helps the environment
- Prevents lost fuel in order to help reduce your trips to the gas station
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
Description
The ACDelco GM Original Equipment Regular Fuel Cap is a threaded cap that seals your vehicle’s fuel tank filler, and is a GM-recommended replacement for your vehicle’s original component. The fuel cap has a rubber gasket that provides a liquid-tight seal to keep fuel in and water and dirt out. The cap may have a check-valve that lets air in or out depending on the air pressure inside the tank. This original equipment regular fuel cap has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
7. labwork 4WD Front Differential Vacuum Actuator Fit for Chevrolet S10 Blazer GMC S15 Jimmy Sonoma Pontiac 6000 Replace 25031740
Feature
- High-quality materials used, enhance durability performance
- Direct replacement for a proper fit and easy installation, meets or exceeds OEM standards
- Replacement number: 25031740
- Fit For 1983-2004 Chevrolet S10
- 1995-2005 Chevrolet Blazer
- 1983-1994 Chevrolet S10 Blazer
- 1991-2004 GMC Sonoma
- Fit For 1983-1990 GMC S15
- 1992-2001 GMC Jimmy
- 1983-1991 GMC S15 Jimmy
- 1988-1990 Pontiac 6000
Description
High-quality materials used, enhance durability performance
Direct replacement for a proper fit and easy installation,with no spring inside
Replacement number: 25031740
Fit For:
1983-2004 Chevrolet S10
1995-2005 Chevrolet Blazer
1983-1994 Chevrolet S10 Blazer
1991-2004 GMC Sonoma
1983-1990 GMC S15
1992-2001 GMC Jimmy
1983-1991 GMC S15 Jimmy
1988-1990 Pontiac 6000
8. Motorad MGC-834T Tethered Fuel Cap
Description
You no longer need to go to the dealer to replace your old, worn out or broken tethered fuel cap. Perfect, affordable option as a direct replacement to your OE tethered cap, ready to install quickly and easily. Manufactured with high quality materials for long lasting durability.
9. Dorman 911-147 Vapor Canister Purge Valve for Select Models
Feature
- Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
- Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Garage
Description
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements. Vehicle model years this part fits: Buick LaCrosse: 2006, 2007, 2008, 2009 Buick Lucerne: 2006, 2007, 2008, 2009, 2010, 2011 Buick Regal: 2011, 2012, 2013 Buick Rendezvous: 2006, 2007 Buick Terraza: 2006, 2007 Buick Verano: 2013, 2014, 2015, 2016 Cadillac DTS: 2006, 2007, 2008, 2009, 2010, 2011 Cadillac SRX: 2006, 2007, 2008, 2009 Cadillac STS: 2006, 2007, 2008, 2009, 2010 Cadillac XLR: 2006, 2007, 2008, 2009 Chevrolet Cobalt: 2008, 2009, 2010 Chevrolet Express 1500: 2008, 2009, 2010, 2011, 2012, 2013, 2014 Chevrolet Express Cargo: 2010, 2011, 2012 Chevrolet HHR: 2008, 2009, 2010 Chevrolet Impala: 2006, 2007, 2008, 2009, 2010, 2011 Chevrolet Malibu: 2006, 2007, 2008, 2009, 2010 Chevrolet Monte Carlo: 2006, 2007 Chevrolet Silverado 1500: 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevrolet Uplander: 2006, 2007, 2008, 2009 GMC Savana 1500: 2008, 2009, 2010, 2011, 2012, 2013, 2014 GMC Sierra 1500: 2007, 2008, 2009, 2010, 2011, 2012, 2013 Pontiac G6: 2006, 2007, 2008, 2009, 2010 Pontiac Grand Prix: 2006, 2007, 2008 Pontiac Montana: 2006, 2007, 2008, 2009 Pontiac Solstice: 2007, 2008, 2009 Saab 9-5: 2011 Saturn Aura: 2007, 2008 Saturn Relay: 2006, 2007 Saturn Sky: 2007, 2008, 2009, 2010 Saturn Vue: 2008, 2009
10. Upgr8 Stainless Steel T-Bolt Clamps Range 2.25" – 2.56" 57MM~65MM For 2" Silicone Coupler Hose (4 Pack)
Feature
- Made from high quality stainless steel
- To ensure a proper fit the thickness of the silicone hose should be 4mm or more.
- Useful on many different applications, radiator hoses, silicone, piping and intake systems.
- Effective Size Range is From 2.25″ – 2.56″ (57mm-65mm)
- Fit 2″ Silicone Hose with INSIDE Diameter
Conclusion
By our suggestions above, we hope that you can found 01 Dts Vacuum Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!
